linux-kernel - [PATCH v1 00/15] Maintenance updates for Protonic Holland boards

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230530120345.2874900-1-o.rempel@pengutronix.de>
Date:   Tue, 30 May 2023 14:03:30 +0200
From:   Oleksij Rempel <o.rempel@...gutronix.de>
To:     Shawn Guo <shawnguo@...nel.org>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc:     Oleksij Rempel <o.rempel@...gutronix.de>, kernel@...gutronix.de,
        linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        NXP Linux Team <linux-imx@....com>,
        Fabio Estevam <festevam@...il.com>
Subject: [PATCH v1 00/15] Maintenance updates for Protonic Holland boards

This patchset consists of several updates that address issues on
Protonic Holland's supported i.MX6-based devices, with a particular
focus on the USB subsystem configuration, thermal zones, and the naming
of GPIO keys. Some of these changes include the activation of USB over-
current detection on certain ports, the disabling of unused USB PHY
nodes, fixing USB-related warnings, adding trip points to thermal zones
on several devices, and renaming the 'power' key to meet the necessary
conventions.

David Jander (1):
  ARM: dts: imx6dl: prtvt7: Remove touchscreen inversion

Oleksij Rempel (11):
  ARM: dts: imx6dl: lanmcu: Disable unused USB PHY nodes
  ARM: dts: imx6dl: lanmcu: Configure over-current polarity for USB OTG
    node
  ARM: dts: imx6dl: Add trip points to thermal zones on several devices
  ARM: dts: imx6dl: vicut1: Address USB related warnings
  ARM: dts: imx6dl: alti6p: fix different USB related warnings
  ARM: dts: imx6dl: prtmvt: fix different USB related warnings
  ARM: dts: imx6qp: prtwd3: Enable USB over current detection on USB OTG
    port
  ARM: dts: imx6ul: prti6g: fix USB over-current detection on USB OTG
    port
  ARM: dts: imx6dl: plybas: fix USB over-current detection on USB OTG
    port
  ARM: dts: imx6dl: prtrvt, prtvt7, prti6q, prtwd2: fix USB related
    warnings
  ARM: dts: imx6qdl: vicut1: rename power to power-button

Robin van der Gracht (3):
  ARM: dts: imx6qdl: vicut1: The sgtl5000 uses i2s not ac97
  ARM: dts: imx6dl: prtvt7: Adjust default backlight brightness to 65
  ARM: dts: imx6q: prtwd2: Correct iomux configuration for ENET MDIO and
    MDC

 arch/arm/boot/dts/imx6dl-alti6p.dts          | 10 +++++++
 arch/arm/boot/dts/imx6dl-lanmcu.dts          |  9 +++++++
 arch/arm/boot/dts/imx6dl-plybas.dts          |  2 +-
 arch/arm/boot/dts/imx6dl-plym2m.dts          | 24 +++++++++++++++++
 arch/arm/boot/dts/imx6dl-prtmvt.dts          | 11 +++++++-
 arch/arm/boot/dts/imx6dl-prtrvt.dts          |  4 +++
 arch/arm/boot/dts/imx6dl-prtvt7.dts          | 28 +++++++++++++++++---
 arch/arm/boot/dts/imx6dl-victgo.dts          | 24 +++++++++++++++++
 arch/arm/boot/dts/imx6q-prtwd2.dts           |  3 ---
 arch/arm/boot/dts/imx6qdl-prti6q.dtsi        | 11 +++++++-
 arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi |  2 +-
 arch/arm/boot/dts/imx6qdl-vicut1.dtsi        | 19 +++++++++++--
 arch/arm/boot/dts/imx6qp-prtwd3.dts          |  2 +-
 arch/arm/boot/dts/imx6ul-prti6g.dts          |  1 +
 14 files changed, 137 insertions(+), 13 deletions(-)

-- 
2.39.2