| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230525-msm8916-labels-v1-4-bec0f5fb46fb@gerhold.net>
Date: Mon, 29 May 2023 14:47:01 +0200
From: Stephan Gerhold <stephan@...hold.net>
To: Bjorn Andersson <andersson@...nel.org>
Cc: Konrad Dybcio <konrad.dybcio@...aro.org>,
Andy Gross <agross@...nel.org>, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Bryan O'Donoghue <bryan.odonoghue@...aro.org>,
Stephan Gerhold <stephan@...hold.net>
Subject: [PATCH 4/6] arm64: dts: qcom: msm8916/39: Clean up MDSS labels
Right now MDSS related definitions cannot be properly grouped together
in board DTs because the labels do not use consistent prefixes. The DSI
PHY label is particularly weird because the DSI number is at the end
(&dsi_phy0) while DSI itself is called &dsi0.
Follow the example of more recent SoCs and give all the MDSS related
nodes a consistent label that allows proper grouping.
Signed-off-by: Stephan Gerhold <stephan@...hold.net>
---
arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 12 +++---
arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi | 4 +-
.../dts/qcom/msm8916-samsung-a2015-common.dtsi | 10 ++---
.../boot/dts/qcom/msm8916-samsung-a3u-eur.dts | 6 +--
arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi | 2 +-
arch/arm64/boot/dts/qcom/msm8916.dtsi | 26 ++++++------
arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi | 10 ++---
arch/arm64/boot/dts/qcom/msm8939.dtsi | 46 +++++++++++-----------
8 files changed, 58 insertions(+), 58 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
index 4f3d837578fd..9081825c9574 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -211,7 +211,7 @@ ports {
port@0 {
reg = <0>;
adv7533_in: endpoint {
- remote-endpoint = <&dsi0_out>;
+ remote-endpoint = <&mdss_dsi0_out>;
};
};
@@ -301,11 +301,6 @@ ov5640_ep: endpoint {
};
};
-&dsi0_out {
- data-lanes = <0 1 2 3>;
- remote-endpoint = <&adv7533_in>;
-};
-
&lpass {
status = "okay";
};
@@ -318,6 +313,11 @@ &mdss {
status = "okay";
};
+&mdss_dsi0_out {
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&adv7533_in>;
+};
+
&mpss {
status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi
index 64d7228bee07..4e7289e6d22d 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi
@@ -15,12 +15,12 @@ &camss {
vdda-supply = <&pm8916_l2>;
};
-&dsi0 {
+&mdss_dsi0 {
vdda-supply = <&pm8916_l2>;
vddio-supply = <&pm8916_l6>;
};
-&dsi_phy0 {
+&mdss_dsi0_phy {
vddio-supply = <&pm8916_l6>;
};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
index 497fc83803ef..b1af9c5d07b2 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
@@ -237,16 +237,16 @@ &blsp_uart2 {
status = "okay";
};
-&dsi0 {
+&mdss {
+ status = "okay";
+};
+
+&mdss_dsi0 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mdss_default>;
pinctrl-1 = <&mdss_sleep>;
};
-&mdss {
- status = "okay";
-};
-
&pm8916_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
index 9068aa6f7b29..e5a569698c4f 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
@@ -85,7 +85,7 @@ &clk_pwm {
