lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAK00qKBR+7_snFFavZhz6AF9nEfEaO2yZa8+y1tuUda5wRY9Zg@mail.gmail.com>
Date:   Tue, 30 May 2023 17:51:30 +0800
From:   Victor Shih <victorshihgli@...il.com>
To:     Ben Chuang <benchuanggli@...il.com>
Cc:     ulf.hansson@...aro.org, adrian.hunter@...el.com,
        linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org,
        HL.Liu@...esyslogic.com.tw, Greg.tu@...esyslogic.com.tw,
        Victor Shih <victor.shih@...esyslogic.com.tw>,
        Ben Chuang <ben.chuang@...esyslogic.com.tw>
Subject: Re: [PATCH V1 3/3] mmc: sdhci-pci-gli: Add support SD Express card
 for GL9767

Hi, Ben

On Mon, May 15, 2023 at 8:15 AM Ben Chuang <benchuanggli@...il.com> wrote:
>
> Hi Victor,
>
> On Fri, May 12, 2023 at 6:47 PM Victor Shih <victorshihgli@...il.com> wrote:
> >
> > Add support SD Express card for GL9767. The workflow of the
> > SD Express card in GL9767 is as below.
> > 1. GL9767 operates in SD mode and set MMC_CAP2_SD_EXP flag.
> > 2. If card is inserted, Host send CMD8 to ask the capabilities
> >    of the card.
> > 3. If the card has PCIe capability and write protect is not
> >    enable, then init_sd_express() will be invoked.
> > 4. GL9767 switch from SD mode to PCIe/NVMe mode and mmc driver
> >    handover control to NVMe driver.
> > 5. If card is removed, GL9767 will return to SD mode.
> >
> > Signed-off-by: Ben Chuang <ben.chuang@...esyslogic.com.tw>
> > Signed-off-by: Victor Shih <victor.shih@...esyslogic.com.tw>
> > ---
> >  drivers/mmc/host/sdhci-pci-gli.c | 115 +++++++++++++++++++++++++++++++
> >  1 file changed, 115 insertions(+)
> >
> > diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
> > index 300512740cb0..a0f9c24439be 100644
> > --- a/drivers/mmc/host/sdhci-pci-gli.c
> > +++ b/drivers/mmc/host/sdhci-pci-gli.c
> > @@ -158,6 +158,13 @@
> >  #define   GLI_9767_VHS_REV_M     0x1
> >  #define   GLI_9767_VHS_REV_W     0x2
> >
> > +#define PCIE_GLI_9767_CFG              0x8A0
> > +#define   PCIE_GLI_9767_CFG_LOW_PWR_OFF          BIT(12)
> > +
> > +#define PCIE_GLI_9767_COMBO_MUX_CTL                    0x8C8
> > +#define   PCIE_GLI_9767_COMBO_MUX_CTL_RST_EN             BIT(6)
> > +#define   PCIE_GLI_9767_COMBO_MUX_CTL_WAIT_PERST_EN      BIT(10)
> > +
> >  #define PCIE_GLI_9767_PWR_MACRO_CTL                                    0x8D0
> >  #define   PCIE_GLI_9767_PWR_MACRO_CTL_LOW_VOLTAGE                        GENMASK(3, 0)
> >  #define   PCIE_GLI_9767_PWR_MACRO_CTL_LD0_LOW_OUTPUT_VOLTAGE             GENMASK(15, 12)
> > @@ -175,6 +182,27 @@
> >  #define   PCIE_GLI_9767_SCR_CORE_PWR_D3_OFF              BIT(21)
> >  #define   PCIE_GLI_9767_SCR_CFG_RST_DATA_LINK_DOWN       BIT(30)
> >
> > +#define PCIE_GLI_9767_SDHC_CAP                 0x91C
> > +#define   PCIE_GLI_9767_SDHC_CAP_SDEI_RESULT     BIT(5)
> > +
> > +#define PCIE_GLI_9767_SD_EXPRESS_CTL                   0x940
> > +#define   PCIE_GLI_9767_SD_EXPRESS_CTL_SDEI_EXE                  BIT(0)
> > +#define   PCIE_GLI_9767_SD_EXPRESS_CTL_SD_EXPRESS_MODE   BIT(1)
> > +
> > +#define PCIE_GLI_9767_SD_DATA_MULTI_CTL                                0x944
> > +#define   PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME        GENMASK(23, 16)
> > +#define   PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME_VALUE          0x64
> > +
> > +#define PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2                       0x950
> > +#define   PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2_SDEI_COMPLETE         BIT(0)
> > +#define   PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2_SDEI_GEN_TIMER        GENMASK(1, 0)
> > +
> > +#define PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_EN_REG2                            0x954
> > +#define   PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_EN_REG2_SDEI_COMPLETE_STATUS_EN    GENMASK(1, 0)
> > +
> > +#define PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2                            0x958
> > +#define   PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2_SDEI_COMPLETE_SIGNAL_EN    GENMASK(1, 0)
> > +
> >  #define GLI_MAX_TUNING_LOOP 40
> >
> >  /* Genesys Logic chipset */
> > @@ -774,6 +802,91 @@ static void sdhci_gl9767_reset(struct sdhci_host *host, u8 mask)
> >         gli_set_9767(host);
> >  }
> >
> > +static int gl9767_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios)
> > +{
> > +       struct sdhci_host *host = mmc_priv(mmc);
> > +       struct sdhci_pci_slot *slot = sdhci_priv(host);
> > +       struct pci_dev *pdev;
> > +       u32 value;
> > +       int i;
> > +
> > +       pdev = slot->chip->pdev;
> > +
> > +       if (sdhci_check_ro(host)) {
> > +               mmc->ios.timing &= ~(MMC_TIMING_SD_EXP | MMC_TIMING_SD_EXP_1_2V);
> > +               return 0;
> > +       }
> > +
> > +       pci_read_config_dword(pdev, PCIE_GLI_9767_VHS, &value);
> > +       value &= ~GLI_9767_VHS_REV;
> > +       value |= FIELD_PREP(GLI_9767_VHS_REV, GLI_9767_VHS_REV_W);
> > +       pci_write_config_dword(pdev, PCIE_GLI_9767_VHS, value);
> > +
> > +       pci_read_config_dword(pdev, PCIE_GLI_9767_COMBO_MUX_CTL, &value);
> > +       value &= ~(PCIE_GLI_9767_COMBO_MUX_CTL_RST_EN | PCIE_GLI_9767_COMBO_MUX_CTL_WAIT_PERST_EN);
> > +       pci_write_config_dword(pdev, PCIE_GLI_9767_COMBO_MUX_CTL, value);
> > +
> > +       pci_read_config_dword(pdev, PCIE_GLI_9767_SD_DATA_MULTI_CTL, &value);
> > +       value &= ~PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME;
> > +       value |= FIELD_PREP(PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME,
> > +                           PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME_VALUE);
> > +       pci_write_config_dword(pdev, PCIE_GLI_9767_SD_DATA_MULTI_CTL, value);
> > +
> > +       pci_read_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2, &value);
> > +       value |= PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2_SDEI_GEN_TIMER;
> > +       pci_write_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2, value);
> > +
> > +       pci_read_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_EN_REG2, &value);
> > +       value |= PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_EN_REG2_SDEI_COMPLETE_STATUS_EN;
> > +       pci_write_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_EN_REG2, value);
> > +
> > +       pci_read_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2, &value);
> > +       value |= PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2_SDEI_COMPLETE_SIGNAL_EN;
> > +       pci_write_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2, value);
> > +
> > +       pci_read_config_dword(pdev, PCIE_GLI_9767_CFG, &value);
> > +       value |= PCIE_GLI_9767_CFG_LOW_PWR_OFF;
> > +       pci_write_config_dword(pdev, PCIE_GLI_9767_CFG, value);
> > +
> > +       value = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
> > +       value &= ~(SDHCI_CLOCK_CARD_EN | SDHCI_CLOCK_PLL_EN);
> > +       sdhci_writew(host, value, SDHCI_CLOCK_CONTROL);
> > +
> > +       value = sdhci_readb(host, SDHCI_POWER_CONTROL);
> > +       value |= ((SDHCI_POWER_180 | SDHCI_POWER_ON) << 4);
> > +       sdhci_writeb(host, value, SDHCI_POWER_CONTROL);
> > +
> > +       pci_read_config_dword(pdev, PCIE_GLI_9767_SD_EXPRESS_CTL, &value);
> > +       value |= PCIE_GLI_9767_SD_EXPRESS_CTL_SDEI_EXE;
> > +       pci_write_config_dword(pdev, PCIE_GLI_9767_SD_EXPRESS_CTL, value);
> > +
> > +       for (i = 0; i < 10; i++) {
> > +               mdelay(10);
>
> A little question.
> Can you explain or comment on the reason for up to 10 loops (max. 100 ms wait),
> For example "because of asic specs..." or "hardware measurements".
>
> Best regards,
> Ben
>

