| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230531065724.3671795-3-joy.zou@nxp.com>
Date: Wed, 31 May 2023 14:57:23 +0800
From: Joy Zou <joy.zou@....com>
To: ping.bai@....com, lgirdwood@...il.com, broonie@...nel.org,
robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
conor+dt@...nel.org, shawnguo@...nel.org, s.hauer@...gutronix.de
Cc: kernel@...gutronix.de, festevam@...il.com, linux-imx@....com,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v1 2/3] regulator: pca9450: add pca9451a support
Adding support for pmic pca9451a.
This patch support old and new pmic pca9451a. The new pmic trimed BUCK1.
The default value of Toff_Deb is used to distinguish the old and new pmic.
Signed-off-by: Joy Zou <joy.zou@....com>
---
drivers/regulator/pca9450-regulator.c | 262 ++++++++++++++++++++++++--
include/linux/regulator/pca9450.h | 2 +
2 files changed, 252 insertions(+), 12 deletions(-)
diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c
index 91bfb7e026c9..654aa4fbe494 100644
--- a/drivers/regulator/pca9450-regulator.c
+++ b/drivers/regulator/pca9450-regulator.c
@@ -104,7 +104,15 @@ static const struct regulator_ops pca9450_ldo_regulator_ops = {
* 0.60 to 2.1875V (12.5mV step)
*/
static const struct linear_range pca9450_dvs_buck_volts[] = {
- REGULATOR_LINEAR_RANGE(600000, 0x00, 0x7F, 12500),
+ REGULATOR_LINEAR_RANGE(600000, 0x00, 0x7F, 12500),
+};
+
+/*
+ * BUCK1/3
+ * 0.65 to 2.2375V (12.5mV step)
+ */
+static const struct linear_range pca9450_trim_dvs_buck_volts[] = {
+ REGULATOR_LINEAR_RANGE(650000, 0x00, 0x7F, 12500),
};
/*
@@ -663,6 +671,207 @@ static const struct pca9450_regulator_desc pca9450bc_regulators[] = {
},
};
+static const struct pca9450_regulator_desc pca9451a_regulators[] = {
+ {
+ .desc = {
+ .name = "buck1",
+ .of_match = of_match_ptr("BUCK1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = PCA9450_BUCK1,
+ .ops = &pca9450_dvs_buck_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = PCA9450_BUCK1_VOLTAGE_NUM,
+ .linear_ranges = pca9450_dvs_buck_volts,
+ .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts),
+ .vsel_reg = PCA9450_REG_BUCK1OUT_DVS0,
+ .vsel_mask = BUCK1OUT_DVS0_MASK,
+ .enable_reg = PCA9450_REG_BUCK1CTRL,
+ .enable_mask = BUCK1_ENMODE_MASK,
+ .enable_val = BUCK_ENMODE_ONREQ,
+ .ramp_mask = BUCK1_RAMP_MASK,
+ .ramp_delay_table = pca9450_dvs_buck_ramp_table,
+ .n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table),
+ .owner = THIS_MODULE,
+ .of_parse_cb = pca9450_set_dvs_levels,
+ },
+ .dvs = {
+ .run_reg = PCA9450_REG_BUCK1OUT_DVS0,
+ .run_mask = BUCK1OUT_DVS0_MASK,
+ .standby_reg = PCA9450_REG_BUCK1OUT_DVS1,
+ .standby_mask = BUCK1OUT_DVS1_MASK,
+ },
+ },
+ {
+ .desc = {
+ .name = "buck1_trim",
+ .of_match = of_match_ptr("BUCK1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = PCA9450_BUCK1,
+ .ops = &pca9450_dvs_buck_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = PCA9450_BUCK1_VOLTAGE_NUM,
