[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CACGkMEuDWL30J7D8v+xLCvvspRBoz8X7q23FymBVRm9bT1pVUQ@mail.gmail.com>
Date: Wed, 31 May 2023 16:26:38 +0800
From: Jason Wang <jasowang@...hat.com>
To: "Michael S. Tsirkin" <mst@...hat.com>
Cc: xuanzhuo@...ux.alibaba.com,
virtualization@...ts.linux-foundation.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH] virtio_ring: validate used buffer length
On Wed, May 31, 2023 at 3:36 PM Jason Wang <jasowang@...hat.com> wrote:
>
> On Wed, May 31, 2023 at 1:50 PM Michael S. Tsirkin <mst@...hat.com> wrote:
> >
> > On Wed, May 31, 2023 at 09:05:00AM +0800, Jason Wang wrote:
> > > On Mon, May 29, 2023 at 6:03 PM Michael S. Tsirkin <mst@...hat.com> wrote:
> > > >
> > > > On Mon, May 29, 2023 at 09:18:10AM +0800, Jason Wang wrote:
> > > > > On Sun, May 28, 2023 at 3:57 PM Michael S. Tsirkin <mst@...hat.com> wrote:
> > > > > >
> > > > > > On Fri, May 26, 2023 at 02:30:41PM +0800, Jason Wang wrote:
> > > > > > > This patch validate
> > > > > >
> > > > > > validates
> > > > > >
> > > > > > > the used buffer length provided by the device
> > > > > > > before trying to use it.
> > > > > >
> > > > > > before returning it to caller
> > > > > >
> > > > > > > This is done by remembering the in buffer
> > > > > > > length in a dedicated array during virtqueue_add(), then we can fail
> > > > > > > the virtqueue_get_buf() when we find the device is trying to give us a
> > > > > > > used buffer length which is greater than we stored before.
> > > > > >
> > > > > > than what we stored
> > > > > >
> > > > > > >
> > > > > > > This validation is disable
> > > > > >
> > > > > > disabled
> > > > > >
> > > > > > > by default via module parameter to unbreak
> > > > > > > some existing devices since some legacy devices are known to report
> > > > > > > buggy used length.
> > > > > > >
> > > > > > > Signed-off-by: Jason Wang <jasowang@...hat.com>
> > > > > >
> > > > > > First I'm not merging this without more data about
> > > > > > what is known to be broken and what is known to work well
> > > > > > in the commit log. And how exactly do things work if used length
> > > > > > is wrong?
> > > > >
> > > > > Assuming the device is malicious, it would be very hard to answer.
> > > > > Auditing and fuzzing won't cover every case. Instead of trying to seek
> > > > > the answer, we can simply make sure the used in buffer length is
> > > > > validated then we know we're fine or not.
> > > >
> > > > To restate the question, you said above "some legacy devices are known
> > > > to report buggy used length". If they report buggy length then how
> > > > can things work?
> > >
> > > The validation is disabled for legacy device (as stated in the changelog):
> > >
> > > static bool vring_needs_used_validation(const struct virtio_device *vdev)
> > > {
> > > /*
> > > * Several legacy devices are known to produce buggy used
> > > * length. In order to let driver work, we won't validate used
> > > * buffer length in this case.
> > > */
> > > if (!virtio_has_feature(vdev, VIRTIO_F_VERSION_1))
> > > return false;
> > > if (force_used_validation)
> > > return true;
> > > return false;
> > > }
> > >
> > > This seems to be what we've agreed in last version:
> > >
> > > https://lore.kernel.org/all/CANLsYkxfhamUU0bb4j7y6N4_G9odKxLCjXxgXEx4SJ6_Kf+M2Q@mail.gmail.com/T/#m31f3b06f9032beec175c312dfa2532cb08b15c56
> > >
> > > Thanks
> > >
> >
> > I don't get it. You wrote:
> >
> > This validation is disable
> > by default via module parameter to unbreak
> > some existing devices since some legacy devices are known to report
> > buggy used length.
> >
> > which devices?
>
> legacy rpmsg and vsock device (before 49d8c5ffad07) at least.
>
> > why do you need a module parameter?
>
> If we enable it unconditionally for modern devices, it may break some
> buggy moden device (vsock without a fix as an example).
>
> >
> >
> > > >
> > > > > > Second what's wrong with dma_desc_extra that we already maintain?
> > > > > > Third motivation - it's part and parcel of the hardening effort yes?
> > > > >
> > > > > They are different. dma_desc_extra is for a descriptor ring, but this
> > > > > is for a used ring. Technically we can go back to iterate on the
> > > > > descriptor ring for a legal used in buffer length. But it will have
> > > > > worse performance.
> > > >
> > > > I don't really understand. We already iterate when we unmap -
> > > > all that is necessary is to subtract it from used length, if at
> > > > the end of the process it is >0 then we know used length is too
> > > > large.
