lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZHbtTmEAnzZWbHnJ@linaro.org>
Date:   Wed, 31 May 2023 09:46:38 +0300
From:   Abel Vesa <abel.vesa@...aro.org>
To:     Ulf Hansson <ulf.hansson@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        Manivannan Sadhasivam <mani@...nel.org>,
        Alim Akhtar <alim.akhtar@...sung.com>,
        Avri Altman <avri.altman@....com>,
        Bart Van Assche <bvanassche@....org>,
        Adrian Hunter <adrian.hunter@...el.com>,
        "James E . J . Bottomley" <jejb@...ux.ibm.com>,
        "Martin K . Petersen" <martin.petersen@...cle.com>,
        Herbert Xu <herbert@...dor.apana.org.au>,
        "David S . Miller" <davem@...emloft.net>,
        Eric Biggers <ebiggers@...nel.org>
Cc:     linux-mmc@...r.kernel.org, devicetree@...r.kernel.org,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        linux-arm-msm@...r.kernel.org, linux-crypto@...r.kernel.org,
        linux-scsi@...r.kernel.org
Subject: Re: [PATCH v7 3/3] mmc: sdhci-msm: Switch to the new ICE API

On 23-04-09 00:40:41, Abel Vesa wrote:
> Now that there is a new dedicated ICE driver, drop the sdhci-msm ICE
> implementation and use the new ICE api provided by the Qualcomm soc
> driver ice. The platforms that already have ICE support will use the
> API as library since there will not be a devicetree node, but instead
> they have reg range. In this case, the of_qcom_ice_get will return an
> ICE instance created for the consumer's device. But if there are
> platforms that do not have ice reg in the consumer devicetree node
> and instead provide a dedicated ICE devicetree node, theof_qcom_ice_get
> will look up the device based on qcom,ice property and will get the ICE
> instance registered by the probe function of the ice driver.
> 
> The ICE clock is now handle by the new driver. This is done by enabling
> it on the creation of the ICE instance and then enabling/disabling it on
> SDCC runtime resume/suspend.
> 
> Signed-off-by: Abel Vesa <abel.vesa@...aro.org>
> ---

Hi Ulf,

I think you can now apply this one again.

The renaming of the ice module is part of -next now and it is:
47820d3263a4 ("soc: qcom: Rename ice to qcom_ice to avoid module name conflict")

Thanks,
Abel

> 
> The v6 is here:
> https://lore.kernel.org/all/20230407105029.2274111-6-abel.vesa@linaro.org/
> 
> Changes since v6:
>  * none
> 
> Changes since v5:
>  * Reworded the commit message to add information about what happens
>    with the ICE clock and who handles it.
>  * Added temp ice variable to avoid setting the host ice to any value
>    until a valid one is provided.
>  * Dropped the qcom_scm.h include as it is not used anymore now that we
>    moved that to the new ICE driver
> 
> Changes since v4:
>  * none
> 
> Changes since v3:
>  * added back the checks for and the setting of MMC_CAP2_CRYPTO
>  * added enable/resume/suspend implementation for !CONFIG_MMC_CRYPTO
>  * dropped cfg->crypto_cap_idx argument from qcom_ice_program_key
> 
> Changes since v2:
>  * added the suspend API call for ICE
>  * kept old wrappers over ICE API in
> 
> Changes since v1:
>  * Added a check for supported algorithm and key size
>    and passed the ICE defined values for algorithm and key size
>  * Added call to evict function
> 
>  drivers/mmc/host/Kconfig     |   2 +-
>  drivers/mmc/host/sdhci-msm.c | 223 ++++++++---------------------------
>  2 files changed, 48 insertions(+), 177 deletions(-)
> 
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 4745fe217ade..09f837df5435 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -549,7 +549,7 @@ config MMC_SDHCI_MSM
>  	depends on MMC_SDHCI_PLTFM
>  	select MMC_SDHCI_IO_ACCESSORS
>  	select MMC_CQHCI