+ .linear_ranges = pca9450_trim_dvs_buck_volts,
+ .n_linear_ranges = ARRAY_SIZE(pca9450_trim_dvs_buck_volts),
+ .vsel_reg = PCA9450_REG_BUCK1OUT_DVS0,
+ .vsel_mask = BUCK1OUT_DVS0_MASK,
+ .enable_reg = PCA9450_REG_BUCK1CTRL,
+ .enable_mask = BUCK1_ENMODE_MASK,
+ .enable_val = BUCK_ENMODE_ONREQ,
+ .ramp_mask = BUCK1_RAMP_MASK,
+ .ramp_delay_table = pca9450_dvs_buck_ramp_table,
+ .n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table),
+ .owner = THIS_MODULE,
+ .of_parse_cb = pca9450_set_dvs_levels,
+ },
+ .dvs = {
+ .run_reg = PCA9450_REG_BUCK1OUT_DVS0,
+ .run_mask = BUCK1OUT_DVS0_MASK,
+ .standby_reg = PCA9450_REG_BUCK1OUT_DVS1,
+ .standby_mask = BUCK1OUT_DVS1_MASK,
+ },
+ },
+ {
+ .desc = {
+ .name = "buck2",
+ .of_match = of_match_ptr("BUCK2"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = PCA9450_BUCK2,
+ .ops = &pca9450_dvs_buck_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = PCA9450_BUCK2_VOLTAGE_NUM,
+ .linear_ranges = pca9450_dvs_buck_volts,
+ .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts),
+ .vsel_reg = PCA9450_REG_BUCK2OUT_DVS0,
+ .vsel_mask = BUCK2OUT_DVS0_MASK,
+ .enable_reg = PCA9450_REG_BUCK2CTRL,
+ .enable_mask = BUCK2_ENMODE_MASK,
+ .enable_val = BUCK_ENMODE_ONREQ_STBYREQ,
+ .ramp_mask = BUCK2_RAMP_MASK,
+ .ramp_delay_table = pca9450_dvs_buck_ramp_table,
+ .n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table),
+ .owner = THIS_MODULE,
+ .of_parse_cb = pca9450_set_dvs_levels,
+ },
+ .dvs = {
+ .run_reg = PCA9450_REG_BUCK2OUT_DVS0,
+ .run_mask = BUCK2OUT_DVS0_MASK,
+ .standby_reg = PCA9450_REG_BUCK2OUT_DVS1,
+ .standby_mask = BUCK2OUT_DVS1_MASK,
+ },
+ },
+ {
+ .desc = {
+ .name = "buck4",
+ .of_match = of_match_ptr("BUCK4"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = PCA9450_BUCK4,
+ .ops = &pca9450_buck_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = PCA9450_BUCK4_VOLTAGE_NUM,
+ .linear_ranges = pca9450_buck_volts,
+ .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts),
+ .vsel_reg = PCA9450_REG_BUCK4OUT,
+ .vsel_mask = BUCK4OUT_MASK,
+ .enable_reg = PCA9450_REG_BUCK4CTRL,
+ .enable_mask = BUCK4_ENMODE_MASK,
+ .enable_val = BUCK_ENMODE_ONREQ,
+ .owner = THIS_MODULE,
+ },
+ },
+ {
+ .desc = {
+ .name = "buck5",
+ .of_match = of_match_ptr("BUCK5"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = PCA9450_BUCK5,
+ .ops = &pca9450_buck_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = PCA9450_BUCK5_VOLTAGE_NUM,
+ .linear_ranges = pca9450_buck_volts,
+ .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts),
+ .vsel_reg = PCA9450_REG_BUCK5OUT,
+ .vsel_mask = BUCK5OUT_MASK,
+ .enable_reg = PCA9450_REG_BUCK5CTRL,
+ .enable_mask = BUCK5_ENMODE_MASK,
+ .enable_val = BUCK_ENMODE_ONREQ,
+ .owner = THIS_MODULE,
+ },
+ },
+ {
+ .desc = {
+ .name = "buck6",
+ .of_match = of_match_ptr("BUCK6"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = PCA9450_BUCK6,
+ .ops = &pca9450_buck_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = PCA9450_BUCK6_VOLTAGE_NUM,
