lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <7f6ab488-9eef-fb94-b007-839eb1c1f487@huawei.com>
Date:   Tue, 30 May 2023 10:00:44 +0800
From:   Baokun Li <libaokun1@...wei.com>
To:     Jan Kara <jack@...e.cz>
CC:     <linux-ext4@...r.kernel.org>, <tytso@....edu>,
        <adilger.kernel@...ger.ca>, <ritesh.list@...il.com>,
        <linux-kernel@...r.kernel.org>, <jun.nie@...aro.org>,
        <ebiggers@...nel.org>, <yi.zhang@...wei.com>,
        <yangerkun@...wei.com>, <yukuai3@...wei.com>,
        <syzbot+a158d886ca08a3fecca4@...kaller.appspotmail.com>,
        <stable@...r.kernel.org>
Subject: Re: [PATCH] ext4: fix race condition between buffer write and
 page_mkwrite

On 2023/5/29 22:44, Jan Kara wrote:
> On Mon 29-05-23 16:01:48, Baokun Li wrote:
>> Syzbot reported a BUG_ON:
>> ==================================================================
>> EXT4-fs (loop0): mounted filesystem without journal. Quota mode: none.
>> EXT4-fs error (device loop0): ext4_mb_generate_buddy:1098: group 0, block
>>       bitmap and bg descriptor inconsistent: 25 vs 150994969 free clusters
>> ------------[ cut here ]------------
>> kernel BUG at fs/ext4/ext4_jbd2.c:53!
>> invalid opcode: 0000 [#1] PREEMPT SMP KASAN
>> CPU: 1 PID: 494 Comm: syz-executor.0 6.1.0-rc7-syzkaller-ga4412fdd49dc #0
>> RIP: 0010:__ext4_journal_stop+0x1b3/0x1c0
>>   [...]
>> Call Trace:
>>   ext4_write_inline_data_end+0xa39/0xdf0
>>   ext4_da_write_end+0x1e2/0x950
>>   generic_perform_write+0x401/0x5f0
>>   ext4_buffered_write_iter+0x35f/0x640
>>   ext4_file_write_iter+0x198/0x1cd0
>>   vfs_write+0x8b5/0xef0
>>   [...]
>> ==================================================================
>>
>> The above BUG_ON is triggered by the following race:
>>
>>             cpu1                    cpu2
>> ________________________|________________________
>> ksys_write
>>   vfs_write
>>    new_sync_write
>>     ext4_file_write_iter
>>      ext4_buffered_write_iter
>>       generic_perform_write
>>        ext4_da_write_begin
>>                            do_fault
>>                             do_page_mkwrite
>>                              ext4_page_mkwrite
>>                               ext4_convert_inline_data
>>                                ext4_convert_inline_data_nolock
>>                                 ext4_destroy_inline_data_nolock
>>                                  //clear EXT4_STATE_MAY_INLINE_DATA
>>                                 ext4_map_blocks --> return error
>>         ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)
>>         ext4_block_write_begin
>>                                 ext4_restore_inline_data
>>                                  // set EXT4_STATE_MAY_INLINE_DATA
>>        ext4_da_write_end
>>         ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)
>>         ext4_write_inline_data_end
>>          handle=NULL
>>          ext4_journal_stop(handle)
>>           __ext4_journal_stop
>>            ext4_put_nojournal(handle)
>>             ref_cnt = (unsigned long)handle
>>             BUG_ON(ref_cnt == 0)  ---> BUG_ON
>>
>> The root cause of this problem is that the ext4_convert_inline_data() in
>> ext4_page_mkwrite() does not grab i_rwsem, so it may race with
>> ext4_buffered_write_iter() and cause the write_begin() and write_end()
>> functions to be inconsistent and trigger BUG_ON.
>>
>> To solve the above issue, we cannot add inode_lock directly to
>> ext4_page_mkwrite(), because this function is a hot path and frequent calls
>> to inode_lock will cause performance degradation for multi-threaded reads
>> and writes. Hence, we move ext4_convert_inline_data() to ext4_file_mmap(),
>> and only when inline_data is enabled and mmap a file in shared write mode,
>> we hold the lock to convert, which can reduce the impact on performance.
>>
>> Reported-by: Jun Nie <jun.nie@...aro.org>
>> Closes: https://lore.kernel.org/lkml/63903521.5040307@huawei.com/t/
>> Reported-by: syzbot+a158d886ca08a3fecca4@...kaller.appspotmail.com
>> Closes: https://syzkaller.appspot.com/bug?id=899b37f20ce4072bcdfecfe1647b39602e956e36
>> Fixes: 7b4cc9787fe3 ("ext4: evict inline data when writing to memory map")
>> CC: stable@...r.kernel.org # 4.12+
>> Signed-off-by: Baokun Li <libaokun1@...wei.com>
> Thanks for the patch! The problem with i_rwsem in ext4_page_mkwrite() is
> not so much about performance as about lock ordering. In
> ext4_page_mkwrite() we are called with mmap_sem held and so we cannot
> acquire i_rwsem because it ranks about it.

