| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230530141641.1155691-5-boerge.struempfel@gmail.com>
Date: Tue, 30 May 2023 16:16:40 +0200
From: Boerge Struempfel <boerge.struempfel@...il.com>
To: unlisted-recipients:; (no To-header on input)
Cc: boerge.struempfel@...il.com, bstruempfel@...ratronik.de,
andy.shevchenko@...il.com, festevam@...il.com,
amit.kumar-mahapatra@....com, broonie@...nel.org,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
NXP Linux Team <linux-imx@....com>,
linux-spi@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v7 4/5] spi: spidev_test: Sorted the options into logical groups
In order to increase usability, the command line options are sorted into
logical groups. In addition, the usage string was sorted alphabetically,
and the missing parameters '8','i' and 'o' were added. Furthermore, the
option descriptions were moved further to the right, in order to allow
for longer option names.
Signed-off-by: Boerge Struempfel <boerge.struempfel@...il.com>
---
tools/spi/spidev_test.c | 90 ++++++++++++++++++++++-------------------
1 file changed, 48 insertions(+), 42 deletions(-)
diff --git a/tools/spi/spidev_test.c b/tools/spi/spidev_test.c
index b0ca44c70e83..2d2cee339b39 100644
--- a/tools/spi/spidev_test.c
+++ b/tools/spi/spidev_test.c
@@ -172,28 +172,34 @@
static void print_usage(const char *prog)
{
- printf("Usage: %s [-DsbdlHOLC3vpNR24SI]\n", prog);
- puts(" -D --device device to use (default /dev/spidev1.1)\n"
- " -s --speed max speed (Hz)\n"
- " -d --delay delay (usec)\n"
- " -b --bpw bits per word\n"
- " -i --input input data from a file (e.g. \"test.bin\")\n"
- " -o --output output data to a file (e.g. \"results.bin\")\n"
- " -l --loop loopback\n"
- " -H --cpha clock phase\n"
- " -O --cpol clock polarity\n"
- " -L --lsb least significant bit first\n"
- " -C --cs-high chip select active high\n"
- " -3 --3wire SI/SO signals shared\n"
- " -v --verbose Verbose (show tx buffer)\n"
- " -p Send data (e.g. \"1234\\xde\\xad\")\n"
- " -N --no-cs no chip select\n"
- " -R --ready slave pulls low to pause\n"
- " -2 --dual dual transfer\n"
- " -4 --quad quad transfer\n"
- " -8 --octal octal transfer\n"
- " -S --size transfer size\n"
- " -I --iter iterations\n");
+ printf("Usage: %s [-2348CDHILNORSbdilopsv]\n", prog);
+ puts("general device settings:\n"
+ " -D --device device to use (default /dev/spidev1.1)\n"
+ " -s --speed max speed (Hz)\n"
+ " -d --delay delay (usec)\n"
+ " -l --loop loopback\n"
+ "spi mode:\n"
+ " -H --cpha clock phase\n"
+ " -O --cpol clock polarity\n"
+ "number of wires for transmission:\n"
+ " -2 --dual dual transfer\n"
+ " -4 --quad quad transfer\n"
+ " -8 --octal octal transfer\n"
+ " -3 --3wire SI/SO signals shared\n"
+ "data:\n"
+ " -i --input input data from a file (e.g. \"test.bin\")\n"
+ " -o --output output data to a file (e.g. \"results.bin\")\n"
+ " -p Send data (e.g. \"1234\\xde\\xad\")\n"
+ " -S --size transfer size\n"
+ " -I --iter iterations\n"
+ "additional parameters:\n"
+ " -b --bpw bits per word\n"
+ " -L --lsb least significant bit first\n"
+ " -C --cs-high chip select active high\n"
+ " -N --no-cs no chip select\n"
+ " -R --ready slave pulls low to pause\n"
+ "misc:\n"
+ " -v --verbose Verbose (show tx buffer)\n");
exit(1);
}
@@ -201,26 +207,26 @@ static void parse_opts(int argc, char *argv[])
{
while (1) {
static const struct option lopts[] = {
- { "device", 1, 0, 'D' },
- { "speed", 1, 0, 's' },
- { "delay", 1, 0, 'd' },
- { "bpw", 1, 0, 'b' },
- { "input", 1, 0, 'i' },
- { "output", 1, 0, 'o' },
- { "loop", 0, 0, 'l' },
- { "cpha", 0, 0, 'H' },
- { "cpol", 0, 0, 'O' },
- { "lsb", 0, 0, 'L' },
- { "cs-high", 0, 0, 'C' },
- { "3wire", 0, 0, '3' },
- { "no-cs", 0, 0, 'N' },
- { "ready", 0, 0, 'R' },
- { "dual", 0, 0, '2' },
- { "verbose", 0, 0, 'v' },
- { "quad", 0, 0, '4' },
- { "octal", 0, 0, '8' },
- { "size", 1, 0, 'S' },
- { "iter", 1, 0, 'I' },
+ { "device", 1, 0, 'D' },
+ { "speed", 1, 0, 's' },
+ { "delay", 1, 0, 'd' },
+ { "loop", 0, 0, 'l' },
+ { "cpha", 0, 0, 'H' },
+ { "cpol", 0, 0, 'O' },
+ { "dual", 0, 0, '2' },
+ { "quad", 0, 0, '4' },
+ { "octal", 0, 0, '8' },
+ { "3wire", 0, 0, '3' },
+ { "input", 1, 0, 'i' },
+ { "output", 1, 0, 'o' },
+ { "size", 1, 0, 'S' },
+ { "iter", 1, 0, 'I' },
+ { "bpw", 1, 0, 'b' },
+ { "lsb", 0, 0, 'L' },
+ { "cs-high", 0, 0, 'C' },
+ { "no-cs", 0, 0, 'N' },
+ { "ready", 0, 0, 'R' },
+ { "verbose", 0, 0, 'v' },
{ NULL, 0, 0, 0 },
};
int c;
--
2.40.1
Powered by blists - more mailing lists