status = "okay";
};
-&dsi0 {
+&mdss_dsi0 {
panel@0 {
reg = <0>;
@@ -97,13 +97,13 @@ panel@0 {
port {
panel_in: endpoint {
- remote-endpoint = <&dsi0_out>;
+ remote-endpoint = <&mdss_dsi0_out>;
};
};
};
};
-&dsi0_out {
+&mdss_dsi0_out {
data-lanes = <0 1>;
remote-endpoint = <&panel_in>;
};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi
index 898722ee86a5..ac39ac6a21c1 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi
@@ -86,7 +86,7 @@ &blsp_uart2 {
status = "okay";
};
-/* Remove &dsi_phy0 from clocks to make sure that gcc probes with display disabled */
+/* Remove &mdss_dsi0_phy from clocks to make sure that gcc probes with display disabled */
&gcc {
clocks = <&xo_board>, <&sleep_clk>, <0>, <0>, <0>, <0>, <0>;
};
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 7e6a60e6edef..0028a405e3ec 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -1012,8 +1012,8 @@ gcc: clock-controller@...0000 {
reg = <0x01800000 0x80000>;
clocks = <&xo_board>,
<&sleep_clk>,
- <&dsi_phy0 1>,
- <&dsi_phy0 0>,
+ <&mdss_dsi0_phy 1>,
+ <&mdss_dsi0_phy 0>,
<0>,
<0>,
<0>;
@@ -1062,7 +1062,7 @@ mdss: display-subsystem@...0000 {
#size-cells = <1>;
ranges;
- mdp: display-controller@...1000 {
+ mdss_mdp: display-controller@...1000 {
compatible = "qcom,msm8916-mdp5", "qcom,mdp5";
reg = <0x01a01000 0x89000>;
reg-names = "mdp_phys";
@@ -1087,14 +1087,14 @@ ports {
port@0 {
reg = <0>;
- mdp5_intf1_out: endpoint {
- remote-endpoint = <&dsi0_in>;
+ mdss_mdp_intf1_out: endpoint {
+ remote-endpoint = <&mdss_dsi0_in>;
};
};
};
};
- dsi0: dsi@...8000 {
+ mdss_dsi0: dsi@...8000 {
compatible = "qcom,msm8916-dsi-ctrl",
"qcom,mdss-dsi-ctrl";
reg = <0x01a98000 0x25c>;
@@ -1105,8 +1105,8 @@ dsi0: dsi@...8000 {
assigned-clocks = <&gcc BYTE0_CLK_SRC>,
<&gcc PCLK0_CLK_SRC>;
- assigned-clock-parents = <&dsi_phy0 0>,
- <&dsi_phy0 1>;
+ assigned-clock-parents = <&mdss_dsi0_phy 0>,
+ <&mdss_dsi0_phy 1>;
clocks = <&gcc GCC_MDSS_MDP_CLK>,
<&gcc GCC_MDSS_AHB_CLK>,
@@ -1120,7 +1120,7 @@ dsi0: dsi@...8000 {
"byte",
"pixel",
"core";
- phys = <&dsi_phy0>;
+ phys = <&mdss_dsi0_phy>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1131,20 +1131,20 @@ ports {
port@0 {
reg = <0>;
- dsi0_in: endpoint {
- remote-endpoint = <&mdp5_intf1_out>;
+ mdss_dsi0_in: endpoint {
+ remote-endpoint = <&mdss_mdp_intf1_out>;
};
};
port@1 {
reg = <1>;
- dsi0_out: endpoint {
+ mdss_dsi0_out: endpoint {
};
};
};
};
- dsi_phy0: phy@...8300 {
+ mdss_dsi0_phy: phy@...8300 {
compatible = "qcom,dsi-phy-28nm-lp";
reg = <0x01a98300 0xd4>,
<0x01a98500 0x280>,
diff --git a/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi
index 24393a159058..33e02f42f5e4 100644
--- a/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi
@@ -3,21 +3,21 @@
#include "msm8939.dtsi"
#include "pm8916.dtsi"
-&dsi0 {
+&mdss_dsi0 {
vdda-supply = <&pm8916_l2>;
vddio-supply = <&pm8916_l6>;
};
-&dsi1 {
- vdda-supply = <&pm8916_l2>;
+&mdss_dsi0_phy {
vddio-supply = <&pm8916_l6>;
};
-&dsi_phy0 {
+&mdss_dsi1 {
+ vdda-supply = <&pm8916_l2>;