Thank you for your review!

I'm sorry I didn't make myself clear here.

Yes, we can't get i_rwsem after holding mmap_sem at any time, otherwise
ABBA deadlock may occur. The "add inode_lock directly" in my patch
description actually looks like this:
```
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index b98d2d58b900..c9318dc2a613 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -6025,12 +6025,14 @@ vm_fault_t ext4_page_mkwrite(struct vm_fault *vmf)
         sb_start_pagefault(inode->i_sb);
         file_update_time(vma->vm_file);

-       filemap_invalidate_lock_shared(mapping);
-
+       inode_lock(inode);
         err = ext4_convert_inline_data(inode);
+       inode_unlock(inode);
         if (err)
                 goto out_ret;

+       filemap_invalidate_lock_shared(mapping);
+
         /*
          * On data journalling we skip straight to the transaction handle:
          * there's no delalloc; page truncated will be checked later; the
```
Originally, ext4_page_mkwrite could be freely concurrent with write,
but after adding inode_lock as in the above scenario, the two would
compete for inode_lock, thus having a performance impact on the
scenario where ext4_page_mkwrite and write are called at the same
time. The ext4_file_map will definitely be called before calling
ext4_page_mkwrite, and ext4_file_map will be called much less often,
so the logic for locking and performing convert is moved here to
reduce the performance impact.


>> ---
>>   fs/ext4/file.c  | 24 +++++++++++++++++++++++-
>>   fs/ext4/inode.c |  4 ----
>>   2 files changed, 23 insertions(+), 5 deletions(-)
>>
>> diff --git a/fs/ext4/file.c b/fs/ext4/file.c
>> index d101b3b0c7da..7a04376c33f2 100644
>> --- a/fs/ext4/file.c
>> +++ b/fs/ext4/file.c
>> @@ -795,7 +795,8 @@ static const struct vm_operations_struct ext4_file_vm_ops = {
>>   static int ext4_file_mmap(struct file *file, struct vm_area_struct *vma)
>>   {
>>   	struct inode *inode = file->f_mapping->host;
>> -	struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
>> +	struct super_block *sb = inode->i_sb;
>> +	struct ext4_sb_info *sbi = EXT4_SB(sb);
>>   	struct dax_device *dax_dev = sbi->s_daxdev;
>>   
>>   	if (unlikely(ext4_forced_shutdown(sbi)))
>> @@ -808,6 +809,27 @@ static int ext4_file_mmap(struct file *file, struct vm_area_struct *vma)
>>   	if (!daxdev_mapping_supported(vma, dax_dev))
>>   		return -EOPNOTSUPP;
>>   
>> +	/*
>> +	 * Writing via mmap has no logic to handle inline data, so we
>> +	 * need to call ext4_convert_inline_data() to convert the inode
>> +	 * to normal format before doing so, otherwise a BUG_ON will be
>> +	 * triggered in ext4_writepages() due to the
>> +	 * EXT4_STATE_MAY_INLINE_DATA flag. Moreover, we need to grab
>> +	 * i_rwsem during conversion, since clearing and setting the
>> +	 * inline data flag may race with ext4_buffered_write_iter()
>> +	 * to trigger a BUG_ON.
>> +	 */
>> +	if (ext4_has_feature_inline_data(sb) &&
>> +	    vma->vm_flags & VM_SHARED && vma->vm_flags & VM_WRITE) {
> Sadly this does not work because we can mmap(2) the file read-only and then
> use mprotect(2) to make file writeable.

I'm very sorry I didn't take this situation into account.

Thank you for pointing out the problem!

> But we can test for VM_MAYWRITE
> which gets set when mapping can be made writeable (basically anytime when
> the file descriptor itself is writeable).
>
> Otherwise the patch looks good.
>
> 								Honza

Indeed!

I will send a patch V2 with the changes suggested by you.

Thanks again!

-- 
With Best Regards,
Baokun Li
.

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