[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <0fa22575-18d8-5598-1377-7f66c56aa861@gmail.com>
Date: Mon, 29 May 2023 15:40:24 +0200
From: Matthias Brugger <matthias.bgg@...il.com>
To: Arınç ÜNAL <arinc.unal@...nc9.com>,
Frank Wunderlich <frank-w@...lic-files.de>
Cc: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, erkin.bozoglu@...ont.com
Subject: Re: Aw: Re: Re: Re: Re: Re: [PATCH v3 0/5] arm: dts: mt7623: relocate
gmacs, mt7530 switch, and add port@5
On 12/04/2023 19:06, Arınç ÜNAL wrote:
> On 12.04.2023 19:53, Frank Wunderlich wrote:
>> Hi
>>
>>> Gesendet: Mittwoch, 12. April 2023 um 18:21 Uhr
>>> Von: "Arınç ÜNAL" <arinc.unal@...nc9.com>
>>>> thanks, it changes the master when i upgrade iproute to 6.1 (from debian
>>>> bullseye-backports), but i cannot do any traffic on it after switching to
>>>> gmac1...
>>>>
>>>> 5: wan@...1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state
>>>> UP group default qlen 1000
>>>> link/ether f2:d2:51:56:cd:3d brd ff:ff:ff:ff:ff:ff
>>>> inet 192.168.0.11/24 scope global wan
>>>> valid_lft forever preferred_lft forever
>>>>
>>>> see no p5-TX/gmac-rx
>>
>>> Did you apply the vlan and flooding fix patches from Richard?
>>
>> have now applied all patches i've found from richard (which are all rejected):
>>
>> fe4495bb3cc2 2023-02-12 Fix setting up CPU and User ports to be in the correct
>> mode during setup and when toggling vlan_filtering on a bridge port. (HEAD ->
>> 6.3-rc)
>> b0641f3e1a69 2023-02-12 Fix Flooding: Disable by default on User ports and
>> Enable on CPU ports
>> cb04b3451524 2023-02-12 Do not add all User ports to the CPU by default. This
>> will break Multi CPU when added a seperate patch. It will be overwritten by
>> .port_enable and since we are forcing output to a port via the Special Tag
>> this is not needed.
>>
>> and now it seems working and is clear ;)
>>
>> root@...-r2:~# ip l show wan
>> 5: wan@...1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
>> mode DEFAULT group default qlen 1000
>> link/ether f2:d2:51:56:cd:3d brd ff:ff:ff:ff:ff:ff
>>
>> iperf3
>> [ ID] Interval Transfer Bitrate Retr
>> [ 5] 0.00-10.00 sec 1.09 GBytes 940 Mbits/sec 0 sender
>> [ 5] 0.00-10.03 sec 1.09 GBytes 936 Mbits/sec receiver
>>
>>
>> iperf3 -R
>> [ ID] Interval Transfer Bitrate Retr
>> [ 5] 0.00-10.04 sec 1.09 GBytes 936 Mbits/sec 0 sender
>> [ 5] 0.00-10.00 sec 1.09 GBytes 938 Mbits/sec receiver
>>
>>
>> how do you deal with these patches? do you include them into your mt7530 fixes
>> series? they (and vladimirs preferred cpu-port) need to be applied before
>> these DTS-changes
>
> Dealing with this is the last step on my tasklist. Take a look:
>
> https://arinc9.notion.site/mt7530-c-improvements-bbfdc2ceb958484b9627297b88bc6d4a
>
I'm a bit lost here. @frank can this be merged now or are there still oustanding
issues. It seems to me that not, but just in case...
Regards,
Matthias
Powered by blists - more mailing lists