> > >
> > > Yes, but it is the job that is done in the driver level not the virtio
> > > core.
> >
> > What job?
>
> I meant the driver can do the validation since it has the knowledge of
> the buffer length if it wants.
>
> > unmap is done in detach_buf_split and detach_buf_packed respectively.
> > vring_desc_extra isn't even visible outside drivers/virtio/virtio_ring.c
>
> desc_extra doesn't contain buffer length for the case of indirect
> descriptors. So we need to iterate in the descriptors when it looks
> expensive if we don't need unmap.
>
> Thanks
>
> >
> > For drivers that do unmap at driver level - I guess they can do
> > validation there too.
> >
> > > Validation in virtio core is still necessary since they're
> > > working at different levels and it's hard to force the validation in
> > > all drivers by codes. Last version introduces a
> > > suppress_driver_validation to allow the driver to suppress the core
> > > validation which seems not good, we need a way to force the
> > > virtio_ring code to do validation before.
> >
> > Why do we? If driver validates length virtio_ring does not need to
> > validate.
To be more safe, there's no guarantee that there's no bug in the driver.
> If driver does not use length virtio_ring does not need to
> > validate.
This could be done on top assuming the validation is disabled by
default. But if the administrator wants to have belt and braces we
need to leave an option for them.
Thanks
> core can provide this service for the gazillion non
> > performance critical drivers that just want to keep things simple,
> > but the 4-5 critical ones can do their own validation if they want to.
> >
> > > Or such stuff could be added
> > > on top since the validation is by default anyway.
> > >
> > > Thanks
> >
> >
> >
> > > >
> > > >
> > > > > > I'd like to know the fate of VIRTIO_HARDEN_NOTIFICATION before
> > > > > > we do more hardening. If it's irrevocably broken let's rip it out?
> > > > >
> > > > > So the plan is
> > > > >
> > > > > 1) finish used ring validation (this had been proposed, merged and
> > > > > reverted before notification hardening)
> > > > > 2) do notification hardening on top.
> > > > >
> > > > > So let's leave it as is and I will do a rework after we finalize the
> > > > > used ring validation.
> > > > >
> > > > > Thanks
> > > > >
> > > > > >
> > > > > >
> > > > > > > ---
> > > > > > > Changes since V4:
> > > > > > > - drop the flat for driver to suppress the check
> > > > > > > - validation is disabled by default
> > > > > > > - don't do validation for legacy device
> > > > > > > - rebase and support virtqueue resize
> > > > > > > ---
> > > > > > > drivers/virtio/virtio_ring.c | 75 ++++++++++++++++++++++++++++++++++++
> > > > > > > 1 file changed, 75 insertions(+)
> > > > > > >
> > > > > > > diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
> > > > > > > index 143f380baa1c..5b151605aaf8 100644
> > > > > > > --- a/drivers/virtio/virtio_ring.c
> > > > > > > +++ b/drivers/virtio/virtio_ring.c
> > > > > > > @@ -15,6 +15,9 @@
> > > > > > > #include <linux/spinlock.h>
> > > > > > > #include <xen/xen.h>
> > > > > > >
> > > > > > > +static bool force_used_validation = false;
> > > > > > > +module_param(force_used_validation, bool, 0444);
> > > > > > > +
> > > > > > > #ifdef DEBUG
> > > > > > > /* For development, we want to crash whenever the ring is screwed. */
> > > > > > > #define BAD_RING(_vq, fmt, args...) \
> > > > > > > @@ -105,6 +108,9 @@ struct vring_virtqueue_split {
> > > > > > > struct vring_desc_state_split *desc_state;
> > > > > > > struct vring_desc_extra *desc_extra;
> > > > > > >
> > > > > > > + /* Maximum in buffer length, NULL means no used validation */
> > > > > > > + u32 *buflen;
> > > > > > > +
> > > > > > > /* DMA address and size information */
> > > > > > > dma_addr_t queue_dma_addr;
> > > > > > > size_t queue_size_in_bytes;
> > > > > > > @@ -145,6 +151,9 @@ struct vring_virtqueue_packed {
> > > > > > > struct vring_desc_state_packed *desc_state;