> -	select QCOM_SCM if MMC_CRYPTO
> +	select QCOM_INLINE_CRYPTO_ENGINE if MMC_CRYPTO
>  	help
>  	  This selects the Secure Digital Host Controller Interface (SDHCI)
>  	  support present in Qualcomm SOCs. The controller supports
> diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
> index 8ac81d57a3df..98171bf5748c 100644
> --- a/drivers/mmc/host/sdhci-msm.c
> +++ b/drivers/mmc/host/sdhci-msm.c
> @@ -13,12 +13,13 @@
>  #include <linux/pm_opp.h>
>  #include <linux/slab.h>
>  #include <linux/iopoll.h>
> -#include <linux/firmware/qcom/qcom_scm.h>
>  #include <linux/regulator/consumer.h>
>  #include <linux/interconnect.h>
>  #include <linux/pinctrl/consumer.h>
>  #include <linux/reset.h>
>  
> +#include <soc/qcom/ice.h>
> +
>  #include "sdhci-cqhci.h"
>  #include "sdhci-pltfm.h"
>  #include "cqhci.h"
> @@ -258,12 +259,14 @@ struct sdhci_msm_variant_info {
>  struct sdhci_msm_host {
>  	struct platform_device *pdev;
>  	void __iomem *core_mem;	/* MSM SDCC mapped address */
> -	void __iomem *ice_mem;	/* MSM ICE mapped address (if available) */
>  	int pwr_irq;		/* power irq */
>  	struct clk *bus_clk;	/* SDHC bus voter clock */
>  	struct clk *xo_clk;	/* TCXO clk needed for FLL feature of cm_dll*/
> -	/* core, iface, cal, sleep, and ice clocks */
> -	struct clk_bulk_data bulk_clks[5];
> +	/* core, iface, cal and sleep clocks */
> +	struct clk_bulk_data bulk_clks[4];
> +#ifdef CONFIG_MMC_CRYPTO
> +	struct qcom_ice *ice;
> +#endif
>  	unsigned long clk_rate;
>  	struct mmc_host *mmc;
>  	bool use_14lpp_dll_reset;
> @@ -1804,164 +1807,51 @@ static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock)
>  
>  #ifdef CONFIG_MMC_CRYPTO
>  
> -#define AES_256_XTS_KEY_SIZE			64
> -
> -/* QCOM ICE registers */
> -
> -#define QCOM_ICE_REG_VERSION			0x0008
> -
> -#define QCOM_ICE_REG_FUSE_SETTING		0x0010
> -#define QCOM_ICE_FUSE_SETTING_MASK		0x1
> -#define QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK	0x2
> -#define QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK	0x4
> -
> -#define QCOM_ICE_REG_BIST_STATUS		0x0070
> -#define QCOM_ICE_BIST_STATUS_MASK		0xF0000000
> -
> -#define QCOM_ICE_REG_ADVANCED_CONTROL		0x1000
> -
> -#define sdhci_msm_ice_writel(host, val, reg)	\
> -	writel((val), (host)->ice_mem + (reg))
> -#define sdhci_msm_ice_readl(host, reg)	\
> -	readl((host)->ice_mem + (reg))
> -
> -static bool sdhci_msm_ice_supported(struct sdhci_msm_host *msm_host)
> -{
> -	struct device *dev = mmc_dev(msm_host->mmc);
> -	u32 regval = sdhci_msm_ice_readl(msm_host, QCOM_ICE_REG_VERSION);
> -	int major = regval >> 24;
> -	int minor = (regval >> 16) & 0xFF;
> -	int step = regval & 0xFFFF;
> -
> -	/* For now this driver only supports ICE version 3. */
> -	if (major != 3) {
> -		dev_warn(dev, "Unsupported ICE version: v%d.%d.%d\n",
> -			 major, minor, step);
> -		return false;
> -	}
> -
> -	dev_info(dev, "Found QC Inline Crypto Engine (ICE) v%d.%d.%d\n",
> -		 major, minor, step);
> -
> -	/* If fuses are blown, ICE might not work in the standard way. */
> -	regval = sdhci_msm_ice_readl(msm_host, QCOM_ICE_REG_FUSE_SETTING);
> -	if (regval & (QCOM_ICE_FUSE_SETTING_MASK |
> -		      QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK |
> -		      QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK)) {
> -		dev_warn(dev, "Fuses are blown; ICE is unusable!\n");
> -		return false;
> -	}
> -	return true;
> -}
> -
> -static inline struct clk *sdhci_msm_ice_get_clk(struct device *dev)
> -{
> -	return devm_clk_get(dev, "ice");
> -}
> -
>  static int sdhci_msm_ice_init(struct sdhci_msm_host *msm_host,
>  			      struct cqhci_host *cq_host)
>  {
>  	struct mmc_host *mmc = msm_host->mmc;
>  	struct device *dev = mmc_dev(mmc);
