| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 30 May 2023 14:31:37 -0700
From: Bjorn Andersson <quic_bjorande@...cinc.com>
To: Konrad Dybcio <konrad.dybcio@...aro.org>
CC: Bjorn Andersson <andersson@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
<linux-arm-msm@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 2/2] soc: qcom: rmtfs: Support dynamic placement of region
On Tue, May 30, 2023 at 09:45:10PM +0200, Konrad Dybcio wrote:
>
>
> On 30.05.2023 21:34, Bjorn Andersson wrote:
> > In some configurations, the exact placement of the rmtfs shared memory
> > region isn't so strict. In the current implementation the author of the
> > DeviceTree source is forced to make up a memory region.
> IIUC the test here would be... "works" / "doesn't", just as if one
> misplaced the fixed region?
>
The patch makes no effort to clarify this part.
> Does the downstream sharedmem-uio driver do any additional cryptic
> magic or does it simply rely on the vendor's cma/dma pool settings?
> Can we replicate its behavior to stop hardcoding rmtfs, period?
>
Alignment on that is the intention with this patchset.
> >
> > Extend the rmtfs memory driver to relieve the author of this
> > responsibility by introducing support for using dynamic allocation in
> > the driver.
> >
> > Signed-off-by: Bjorn Andersson <quic_bjorande@...cinc.com>
> > ---
> > arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 10 ++++
> > drivers/soc/qcom/rmtfs_mem.c | 66 +++++++++++++++++++------
> > 2 files changed, 61 insertions(+), 15 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
> > index d1440b790fa6..e6191b8ba4c6 100644
> > --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
> > +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
> > @@ -12,6 +12,8 @@
> > #include "pm8998.dtsi"
> > #include "pmi8998.dtsi"
> >
> > +/delete-node/ &rmtfs_mem;
> > +
> > / {
> > model = "Qualcomm Technologies, Inc. SDM845 MTP";
> > compatible = "qcom,sdm845-mtp", "qcom,sdm845";
> > @@ -48,6 +50,14 @@ vreg_s4a_1p8: pm8998-smps4 {
> > vin-supply = <&vph_pwr>;
> > };
> >
> > + rmtfs {
> > + compatible = "qcom,rmtfs-mem";
> > +
> > + qcom,alloc-size = <(2*1024*1024)>;
> > + qcom,client-id = <1>;
> > + qcom,vmid = <15>;
> > + };
> This should have been a separate patch.
>
Of course, I should have paid more attention when I did the last git
add, to not include test code...
> > +
> > thermal-zones {
> > xo_thermal: xo-thermal {
> > polling-delay-passive = <0>;
> > diff --git a/drivers/soc/qcom/rmtfs_mem.c b/drivers/soc/qcom/rmtfs_mem.c
> > index f83811f51175..5f56ded9f905 100644
> > --- a/drivers/soc/qcom/rmtfs_mem.c
> > +++ b/drivers/soc/qcom/rmtfs_mem.c
> > @@ -3,6 +3,8 @@
> > * Copyright (c) 2017 Linaro Ltd.
> > */
> >
> > +#include "linux/gfp_types.h"
> > +#include "linux/sizes.h"
> <>?
>
> > #include <linux/kernel.h>
> > #include <linux/cdev.h>
> > #include <linux/err.h>
> > @@ -168,23 +170,63 @@ static void qcom_rmtfs_mem_release_device(struct device *dev)
> > kfree(rmtfs_mem);
> > }
> >
> > +static int qcom_rmtfs_acquire_mem(struct device *dev, struct qcom_rmtfs_mem *rmtfs_mem)
> > +{
> > + struct device_node *node = dev->of_node;
> > + struct reserved_mem *rmem;
> > + dma_addr_t dma_addr;
> > + void *mem;
> > + u32 size;
> > + int ret;
> > +
> > + rmem = of_reserved_mem_lookup(node);
> > + if (rmem) {
> > + rmtfs_mem->addr = rmem->base;
> > + rmtfs_mem->size = rmem->size;
> > +
> > + rmtfs_mem->base = devm_memremap(&rmtfs_mem->dev, rmtfs_mem->addr,
> > + rmtfs_mem->size, MEMREMAP_WC);
> > + if (IS_ERR(rmtfs_mem->base)) {
> > + dev_err(dev, "failed to remap rmtfs_mem region\n");
> > + return PTR_ERR(rmtfs_mem->base);
> > + }
> > +
> > + return 0;
> > + }
> > +
> > + ret = of_property_read_u32(node, "qcom,alloc-size", &size);
> > + if (ret < 0) {
> > + dev_err(dev, "rmtfs of unknown size\n");
> > + return -EINVAL;
> > + }
> > +
> > + /*
> > + * Ensure that the protected region isn't adjacent to other protected
> > + * regions by allocating an empty page on either side.
