| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <965bc277-b31b-e278-a793-90248615c9d6@linaro.org>
Date: Wed, 31 May 2023 16:55:02 +0200
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Bjorn Andersson <andersson@...nel.org>
Cc: Andy Gross <agross@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Marijn Suijten <marijn.suijten@...ainline.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH] arm64: dts: qcom: sm6115: Set up CPU cooling maps
On 18.04.2023 17:51, Bjorn Andersson wrote:
> On Tue, Apr 18, 2023 at 03:01:47PM +0200, Konrad Dybcio wrote:
>>
>>
>> On 18.04.2023 15:02, Bjorn Andersson wrote:
>>> On Tue, Apr 18, 2023 at 01:56:56PM +0200, Konrad Dybcio wrote:
>>>> Set up CPU cooling maps to ensure the thermal framework is aware of
>>>> the connection between the CPUs and the TSENS sensors.
>>>>
>>>> All of the maps refer to all 4 CPUs within a given cluster at a time,
>>>> as that's what can be considered the smallest DVFS target unit - they
>>>> all share the same voltage line and clock source.
>>>>
>>>
>>> Generally software based CPU cooling is considered too slow to cope with
>>> CPU core temperature changes, and the limits hardware working together
>>> with OSM/EPSS will do a better job maintaining appropriate core
>>> temperature levels.
>>>
>>> Is there a reason why this can't be used/relied upon on this platform?
>> I haven't set up LMH yet and the default limits, at least with my dubious
>> meta build, seem to let the board go to 75degC with just 4 cores working..
>>
>> Not sure if there's a voltage droop when I let it go full throttle or
>> something, but pushing it to the limit definitely causes the board to be
>> (even) less stable..
>>
>>>
>>>
>>> PS. Amending this mechanism with software based cooling to keep the
>>> system at a reasonable/lower temperature is a good idea.
>> We don't like burned chips around here!
>>
>
> Limits hardware will help you with that, software based cooling will
> help avoid burning the user.
So, are there any reasons not to take this patch?
Konrad
>
> Regards,
> Bjorn
>
>> Konrad
>>>
>>> Regards,
>>> Bjorn
>>>
>>>> Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
>>>> ---
>>>> arch/arm64/boot/dts/qcom/sm6115.dtsi | 137 +++++++++++++++++++++++++++++++++++
>>>> 1 file changed, 137 insertions(+)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
>>>> index 631ca327e064..36ff913c1a60 100644
>>>> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
>>>> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
>>>> @@ -12,6 +12,7 @@
>>>> #include <dt-bindings/gpio/gpio.h>
>>>> #include <dt-bindings/interrupt-controller/arm-gic.h>
>>>> #include <dt-bindings/power/qcom-rpmpd.h>
>>>> +#include <dt-bindings/thermal/thermal.h>
>>>>
>>>> / {
>>>> interrupt-parent = <&intc>;
>>>> @@ -47,6 +48,8 @@ CPU0: cpu@0 {
>>>> enable-method = "psci";
>>>> next-level-cache = <&L2_0>;
>>>> qcom,freq-domain = <&cpufreq_hw 0>;
>>>> + #cooling-cells = <2>;
>>>> +
>>>> L2_0: l2-cache {
>>>> compatible = "cache";
>>>> cache-level = <2>;
>>>> @@ -63,6 +66,7 @@ CPU1: cpu@1 {
>>>> enable-method = "psci";
>>>> next-level-cache = <&L2_0>;
>>>> qcom,freq-domain = <&cpufreq_hw 0>;
>>>> + #cooling-cells = <2>;
>>>> };
>>>>
>>>> CPU2: cpu@2 {
>>>> @@ -75,6 +79,7 @@ CPU2: cpu@2 {
>>>> enable-method = "psci";
>>>> next-level-cache = <&L2_0>;
>>>> qcom,freq-domain = <&cpufreq_hw 0>;
>>>> + #cooling-cells = <2>;
>>>> };
>>>>
>>>> CPU3: cpu@3 {
>>>> @@ -87,6 +92,7 @@ CPU3: cpu@3 {
>>>> enable-method = "psci";
>>>> next-level-cache = <&L2_0>;
>>>> qcom,freq-domain = <&cpufreq_hw 0>;
>>>> + #cooling-cells = <2>;
>>>> };
>>>>
>>>> CPU4: cpu@100 {
>>>> @@ -99,6 +105,8 @@ CPU4: cpu@100 {
>>>> dynamic-power-coefficient = <282>;
>>>> next-level-cache = <&L2_1>;
>>>> qcom,freq-domain = <&cpufreq_hw 1>;
>>>> + #cooling-cells = <2>;
>>>> +
>>>> L2_1: l2-cache {
>>>> compatible = "cache";
>>>> cache-level = <2>;
>>>> @@ -115,6 +123,7 @@ CPU5: cpu@101 {
>>>> enable-method = "psci";
>>>> next-level-cache = <&L2_1>;