> -	struct resource *res;
> +	struct qcom_ice *ice;
>  
>  	if (!(cqhci_readl(cq_host, CQHCI_CAP) & CQHCI_CAP_CS))
>  		return 0;
>  
> -	res = platform_get_resource_byname(msm_host->pdev, IORESOURCE_MEM,
> -					   "ice");
> -	if (!res) {
> -		dev_warn(dev, "ICE registers not found\n");
> -		goto disable;
> -	}
> -
> -	if (!qcom_scm_ice_available()) {
> -		dev_warn(dev, "ICE SCM interface not found\n");
> -		goto disable;
> +	ice = of_qcom_ice_get(dev);
> +	if (ice == ERR_PTR(-EOPNOTSUPP)) {
> +		dev_warn(dev, "Disabling inline encryption support\n");
> +		ice = NULL;
>  	}
>  
> -	msm_host->ice_mem = devm_ioremap_resource(dev, res);
> -	if (IS_ERR(msm_host->ice_mem))
> -		return PTR_ERR(msm_host->ice_mem);
> -
> -	if (!sdhci_msm_ice_supported(msm_host))
> -		goto disable;
> +	if (IS_ERR_OR_NULL(ice))
> +		return PTR_ERR_OR_ZERO(ice);
>  
> +	msm_host->ice = ice;
>  	mmc->caps2 |= MMC_CAP2_CRYPTO;
> -	return 0;
>  
> -disable:
> -	dev_warn(dev, "Disabling inline encryption support\n");
>  	return 0;
>  }
>  
> -static void sdhci_msm_ice_low_power_mode_enable(struct sdhci_msm_host *msm_host)
> -{
> -	u32 regval;
> -
> -	regval = sdhci_msm_ice_readl(msm_host, QCOM_ICE_REG_ADVANCED_CONTROL);
> -	/*
> -	 * Enable low power mode sequence
> -	 * [0]-0, [1]-0, [2]-0, [3]-E, [4]-0, [5]-0, [6]-0, [7]-0
> -	 */
> -	regval |= 0x7000;
> -	sdhci_msm_ice_writel(msm_host, regval, QCOM_ICE_REG_ADVANCED_CONTROL);
> -}
> -
> -static void sdhci_msm_ice_optimization_enable(struct sdhci_msm_host *msm_host)
> +static void sdhci_msm_ice_enable(struct sdhci_msm_host *msm_host)
>  {
> -	u32 regval;
> -
> -	/* ICE Optimizations Enable Sequence */
> -	regval = sdhci_msm_ice_readl(msm_host, QCOM_ICE_REG_ADVANCED_CONTROL);
> -	regval |= 0xD807100;
> -	/* ICE HPG requires delay before writing */
> -	udelay(5);
> -	sdhci_msm_ice_writel(msm_host, regval, QCOM_ICE_REG_ADVANCED_CONTROL);
> -	udelay(5);
> +	if (msm_host->mmc->caps2 & MMC_CAP2_CRYPTO)
> +		qcom_ice_enable(msm_host->ice);
>  }
>  
> -/*
> - * Wait until the ICE BIST (built-in self-test) has completed.
> - *
> - * This may be necessary before ICE can be used.
> - *
> - * Note that we don't really care whether the BIST passed or failed; we really
> - * just want to make sure that it isn't still running.  This is because (a) the
> - * BIST is a FIPS compliance thing that never fails in practice, (b) ICE is
> - * documented to reject crypto requests if the BIST fails, so we needn't do it
> - * in software too, and (c) properly testing storage encryption requires testing
> - * the full storage stack anyway, and not relying on hardware-level self-tests.
> - */
> -static int sdhci_msm_ice_wait_bist_status(struct sdhci_msm_host *msm_host)
> +static __maybe_unused int sdhci_msm_ice_resume(struct sdhci_msm_host *msm_host)
>  {
> -	u32 regval;
> -	int err;
> +	if (msm_host->mmc->caps2 & MMC_CAP2_CRYPTO)
> +		return qcom_ice_resume(msm_host->ice);
>  
> -	err = readl_poll_timeout(msm_host->ice_mem + QCOM_ICE_REG_BIST_STATUS,
> -				 regval, !(regval & QCOM_ICE_BIST_STATUS_MASK),
> -				 50, 5000);
> -	if (err)
> -		dev_err(mmc_dev(msm_host->mmc),
> -			"Timed out waiting for ICE self-test to complete\n");
> -	return err;
> +	return 0;
>  }
>  
> -static void sdhci_msm_ice_enable(struct sdhci_msm_host *msm_host)
> +static __maybe_unused int sdhci_msm_ice_suspend(struct sdhci_msm_host *msm_host)
>  {
> -	if (!(msm_host->mmc->caps2 & MMC_CAP2_CRYPTO))
> -		return;
> -	sdhci_msm_ice_low_power_mode_enable(msm_host);
> -	sdhci_msm_ice_optimization_enable(msm_host);
> -	sdhci_msm_ice_wait_bist_status(msm_host);
> -}
> +	if (msm_host->mmc->caps2 & MMC_CAP2_CRYPTO)
> +		return qcom_ice_suspend(msm_host->ice);