+ .linear_ranges = pca9450_buck_volts,
+ .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts),
+ .vsel_reg = PCA9450_REG_BUCK6OUT,
+ .vsel_mask = BUCK6OUT_MASK,
+ .enable_reg = PCA9450_REG_BUCK6CTRL,
+ .enable_mask = BUCK6_ENMODE_MASK,
+ .enable_val = BUCK_ENMODE_ONREQ,
+ .owner = THIS_MODULE,
+ },
+ },
+ {
+ .desc = {
+ .name = "ldo1",
+ .of_match = of_match_ptr("LDO1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = PCA9450_LDO1,
+ .ops = &pca9450_ldo_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = PCA9450_LDO1_VOLTAGE_NUM,
+ .linear_ranges = pca9450_ldo1_volts,
+ .n_linear_ranges = ARRAY_SIZE(pca9450_ldo1_volts),
+ .vsel_reg = PCA9450_REG_LDO1CTRL,
+ .vsel_mask = LDO1OUT_MASK,
+ .enable_reg = PCA9450_REG_LDO1CTRL,
+ .enable_mask = LDO1_EN_MASK,
+ .owner = THIS_MODULE,
+ },
+ },
+ {
+ .desc = {
+ .name = "ldo4",
+ .of_match = of_match_ptr("LDO4"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = PCA9450_LDO4,
+ .ops = &pca9450_ldo_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = PCA9450_LDO4_VOLTAGE_NUM,
+ .linear_ranges = pca9450_ldo34_volts,
+ .n_linear_ranges = ARRAY_SIZE(pca9450_ldo34_volts),
+ .vsel_reg = PCA9450_REG_LDO4CTRL,
+ .vsel_mask = LDO4OUT_MASK,
+ .enable_reg = PCA9450_REG_LDO4CTRL,
+ .enable_mask = LDO4_EN_MASK,
+ .owner = THIS_MODULE,
+ },
+ },
+ {
+ .desc = {
+ .name = "ldo5",
+ .of_match = of_match_ptr("LDO5"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = PCA9450_LDO5,
+ .ops = &pca9450_ldo_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = PCA9450_LDO5_VOLTAGE_NUM,
+ .linear_ranges = pca9450_ldo5_volts,
+ .n_linear_ranges = ARRAY_SIZE(pca9450_ldo5_volts),
+ .vsel_reg = PCA9450_REG_LDO5CTRL_H,
+ .vsel_mask = LDO5HOUT_MASK,
+ .enable_reg = PCA9450_REG_LDO5CTRL_H,
+ .enable_mask = LDO5H_EN_MASK,
+ .owner = THIS_MODULE,
+ },
+ },
+};
+
static irqreturn_t pca9450_irq_handler(int irq, void *data)
{
struct pca9450 *pca9450 = data;
@@ -708,8 +917,9 @@ static int pca9450_i2c_probe(struct i2c_client *i2c)
const struct pca9450_regulator_desc *regulator_desc;
struct regulator_config config = { };
struct pca9450 *pca9450;
- unsigned int device_id, i;
+ unsigned int device_id, i, val;
unsigned int reset_ctrl;
+ bool pmic_trim = false;
int ret;
if (!i2c->irq) {
@@ -721,6 +931,22 @@ static int pca9450_i2c_probe(struct i2c_client *i2c)
if (!pca9450)
return -ENOMEM;
+ pca9450->regmap = devm_regmap_init_i2c(i2c,
+ &pca9450_regmap_config);
+ if (IS_ERR(pca9450->regmap)) {
+ dev_err(&i2c->dev, "regmap initialization failed\n");
+ return PTR_ERR(pca9450->regmap);
+ }
+
+ ret = regmap_read(pca9450->regmap, PCA9450_REG_PWRCTRL, &val);
+ if (ret) {
+ dev_err(&i2c->dev, "Read device id error\n");
+ return ret;
+ }
+
+ if (val & PCA9450_REG_PWRCTRL_TOFF_DEB)
+ pmic_trim = true;
+
switch (type) {
case PCA9450_TYPE_PCA9450A:
regulator_desc = pca9450a_regulators;
@@ -730,6 +956,10 @@ static int pca9450_i2c_probe(struct i2c_client *i2c)
