[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <674cecd6-931a-9949-8a81-aa5dd1960b84@gmail.com>
Date: Mon, 29 May 2023 16:01:21 +0200
From: Matthias Brugger <matthias.bgg@...il.com>
To: AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>
Cc: p.zabel@...gutronix.de, airlied@...il.com, daniel@...ll.ch,
robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
jassisinghbrar@...il.com, chunfeng.yun@...iatek.com,
vkoul@...nel.org, kishon@...nel.org, thierry.reding@...il.com,
u.kleine-koenig@...gutronix.de, chunkuang.hu@...nel.org,
ck.hu@...iatek.com, jitao.shi@...iatek.com,
xinlei.lee@...iatek.com, houlong.wei@...iatek.com,
dri-devel@...ts.freedesktop.org,
linux-mediatek@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-phy@...ts.infradead.org, linux-pwm@...r.kernel.org,
kernel@...labora.com, phone-devel@...r.kernel.org,
~postmarketos/upstreaming@...ts.sr.ht
Subject: Re: [PATCH 25/27] arm64: dts: mediatek: mt6795-xperia-m5: Add eMMC,
MicroSD slot, SDIO
On 12/04/2023 13:27, AngeloGioacchino Del Regno wrote:
> Configure and enable the MMC0/1/2 controllers, used for the eMMC chip,
> MicroSD card slot and SDIO (WiFi) respectively.
>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
Applied, thanks
> ---
> .../dts/mediatek/mt6795-sony-xperia-m5.dts | 91 +++++++++++++++++++
> 1 file changed, 91 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
> index debe0f2553d9..155a573eac4c 100644
> --- a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
> @@ -17,6 +17,7 @@ / {
> aliases {
> mmc0 = &mmc0;
> mmc1 = &mmc1;
> + mmc2 = &mmc2;
> serial0 = &uart0;
> serial1 = &uart1;
> };
> @@ -121,7 +122,97 @@ proximity@48 {
> };
> };
>
> +&mmc0 {
> + /* eMMC controller */
> + mediatek,latch-ck = <0x14>; /* hs400 */
> + mediatek,hs200-cmd-int-delay = <1>;
> + mediatek,hs400-cmd-int-delay = <1>;
> + mediatek,hs400-ds-dly3 = <0x1a>;
> + non-removable;
> + pinctrl-names = "default", "state_uhs";
> + pinctrl-0 = <&mmc0_pins_default>;
> + pinctrl-1 = <&mmc0_pins_uhs>;
> + vmmc-supply = <&mt6331_vemc33_reg>;
> + vqmmc-supply = <&mt6331_vio18_reg>;
> + status = "okay";
> +};
> +
> +&mmc1 {
> + /* MicroSD card slot */
> + vmmc-supply = <&mt6331_vmc_reg>;
> + vqmmc-supply = <&mt6331_vmch_reg>;
> + status = "okay";
> +};
> +
> +&mmc2 {
> + /* SDIO WiFi on MMC2 */
> + vmmc-supply = <&mt6331_vmc_reg>;
> + vqmmc-supply = <&mt6331_vmch_reg>;
> + status = "okay";
> +};
> +
> &pio {
> + mmc0_pins_default: emmc-sdr-pins {
> + pins-cmd-dat {
> + pinmux = <PINMUX_GPIO154__FUNC_MSDC0_DAT0>,
> + <PINMUX_GPIO155__FUNC_MSDC0_DAT1>,
> + <PINMUX_GPIO156__FUNC_MSDC0_DAT2>,
> + <PINMUX_GPIO157__FUNC_MSDC0_DAT3>,
> + <PINMUX_GPIO158__FUNC_MSDC0_DAT4>,
> + <PINMUX_GPIO159__FUNC_MSDC0_DAT5>,
> + <PINMUX_GPIO160__FUNC_MSDC0_DAT6>,
> + <PINMUX_GPIO161__FUNC_MSDC0_DAT7>,
> + <PINMUX_GPIO162__FUNC_MSDC0_CMD>;
> + input-enable;
> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> + };
> +
> + pins-clk {
> + pinmux = <PINMUX_GPIO163__FUNC_MSDC0_CLK>;
> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> + };
> +
> + pins-rst {
> + pinmux = <PINMUX_GPIO165__FUNC_MSDC0_RSTB>;
> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
> + };
> + };
> +
> + mmc0_pins_uhs: emmc-uhs-pins {
> + pins-cmd-dat {
> + pinmux = <PINMUX_GPIO154__FUNC_MSDC0_DAT0>,
> + <PINMUX_GPIO155__FUNC_MSDC0_DAT1>,
> + <PINMUX_GPIO156__FUNC_MSDC0_DAT2>,
> + <PINMUX_GPIO157__FUNC_MSDC0_DAT3>,
> + <PINMUX_GPIO158__FUNC_MSDC0_DAT4>,
> + <PINMUX_GPIO159__FUNC_MSDC0_DAT5>,
> + <PINMUX_GPIO160__FUNC_MSDC0_DAT6>,
> + <PINMUX_GPIO161__FUNC_MSDC0_DAT7>,
> + <PINMUX_GPIO162__FUNC_MSDC0_CMD>;
> + input-enable;
> + drive-strength = <MTK_DRIVE_6mA>;
> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> + };
> +
> + pins-clk {
> + pinmux = <PINMUX_GPIO163__FUNC_MSDC0_CLK>;
> + drive-strength = <MTK_DRIVE_6mA>;
> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> + };
> +
> + pins-rst {
> + pinmux = <PINMUX_GPIO165__FUNC_MSDC0_RSTB>;
> + drive-strength = <MTK_DRIVE_6mA>;
> + bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
> + };
> +
> + pins-ds {
> + pinmux = <PINMUX_GPIO164__FUNC_MSDC0_DSL>;
> + drive-strength = <MTK_DRIVE_6mA>;
> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> + };
> + };
> +
> nfc_pins: nfc-pins {
> pins-irq {
> pinmux = <PINMUX_GPIO3__FUNC_GPIO3>;
Powered by blists - more mailing lists