> > > > > > > struct vring_desc_extra *desc_extra;
> > > > > > >
> > > > > > > + /* Maximum in buffer length, NULL means no used validation */
> > > > > > > + u32 *buflen;
> > > > > > > +
> > > > > > > /* DMA address and size information */
> > > > > > > dma_addr_t ring_dma_addr;
> > > > > > > dma_addr_t driver_event_dma_addr;
> > > > > > > @@ -552,6 +561,7 @@ static inline int virtqueue_add_split(struct virtqueue *_vq,
> > > > > > > unsigned int i, n, avail, descs_used, prev, err_idx;
> > > > > > > int head;
> > > > > > > bool indirect;
> > > > > > > + u32 buflen = 0;
> > > > > > >
> > > > > > > START_USE(vq);
> > > > > > >
> > > > > > > @@ -635,6 +645,7 @@ static inline int virtqueue_add_split(struct virtqueue *_vq,
> > > > > > > VRING_DESC_F_NEXT |
> > > > > > > VRING_DESC_F_WRITE,
> > > > > > > indirect);
> > > > > > > + buflen += sg->length;
> > > > > > > }
> > > > > > > }
> > > > > > > /* Last one doesn't continue. */
> > > > > > > @@ -675,6 +686,10 @@ static inline int virtqueue_add_split(struct virtqueue *_vq,
> > > > > > > else
> > > > > > > vq->split.desc_state[head].indir_desc = ctx;
> > > > > > >
> > > > > > > + /* Store in buffer length if necessary */
> > > > > > > + if (vq->split.buflen)
> > > > > > > + vq->split.buflen[head] = buflen;
> > > > > > > +
> > > > > > > /* Put entry in available array (but don't update avail->idx until they
> > > > > > > * do sync). */
> > > > > > > avail = vq->split.avail_idx_shadow & (vq->split.vring.num - 1);
> > > > > > > @@ -861,6 +876,11 @@ static void *virtqueue_get_buf_ctx_split(struct virtqueue *_vq,
> > > > > > > BAD_RING(vq, "id %u is not a head!\n", i);
> > > > > > > return NULL;
> > > > > > > }
> > > > > > > + if (vq->split.buflen && unlikely(*len > vq->split.buflen[i])) {
> > > > > > > + BAD_RING(vq, "used len %d is larger than max in buffer len %u\n",
> > > > > > > + *len, vq->split.buflen[i]);
> > > > > > > + return NULL;
> > > > > > > + }
> > > > > > >
> > > > > > > /* detach_buf_split clears data, so grab it now. */
> > > > > > > ret = vq->split.desc_state[i].data;
> > > > > > > @@ -1085,10 +1105,25 @@ static void vring_free_split(struct vring_virtqueue_split *vring_split,
> > > > > > > vring_split->queue_dma_addr,
> > > > > > > dma_dev);
> > > > > > >
> > > > > > > + kfree(vring_split->buflen);
> > > > > > > kfree(vring_split->desc_state);
> > > > > > > kfree(vring_split->desc_extra);
> > > > > > > }
> > > > > > >
> > > > > > > +static bool vring_needs_used_validation(const struct virtio_device *vdev)
> > > > > > > +{
> > > > > > > + /*
> > > > > > > + * Several legacy devices are known to produce buggy used
> > > > > > > + * length. In order to let driver work, we won't validate used
> > > > > > > + * buffer length in this case.
> > > > > > > + */
> > > > > > > + if (!virtio_has_feature(vdev, VIRTIO_F_VERSION_1))
> > > > > > > + return false;
> > > > > > > + if (force_used_validation)
> > > > > > > + return true;
> > > > > > > + return false;
> > > > > > > +}
> > > > > > > +
> > > > > > > static int vring_alloc_queue_split(struct vring_virtqueue_split *vring_split,
> > > > > > > struct virtio_device *vdev,
> > > > > > > u32 num,
> > > > > > > @@ -1137,7 +1172,19 @@ static int vring_alloc_queue_split(struct vring_virtqueue_split *vring_split,
> > > > > > > vring_split->vring_align = vring_align;
> > > > > > > vring_split->may_reduce_num = may_reduce_num;
> > > > > > >
> > > > > > > + if (vring_needs_used_validation(vdev)) {
> > > > > > > + vring_split->buflen =
> > > > > > > + kmalloc_array(num, sizeof(*vring_split->buflen),
> > > > > > > + GFP_KERNEL);
> > > > > > > + if (!vring_split->buflen)
> > > > > > > + goto err_buflen;
> > > > > > > + }
> > > > > > > +
> > > > > > > return 0;
> > > > > > > +
> > > > > > > +err_buflen:
> > > > > > > + vring_free_split(vring_split, vdev, dma_dev);
> > > > > > > + return -ENOMEM;
> > > > > > > }
> > > > > > >
> > > > > > > static struct virtqueue *vring_create_virtqueue_split(