regulator_desc = pca9450bc_regulators;
pca9450->rcnt = ARRAY_SIZE(pca9450bc_regulators);
break;
+ case PCA9450_TYPE_PCA9451A:
+ regulator_desc = pca9451a_regulators;
+ pca9450->rcnt = ARRAY_SIZE(pca9451a_regulators);
+ break;
default:
dev_err(&i2c->dev, "Unknown device type");
return -EINVAL;
@@ -741,13 +971,6 @@ static int pca9450_i2c_probe(struct i2c_client *i2c)
dev_set_drvdata(&i2c->dev, pca9450);
- pca9450->regmap = devm_regmap_init_i2c(i2c,
- &pca9450_regmap_config);
- if (IS_ERR(pca9450->regmap)) {
- dev_err(&i2c->dev, "regmap initialization failed\n");
- return PTR_ERR(pca9450->regmap);
- }
-
ret = regmap_read(pca9450->regmap, PCA9450_REG_DEV_ID, &device_id);
if (ret) {
dev_err(&i2c->dev, "Read device id error\n");
@@ -756,7 +979,8 @@ static int pca9450_i2c_probe(struct i2c_client *i2c)
/* Check your board and dts for match the right pmic */
if (((device_id >> 4) != 0x1 && type == PCA9450_TYPE_PCA9450A) ||
- ((device_id >> 4) != 0x3 && type == PCA9450_TYPE_PCA9450BC)) {
+ ((device_id >> 4) != 0x3 && type == PCA9450_TYPE_PCA9450BC) ||
+ ((device_id >> 4) != 0x9 && type == PCA9450_TYPE_PCA9451A)) {
dev_err(&i2c->dev, "Device id(%x) mismatched\n",
device_id >> 4);
return -EINVAL;
@@ -767,7 +991,16 @@ static int pca9450_i2c_probe(struct i2c_client *i2c)
struct regulator_dev *rdev;
const struct pca9450_regulator_desc *r;
- r = ®ulator_desc[i];
+ if (type == PCA9450_TYPE_PCA9451A &&
+ !strcmp((®ulator_desc[i])->desc.name, "buck1") && pmic_trim) {
+ r = ®ulator_desc[i + 1];
+ i = i + 1;
+ } else if (type == PCA9450_TYPE_PCA9451A &&
+ !strcmp((®ulator_desc[i])->desc.name, "buck1")) {
+ r = ®ulator_desc[i];
+ i = i + 1;
+ } else
+ r = ®ulator_desc[i];
desc = &r->desc;
config.regmap = pca9450->regmap;
@@ -847,7 +1080,8 @@ static int pca9450_i2c_probe(struct i2c_client *i2c)
}
dev_info(&i2c->dev, "%s probed.\n",
- type == PCA9450_TYPE_PCA9450A ? "pca9450a" : "pca9450bc");
+ type == PCA9450_TYPE_PCA9450A ? "pca9450a" :
+ (type == PCA9450_TYPE_PCA9451A ? "pca9451a" : "pca9450bc"));
return 0;
}
@@ -865,6 +1099,10 @@ static const struct of_device_id pca9450_of_match[] = {
.compatible = "nxp,pca9450c",
.data = (void *)PCA9450_TYPE_PCA9450BC,
},
+ {
+ .compatible = "nxp,pca9451a",
+ .data = (void *)PCA9450_TYPE_PCA9451A,
+ },
{ }
};
MODULE_DEVICE_TABLE(of, pca9450_of_match);
diff --git a/include/linux/regulator/pca9450.h b/include/linux/regulator/pca9450.h
index 3c01c2bf84f5..5dd79f52165a 100644
--- a/include/linux/regulator/pca9450.h
+++ b/include/linux/regulator/pca9450.h
@@ -9,6 +9,7 @@
enum pca9450_chip_type {
PCA9450_TYPE_PCA9450A = 0,
PCA9450_TYPE_PCA9450BC,
+ PCA9450_TYPE_PCA9451A,
PCA9450_TYPE_AMOUNT,
};
@@ -93,6 +94,7 @@ enum {
PCA9450_MAX_REGISTER = 0x2F,
};
+#define PCA9450_REG_PWRCTRL_TOFF_DEB BIT(5)
/* PCA9450 BUCK ENMODE bits */
#define BUCK_ENMODE_OFF 0x00
#define BUCK_ENMODE_ONREQ 0x01
--
2.37.1
Powered by blists - more mailing lists