| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230529162034.20481-7-alexandre.torgue@foss.st.com>
Date: Mon, 29 May 2023 18:20:29 +0200
From: Alexandre Torgue <alexandre.torgue@...s.st.com>
To: <robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will@...nel.org>, Arnd Bergmann <arnd@...db.de>,
Olof Johansson <olof@...om.net>, <soc@...nel.org>
CC: <linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-kernel@...r.kernel.org>, <linux-gpio@...r.kernel.org>
Subject: [PATCH 06/11] arm64: dts: st: introduce stm32mp25 SoCs family
STM32MP25 family is composed of 4 SoCs defined as following:
-STM32MP251: common part composed of 1*Cortex-A35, common peripherals like
SDMMC, UART, SPI, I2C, PCIe, USB3, parallel and DSI display, 1*ETH ...
-STM32MP253: STM32MP251 + 1*Cortex-A35 (dual CPU), a second ETH, CAN-FD and
LVDS display.
-STM32MP255: STM32MP253 + GPU/AI and video encode/decode.
-STM32MP257: STM32MP255 + ETH TSN switch (2+1 ports).
A second diversity layer exists for security features/ A35 frequency:
-STM32MP25xY, "Y" gives information:
-Y = A means A35@...GHz + no cryp IP and no secure boot.
-Y = C means A35@...GHz + cryp IP and secure boot.
-Y = D means A35@...GHz + no cryp IP and no secure boot.
-Y = F means A35@...GHz + cryp IP and secure boot.
Signed-off-by: Alexandre Torgue <alexandre.torgue@...s.st.com>
diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
new file mode 100644
index 000000000000..5268a4321841
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -0,0 +1,279 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@...s.st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a35";
+ device_type = "cpu";
+ reg = <0>;
+ enable-method = "psci";
+ };
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a35-pmu";
+ interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>;
+ interrupt-parent = <&intc>;
+ };
+
+ clocks {
+ ck_flexgen_08: ck-flexgen-08 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <100000000>;
+ };
+
+ ck_flexgen_51: ck-flexgen-51 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <200000000>;
+ };
+
+ ck_icn_ls_mcu: ck-icn-ls-mcu {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <200000000>;
+ };
+ };
+
+ firmware {
+ optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
+
+ scmi {
+ compatible = "linaro,scmi-optee";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ linaro,optee-channel-id = <0>;
+
+ scmi_clk: protocol@14 {
+ reg = <0x14>;
+ #clock-cells = <1>;
+ };
+
+ scmi_reset: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+ };
+
+ intc: interrupt-controller@...00000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0x0 0x4ac10000 0x0 0x1000>,
+ <0x0 0x4ac20000 0x0 0x2000>,
+ <0x0 0x4ac40000 0x0 0x2000>,
+ <0x0 0x4ac60000 0x0 0x2000>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ always-on;
+ };
+
+ soc@0 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+ ranges = <0x0 0x0 0x0 0x80000000>;
+
+ rifsc: rifsc-bus@...80000 {
+ compatible = "simple-bus";
+ reg = <0x42080000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ usart2: serial@...e0000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x400e0000 0x400>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ck_flexgen_08>;
+ status = "disabled";
+ };
+ };
+
+ syscfg: syscon@...30000 {
+ compatible = "st,stm32mp25-syscfg", "syscon";
+ reg = <0x44230000 0x10000>;
+ };
+
+ pinctrl: pinctrl@...40000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stm32mp257-pinctrl";
+ ranges = <0 0x44240000 0xa0400>;
+ pins-are-numbered;
+
+ gpioa: gpio@...40000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0x400>;
+ clocks = <&ck_icn_ls_mcu>;
+ st,bank-name = "GPIOA";
+ status = "disabled";
+ };
+
+ gpiob: gpio@...50000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x10000 0x400>;
+ clocks = <&ck_icn_ls_mcu>;
+ st,bank-name = "GPIOB";
+ status = "disabled";
+ };
+