vddio-supply = <&pm8916_l6>;
};
-&dsi_phy1 {
+&mdss_dsi1_phy {
vddio-supply = <&pm8916_l6>;
};
diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi
index 1196a962897f..0d9f8b951b66 100644
--- a/arch/arm64/boot/dts/qcom/msm8939.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi
@@ -1187,8 +1187,8 @@ gcc: clock-controller@...0000 {
reg = <0x01800000 0x80000>;
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
<&sleep_clk>,
- <&dsi_phy0 1>,
- <&dsi_phy0 0>,
+ <&mdss_dsi0_phy 1>,
+ <&mdss_dsi0_phy 0>,
<0>,
<0>,
<0>;
@@ -1240,7 +1240,7 @@ mdss: display-subsystem@...0000 {
status = "disabled";
- mdp: display-controller@...1000 {
+ mdss_mdp: display-controller@...1000 {
compatible = "qcom,mdp5";
reg = <0x01a01000 0x89000>;
reg-names = "mdp_phys";
@@ -1269,21 +1269,21 @@ ports {
port@0 {
reg = <0>;
- mdp5_intf1_out: endpoint {
- remote-endpoint = <&dsi0_in>;
+ mdss_mdp_intf1_out: endpoint {
+ remote-endpoint = <&mdss_dsi0_in>;
};
};
port@1 {
reg = <1>;
- mdp5_intf2_out: endpoint {
- remote-endpoint = <&dsi1_in>;
+ mdss_mdp_intf2_out: endpoint {
+ remote-endpoint = <&mdss_dsi1_in>;
};
};
};
};
- dsi0: dsi@...8000 {
+ mdss_dsi0: dsi@...8000 {
compatible = "qcom,msm8916-dsi-ctrl",
"qcom,mdss-dsi-ctrl";
reg = <0x01a98000 0x25c>;
@@ -1306,10 +1306,10 @@ dsi0: dsi@...8000 {
"core";
assigned-clocks = <&gcc BYTE0_CLK_SRC>,
<&gcc PCLK0_CLK_SRC>;
- assigned-clock-parents = <&dsi_phy0 0>,
- <&dsi_phy0 1>;
+ assigned-clock-parents = <&mdss_dsi0_phy 0>,
+ <&mdss_dsi0_phy 1>;
- phys = <&dsi_phy0>;
+ phys = <&mdss_dsi0_phy>;
status = "disabled";
#address-cells = <1>;
@@ -1321,20 +1321,20 @@ ports {
port@0 {
reg = <0>;
- dsi0_in: endpoint {
- remote-endpoint = <&mdp5_intf1_out>;
+ mdss_dsi0_in: endpoint {
+ remote-endpoint = <&mdss_mdp_intf1_out>;
};
};
port@1 {
reg = <1>;
- dsi0_out: endpoint {
+ mdss_dsi0_out: endpoint {
};
};
};
};
- dsi_phy0: phy@...8300 {
+ mdss_dsi0_phy: phy@...8300 {
compatible = "qcom,dsi-phy-28nm-lp";
reg = <0x01a98300 0xd4>,
<0x01a98500 0x280>,
@@ -1352,7 +1352,7 @@ dsi_phy0: phy@...8300 {
status = "disabled";
};
- dsi1: dsi@...0000 {
+ mdss_dsi1: dsi@...0000 {
compatible = "qcom,msm8916-dsi-ctrl",
"qcom,mdss-dsi-ctrl";
reg = <0x01aa0000 0x25c>;
@@ -1375,9 +1375,9 @@ dsi1: dsi@...0000 {
"core";
assigned-clocks = <&gcc BYTE1_CLK_SRC>,
<&gcc PCLK1_CLK_SRC>;
- assigned-clock-parents = <&dsi_phy0 0>,
- <&dsi_phy0 1>;
- phys = <&dsi_phy1>;
+ assigned-clock-parents = <&mdss_dsi0_phy 0>,
+ <&mdss_dsi0_phy 1>;
+ phys = <&mdss_dsi1_phy>;
status = "disabled";
ports {
@@ -1386,20 +1386,20 @@ ports {
port@0 {
reg = <0>;
- dsi1_in: endpoint {
- remote-endpoint = <&mdp5_intf2_out>;
+ mdss_dsi1_in: endpoint {
+ remote-endpoint = <&mdss_mdp_intf2_out>;
};
};
port@1 {
reg = <1>;
- dsi1_out: endpoint {
+ mdss_dsi1_out: endpoint {
};
};
};
};
- dsi_phy1: phy@...0300 {
+ mdss_dsi1_phy: phy@...0300 {
compatible = "qcom,dsi-phy-28nm-lp";
reg = <0x01aa0300 0xd4>,
<0x01aa0500 0x280>,
--
2.40.1
Powered by blists - more mailing lists