>>>> qcom,freq-domain = <&cpufreq_hw 1>;
>>>> + #cooling-cells = <2>;
>>>> };
>>>>
>>>> CPU6: cpu@102 {
>>>> @@ -127,6 +136,7 @@ CPU6: cpu@102 {
>>>> enable-method = "psci";
>>>> next-level-cache = <&L2_1>;
>>>> qcom,freq-domain = <&cpufreq_hw 1>;
>>>> + #cooling-cells = <2>;
>>>> };
>>>>
>>>> CPU7: cpu@103 {
>>>> @@ -139,6 +149,7 @@ CPU7: cpu@103 {
>>>> enable-method = "psci";
>>>> next-level-cache = <&L2_1>;
>>>> qcom,freq-domain = <&cpufreq_hw 1>;
>>>> + #cooling-cells = <2>;
>>>> };
>>>>
>>>> cpu-map {
>>>> @@ -2471,6 +2482,24 @@ cpu4-thermal {
>>>> polling-delay = <0>;
>>>> thermal-sensors = <&tsens0 6>;
>>>>
>>>> + cooling-maps {
>>>> + map0 {
>>>> + trip = <&cpu4_alert0>;
>>>> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>>>> + };
>>>> +
>>>> + map1 {
>>>> + trip = <&cpu4_alert1>;
>>>> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>>>> + };
>>>> + };
>>>> +
>>>> trips {
>>>> cpu4_alert0: trip-point0 {
>>>> temperature = <90000>;
>>>> @@ -2497,6 +2526,24 @@ cpu5-thermal {
>>>> polling-delay = <0>;
>>>> thermal-sensors = <&tsens0 7>;
>>>>
>>>> + cooling-maps {
>>>> + map0 {
>>>> + trip = <&cpu5_alert0>;
>>>> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>>>> + };
>>>> +
>>>> + map1 {
>>>> + trip = <&cpu5_alert1>;
>>>> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>>>> + };
>>>> + };
>>>> +
>>>> trips {
>>>> cpu5_alert0: trip-point0 {
>>>> temperature = <90000>;
>>>> @@ -2523,6 +2570,24 @@ cpu6-thermal {
>>>> polling-delay = <0>;
>>>> thermal-sensors = <&tsens0 8>;
>>>>
>>>> + cooling-maps {
>>>> + map0 {
>>>> + trip = <&cpu6_alert0>;
>>>> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>>>> + };
>>>> +
>>>> + map1 {
>>>> + trip = <&cpu6_alert1>;
>>>> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>>>> + };
>>>> + };
>>>> +
>>>> trips {
>>>> cpu6_alert0: trip-point0 {
>>>> temperature = <90000>;
>>>> @@ -2549,6 +2614,24 @@ cpu7-thermal {
>>>> polling-delay = <0>;
>>>> thermal-sensors = <&tsens0 9>;
>>>>
>>>> + cooling-maps {
>>>> + map0 {
>>>> + trip = <&cpu7_alert0>;
>>>> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>>>> + };
>>>> +
>>>> + map1 {
>>>> + trip = <&cpu7_alert1>;
>>>> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>>>> + };
>>>> + };
>>>> +
>>>> trips {
>>>> cpu7_alert0: trip-point0 {
>>>> temperature = <90000>;
>>>> @@ -2575,6 +2658,24 @@ cpu45-thermal {
>>>> polling-delay = <0>;
>>>> thermal-sensors = <&tsens0 10>;
>>>>
>>>> + cooling-maps {
>>>> + map0 {
>>>> + trip = <&cpu45_alert0>;
>>>> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>>>> + };
>>>> +
>>>> + map1 {
>>>> + trip = <&cpu45_alert1>;
>>>> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>>>> + };
>>>> + };
>>>> +
>>>> trips {
>>>> cpu45_alert0: trip-point0 {
>>>> temperature = <90000>;
>>>> @@ -2601,6 +2702,24 @@ cpu67-thermal {
>>>> polling-delay = <0>;
>>>> thermal-sensors = <&tsens0 11>;
>>>>
>>>> + cooling-maps {
>>>> + map0 {
>>>> + trip = <&cpu67_alert0>;
>>>> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>>>> + };
>>>> +
>>>> + map1 {
>>>> + trip = <&cpu67_alert1>;
>>>> + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>>>> + };
>>>> + };
>>>> +
>>>> trips {
>>>> cpu67_alert0: trip-point0 {
>>>> temperature = <90000>;
>>>> @@ -2627,6 +2746,24 @@ cpu0123-thermal {
>>>> polling-delay = <0>;
>>>> thermal-sensors = <&tsens0 12>;
>>>>
>>>> + cooling-maps {
>>>> + map0 {
>>>> + trip = <&cpu0123_alert0>;
>>>> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>>>> + };
>>>> +
>>>> + map1 {
>>>> + trip = <&cpu0123_alert1>;
>>>> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>>> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>>>> + };
>>>> + };
>>>> +
>>>> trips {
>>>> cpu0123_alert0: trip-point0 {
>>>> temperature = <90000>;
>>>>
>>>> ---
>>>> base-commit: 4aa1da8d99724f6c0b762b58a71cee7c5e2e109b
>>>> change-id: 20230418-topic-cool_bengal-2f5f3f47269c
>>>>
>>>> Best regards,
>>>> --
>>>> Konrad Dybcio <konrad.dybcio@...aro.org>
>>>>
Powered by blists - more mailing lists