Because specs define the time between Power valid to CLKREQ at most 1ms.
To be on the safe side I will update to 3 loops(max. 30 ms wait) in Patch v2.

> > +               pci_read_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2, &value);
> > +               if (value & PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2_SDEI_COMPLETE) {
> > +                       pci_write_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2,
> > +                                              value);
> > +                       break;
> > +               }
> > +       }
> > +
> > +       pci_read_config_dword(pdev, PCIE_GLI_9767_SDHC_CAP, &value);
> > +       if ((value & PCIE_GLI_9767_SDHC_CAP_SDEI_RESULT) == PCIE_GLI_9767_SDHC_CAP_SDEI_RESULT) {
> > +               pci_read_config_dword(pdev, PCIE_GLI_9767_SD_EXPRESS_CTL, &value);
> > +               value |= PCIE_GLI_9767_SD_EXPRESS_CTL_SD_EXPRESS_MODE;
> > +               pci_write_config_dword(pdev, PCIE_GLI_9767_SD_EXPRESS_CTL, value);
> > +       } else {
> > +               mmc->ios.timing &= ~(MMC_TIMING_SD_EXP | MMC_TIMING_SD_EXP_1_2V);
> > +       }
> > +
> > +       pci_read_config_dword(pdev, PCIE_GLI_9767_VHS, &value);
> > +       value &= ~GLI_9767_VHS_REV;
> > +       value |= FIELD_PREP(GLI_9767_VHS_REV, GLI_9767_VHS_REV_R);
> > +       pci_write_config_dword(pdev, PCIE_GLI_9767_VHS, value);
> > +
> > +       return 0;
> > +}
> > +
> >  static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot)
> >  {
> >         struct sdhci_host *host = slot->host;
> > @@ -806,6 +919,8 @@ static int gli_probe_slot_gl9767(struct sdhci_pci_slot *slot)
> >         gl9767_hw_setting(slot);
> >         gli_pcie_enable_msi(slot);
> >         slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
> > +       host->mmc->caps2 |= MMC_CAP2_SD_EXP;
> > +       host->mmc_host_ops.init_sd_express = gl9767_init_sd_express;
> >         sdhci_enable_v4_mode(host);
> >
> >         return 0;
> > --
> > 2.25.1
> >

Thanks, Victor Shih

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