> > > > > > > @@ -1297,6 +1344,7 @@ static int virtqueue_add_indirect_packed(struct vring_virtqueue *vq,
> > > > > > > unsigned int i, n, err_idx;
> > > > > > > u16 head, id;
> > > > > > > dma_addr_t addr;
> > > > > > > + u32 buflen = 0;
> > > > > > >
> > > > > > > head = vq->packed.next_avail_idx;
> > > > > > > desc = alloc_indirect_packed(total_sg, gfp);
> > > > > > > @@ -1325,6 +1373,8 @@ static int virtqueue_add_indirect_packed(struct vring_virtqueue *vq,
> > > > > > > desc[i].addr = cpu_to_le64(addr);
> > > > > > > desc[i].len = cpu_to_le32(sg->length);
> > > > > > > i++;
> > > > > > > + if (n >= out_sgs)
> > > > > > > + buflen += sg->length;
> > > > > > > }
> > > > > > > }
> > > > > > >
> > > > > > > @@ -1379,6 +1429,10 @@ static int virtqueue_add_indirect_packed(struct vring_virtqueue *vq,
> > > > > > > vq->packed.desc_state[id].last = id;
> > > > > > > vq->packed.desc_state[id].premapped = premapped;
> > > > > > >
> > > > > > > + /* Store in buffer length if necessary */
> > > > > > > + if (vq->packed.buflen)
> > > > > > > + vq->packed.buflen[id] = buflen;
> > > > > > > +
> > > > > > > vq->num_added += 1;
> > > > > > >
> > > > > > > pr_debug("Added buffer head %i to %p\n", head, vq);
> > > > > > > @@ -1416,6 +1470,7 @@ static inline int virtqueue_add_packed(struct virtqueue *_vq,
> > > > > > > __le16 head_flags, flags;
> > > > > > > u16 head, id, prev, curr, avail_used_flags;
> > > > > > > int err;
> > > > > > > + u32 buflen = 0;
> > > > > > >
> > > > > > > START_USE(vq);
> > > > > > >
> > > > > > > @@ -1498,6 +1553,8 @@ static inline int virtqueue_add_packed(struct virtqueue *_vq,
> > > > > > > 1 << VRING_PACKED_DESC_F_AVAIL |
> > > > > > > 1 << VRING_PACKED_DESC_F_USED;
> > > > > > > }
> > > > > > > + if (n >= out_sgs)
> > > > > > > + buflen += sg->length;
> > > > > > > }
> > > > > > > }
> > > > > > >
> > > > > > > @@ -1518,6 +1575,10 @@ static inline int virtqueue_add_packed(struct virtqueue *_vq,
> > > > > > > vq->packed.desc_state[id].last = prev;
> > > > > > > vq->packed.desc_state[id].premapped = premapped;
> > > > > > >
> > > > > > > + /* Store in buffer length if necessary */
> > > > > > > + if (vq->packed.buflen)
> > > > > > > + vq->packed.buflen[id] = buflen;
> > > > > > > +
> > > > > > > /*
> > > > > > > * A driver MUST NOT make the first descriptor in the list
> > > > > > > * available before all subsequent descriptors comprising
> > > > > > > @@ -1718,6 +1779,11 @@ static void *virtqueue_get_buf_ctx_packed(struct virtqueue *_vq,
> > > > > > > BAD_RING(vq, "id %u is not a head!\n", id);
> > > > > > > return NULL;
> > > > > > > }
> > > > > > > + if (vq->packed.buflen && unlikely(*len > vq->packed.buflen[id])) {
> > > > > > > + BAD_RING(vq, "used len %d is larger than max in buffer len %u\n",
> > > > > > > + *len, vq->packed.buflen[id]);
> > > > > > > + return NULL;
> > > > > > > + }
> > > > > > >
> > > > > > > /* detach_buf_packed clears data, so grab it now. */
> > > > > > > ret = vq->packed.desc_state[id].data;
> > > > > > > @@ -1937,6 +2003,7 @@ static void vring_free_packed(struct vring_virtqueue_packed *vring_packed,
> > > > > > > vring_packed->device_event_dma_addr,
> > > > > > > dma_dev);
> > > > > > >
> > > > > > > + kfree(vring_packed->buflen);
> > > > > > > kfree(vring_packed->desc_state);
> > > > > > > kfree(vring_packed->desc_extra);
> > > > > > > }
> > > > > > > @@ -1988,6 +2055,14 @@ static int vring_alloc_queue_packed(struct vring_virtqueue_packed *vring_packed,
> > > > > > >
> > > > > > > vring_packed->vring.num = num;
> > > > > > >
> > > > > > > + if (vring_needs_used_validation(vdev)) {
> > > > > > > + vring_packed->buflen =
> > > > > > > + kmalloc_array(num, sizeof(*vring_packed->buflen),
> > > > > > > + GFP_KERNEL);
> > > > > > > + if (!vring_packed->buflen)
> > > > > > > + goto err;
> > > > > > > + }
> > > > > > > +
> > > > > > > return 0;
> > > > > > >
> > > > > > > err:
> > > > > > > --
> > > > > > > 2.25.1
> > > > > >
> > > >
> >
Powered by blists - more mailing lists