+ gpioc: gpio@...60000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x20000 0x400>;
+ clocks = <&ck_icn_ls_mcu>;
+ st,bank-name = "GPIOC";
+ status = "disabled";
+ };
+
+ gpiod: gpio@...70000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x30000 0x400>;
+ clocks = <&ck_icn_ls_mcu>;
+ st,bank-name = "GPIOD";
+ status = "disabled";
+ };
+
+ gpioe: gpio@...80000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x400>;
+ clocks = <&ck_icn_ls_mcu>;
+ st,bank-name = "GPIOE";
+ status = "disabled";
+ };
+
+ gpiof: gpio@...90000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x50000 0x400>;
+ clocks = <&ck_icn_ls_mcu>;
+ st,bank-name = "GPIOF";
+ status = "disabled";
+ };
+
+ gpiog: gpio@...a0000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x60000 0x400>;
+ clocks = <&ck_icn_ls_mcu>;
+ st,bank-name = "GPIOG";
+ status = "disabled";
+ };
+
+ gpioh: gpio@...b0000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x70000 0x400>;
+ clocks = <&ck_icn_ls_mcu>;
+ st,bank-name = "GPIOH";
+ status = "disabled";
+ };
+
+ gpioi: gpio@...c0000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x80000 0x400>;
+ clocks = <&ck_icn_ls_mcu>;
+ st,bank-name = "GPIOI";
+ status = "disabled";
+ };
+
+ gpioj: gpio@...d0000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x90000 0x400>;
+ clocks = <&ck_icn_ls_mcu>;
+ st,bank-name = "GPIOJ";
+ status = "disabled";
+ };
+
+ gpiok: gpio@...e0000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0xa0000 0x400>;
+ clocks = <&ck_icn_ls_mcu>;
+ st,bank-name = "GPIOK";
+ status = "disabled";
+ };
+ };
+
+ pinctrl_z: pinctrl@...00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stm32mp257-z-pinctrl";
+ ranges = <0 0x46200000 0x400>;
+ pins-are-numbered;
+
+ gpioz: gpio@...00000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0 0x400>;
+ clocks = <&ck_icn_ls_mcu>;
+ st,bank-name = "GPIOZ";
+ st,bank-ioport = <11>;
+ status = "disabled";
+ };
+
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp253.dtsi b/arch/arm64/boot/dts/st/stm32mp253.dtsi
new file mode 100644
index 000000000000..af48e82efe8a
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp253.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@...s.st.com> for STMicroelectronics.
+ */
+#include "stm32mp251.dtsi"
+
+/ {
+ cpus {
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a35";
+ device_type = "cpu";
+ reg = <1>;
+ enable-method = "psci";
+ };
+ };
+
+ arm-pmu {
+ interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>;
+ };
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp255.dtsi b/arch/arm64/boot/dts/st/stm32mp255.dtsi
new file mode 100644
index 000000000000..e6fa596211f5
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp255.dtsi
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@...s.st.com> for STMicroelectronics.
+ */
+#include "stm32mp253.dtsi"
+
+/ {
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp257.dtsi b/arch/arm64/boot/dts/st/stm32mp257.dtsi
new file mode 100644
index 000000000000..5c5000d3d9db
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp257.dtsi
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@...s.st.com> for STMicroelectronics.
+ */
+#include "stm32mp255.dtsi"
+
+/ {
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp25xc.dtsi b/arch/arm64/boot/dts/st/stm32mp25xc.dtsi
new file mode 100644
index 000000000000..5e83a6926485
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp25xc.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@...s.st.com> for STMicroelectronics.
+ */
+
+/ {
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp25xf.dtsi b/arch/arm64/boot/dts/st/stm32mp25xf.dtsi
new file mode 100644
index 000000000000..5e83a6926485
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp25xf.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@...s.st.com> for STMicroelectronics.
+ */
+
+/ {
+};
--
2.17.1
Powered by blists - more mailing lists