>  
> -static int __maybe_unused sdhci_msm_ice_resume(struct sdhci_msm_host *msm_host)
> -{
> -	if (!(msm_host->mmc->caps2 & MMC_CAP2_CRYPTO))
> -		return 0;
> -	return sdhci_msm_ice_wait_bist_status(msm_host);
> +	return 0;
>  }
>  
>  /*
> @@ -1972,48 +1862,28 @@ static int sdhci_msm_program_key(struct cqhci_host *cq_host,
>  				 const union cqhci_crypto_cfg_entry *cfg,
>  				 int slot)
>  {
> -	struct device *dev = mmc_dev(cq_host->mmc);
> +	struct sdhci_host *host = mmc_priv(cq_host->mmc);
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
>  	union cqhci_crypto_cap_entry cap;
> -	union {
> -		u8 bytes[AES_256_XTS_KEY_SIZE];
> -		u32 words[AES_256_XTS_KEY_SIZE / sizeof(u32)];
> -	} key;
> -	int i;
> -	int err;
> -
> -	if (!(cfg->config_enable & CQHCI_CRYPTO_CONFIGURATION_ENABLE))
> -		return qcom_scm_ice_invalidate_key(slot);
>  
>  	/* Only AES-256-XTS has been tested so far. */
>  	cap = cq_host->crypto_cap_array[cfg->crypto_cap_idx];
>  	if (cap.algorithm_id != CQHCI_CRYPTO_ALG_AES_XTS ||
> -	    cap.key_size != CQHCI_CRYPTO_KEY_SIZE_256) {
> -		dev_err_ratelimited(dev,
> -				    "Unhandled crypto capability; algorithm_id=%d, key_size=%d\n",
> -				    cap.algorithm_id, cap.key_size);
> +		cap.key_size != CQHCI_CRYPTO_KEY_SIZE_256)
>  		return -EINVAL;
> -	}
>  
> -	memcpy(key.bytes, cfg->crypto_key, AES_256_XTS_KEY_SIZE);
> -
> -	/*
> -	 * The SCM call byte-swaps the 32-bit words of the key.  So we have to
> -	 * do the same, in order for the final key be correct.
> -	 */
> -	for (i = 0; i < ARRAY_SIZE(key.words); i++)
> -		__cpu_to_be32s(&key.words[i]);
> -
> -	err = qcom_scm_ice_set_key(slot, key.bytes, AES_256_XTS_KEY_SIZE,
> -				   QCOM_SCM_ICE_CIPHER_AES_256_XTS,
> -				   cfg->data_unit_size);
> -	memzero_explicit(&key, sizeof(key));
> -	return err;
> +	if (cfg->config_enable & CQHCI_CRYPTO_CONFIGURATION_ENABLE)
> +		return qcom_ice_program_key(msm_host->ice,
> +					    QCOM_ICE_CRYPTO_ALG_AES_XTS,
> +					    QCOM_ICE_CRYPTO_KEY_SIZE_256,
> +					    cfg->crypto_key,
> +					    cfg->data_unit_size, slot);
> +	else
> +		return qcom_ice_evict_key(msm_host->ice, slot);
>  }
> +
>  #else /* CONFIG_MMC_CRYPTO */
> -static inline struct clk *sdhci_msm_ice_get_clk(struct device *dev)
> -{
> -	return NULL;
> -}
>  
>  static inline int sdhci_msm_ice_init(struct sdhci_msm_host *msm_host,
>  				     struct cqhci_host *cq_host)
> @@ -2025,11 +1895,17 @@ static inline void sdhci_msm_ice_enable(struct sdhci_msm_host *msm_host)
>  {
>  }
>  
> -static inline int __maybe_unused
> +static inline __maybe_unused int
>  sdhci_msm_ice_resume(struct sdhci_msm_host *msm_host)
>  {
>  	return 0;
>  }
> +
> +static inline __maybe_unused int
> +sdhci_msm_ice_suspend(struct sdhci_msm_host *msm_host)
> +{
> +	return 0;
> +}
>  #endif /* !CONFIG_MMC_CRYPTO */
>  
>  /*****************************************************************************\
> @@ -2630,11 +2506,6 @@ static int sdhci_msm_probe(struct platform_device *pdev)
>  		clk = NULL;
>  	msm_host->bulk_clks[3].clk = clk;
>  
> -	clk = sdhci_msm_ice_get_clk(&pdev->dev);
> -	if (IS_ERR(clk))
> -		clk = NULL;
> -	msm_host->bulk_clks[4].clk = clk;
> -
>  	ret = clk_bulk_prepare_enable(ARRAY_SIZE(msm_host->bulk_clks),
>  				      msm_host->bulk_clks);
>  	if (ret)
> @@ -2827,7 +2698,7 @@ static __maybe_unused int sdhci_msm_runtime_suspend(struct device *dev)
>  	clk_bulk_disable_unprepare(ARRAY_SIZE(msm_host->bulk_clks),
>  				   msm_host->bulk_clks);
>  
> -	return 0;
> +	return sdhci_msm_ice_suspend(msm_host);
>  }
>  
>  static __maybe_unused int sdhci_msm_runtime_resume(struct device *dev)
> -- 
> 2.34.1
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