> > + */
> > + mem = dma_alloc_coherent(dev, size + 2 * SZ_4K, &dma_addr, GFP_KERNEL);
> Should this be made pagesize-independent? Can we even run non-4K kernels on msm?
>
Yes, I fixed the issue in UFS and I believe Alex corrected the bug in
IPA. With that I've been able to boot the few platforms where I've tried
it with 16KB PAGE_SIZE.
That's however the Linux page size, the numbers here relates to things
on the secure side.
Regards,
Bjorn
> Konrad
> > + if (mem) {
> > + rmtfs_mem->base = mem + SZ_4K;
> > + rmtfs_mem->addr = dma_addr + SZ_4K;
> > + rmtfs_mem->size = size;
> > +
> > + return 0;
> > + }
> > +
> > + dev_err(dev, "unable to allocate memory for rmtfs mem\n");
> > + return -ENOMEM;
> > +}
> > +
> > static int qcom_rmtfs_mem_probe(struct platform_device *pdev)
> > {
> > struct device_node *node = pdev->dev.of_node;
> > struct qcom_scm_vmperm perms[NUM_MAX_VMIDS + 1];
> > - struct reserved_mem *rmem;
> > struct qcom_rmtfs_mem *rmtfs_mem;
> > u32 client_id;
> > u32 vmid[NUM_MAX_VMIDS];
> > int num_vmids;
> > int ret, i;
> >
> > - rmem = of_reserved_mem_lookup(node);
> > - if (!rmem) {
> > - dev_err(&pdev->dev, "failed to acquire memory region\n");
> > - return -EINVAL;
> > - }
> > -
> > ret = of_property_read_u32(node, "qcom,client-id", &client_id);
> > if (ret) {
> > dev_err(&pdev->dev, "failed to parse \"qcom,client-id\"\n");
> > @@ -196,22 +238,16 @@ static int qcom_rmtfs_mem_probe(struct platform_device *pdev)
> > if (!rmtfs_mem)
> > return -ENOMEM;
> >
> > - rmtfs_mem->addr = rmem->base;
> > rmtfs_mem->client_id = client_id;
> > - rmtfs_mem->size = rmem->size;
> >
> > device_initialize(&rmtfs_mem->dev);
> > rmtfs_mem->dev.parent = &pdev->dev;
> > rmtfs_mem->dev.groups = qcom_rmtfs_mem_groups;
> > rmtfs_mem->dev.release = qcom_rmtfs_mem_release_device;
> >
> > - rmtfs_mem->base = devm_memremap(&rmtfs_mem->dev, rmtfs_mem->addr,
> > - rmtfs_mem->size, MEMREMAP_WC);
> > - if (IS_ERR(rmtfs_mem->base)) {
> > - dev_err(&pdev->dev, "failed to remap rmtfs_mem region\n");
> > - ret = PTR_ERR(rmtfs_mem->base);
> > + ret = qcom_rmtfs_acquire_mem(&pdev->dev, rmtfs_mem);
> > + if (ret < 0)
> > goto put_device;
> > - }
> >
> > cdev_init(&rmtfs_mem->cdev, &qcom_rmtfs_mem_fops);
> > rmtfs_mem->cdev.owner = THIS_MODULE;
Powered by blists - more mailing lists