| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230529-rproc-of-rmem-v1-1-5b1e38880aba@gerhold.net>
Date: Wed, 31 May 2023 11:34:54 +0200
From: Stephan Gerhold <stephan@...hold.net>
To: Bjorn Andersson <andersson@...nel.org>
Cc: Andy Gross <agross@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Mathieu Poirier <mathieu.poirier@...aro.org>,
linux-arm-msm@...r.kernel.org, linux-remoteproc@...r.kernel.org,
linux-kernel@...r.kernel.org, Stephan Gerhold <stephan@...hold.net>
Subject: [PATCH] remoteproc: qcom: Use of_reserved_mem_lookup()
Reserved memory can be either looked up using the generic function
of_address_to_resource() or using the special of_reserved_mem_lookup().
The latter has the advantage that it ensures that the referenced memory
region was really reserved and is not e.g. status = "disabled".
of_reserved_mem also supports allocating reserved memory dynamically at
boot time. This works only when using of_reserved_mem_lookup() since
there won't be a fixed address in the device tree.
Switch the code to use of_reserved_mem_lookup(), similar to
qcom_q6v5_wcss.c which is using it already. There is no functional
difference for static reserved memory allocations.
While at it this also adds two missing of_node_put() calls in
qcom_q6v5_pas.c.
Signed-off-by: Stephan Gerhold <stephan@...hold.net>
---
See e.g. [1] for an example of dynamically allocated reserved memory.
(This patch does *not* depend on [1] and is useful without as well...)
NOTE: Changes in qcom_q6v5_adsp.c and qcom_q6v5_pas.c are untested,
I only checked qcom_q6v5_mss.c and qcom_wcnss.c on MSM8916/DB410c.
The code changes are pretty similar for all of those though.
[1]: https://lore.kernel.org/linux-arm-msm/20230510-dt-resv-bottom-up-v1-5-3bf68873dbed@gerhold.net/
---
drivers/remoteproc/qcom_q6v5_adsp.c | 22 ++++++++--------
drivers/remoteproc/qcom_q6v5_mss.c | 35 +++++++++++++++----------
drivers/remoteproc/qcom_q6v5_pas.c | 51 ++++++++++++++++++++-----------------
drivers/remoteproc/qcom_wcnss.c | 24 ++++++++---------
4 files changed, 69 insertions(+), 63 deletions(-)
diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c b/drivers/remoteproc/qcom_q6v5_adsp.c
index 6777a3bd6226..948b3d00a564 100644
--- a/drivers/remoteproc/qcom_q6v5_adsp.c
+++ b/drivers/remoteproc/qcom_q6v5_adsp.c
@@ -14,8 +14,8 @@
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
-#include <linux/of_address.h>
#include <linux/of_device.h>
+#include <linux/of_reserved_mem.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
@@ -637,28 +637,26 @@ static int adsp_init_mmio(struct qcom_adsp *adsp,
static int adsp_alloc_memory_region(struct qcom_adsp *adsp)
{
+ struct reserved_mem *rmem = NULL;
struct device_node *node;
- struct resource r;
- int ret;
node = of_parse_phandle(adsp->dev->of_node, "memory-region", 0);
+ if (node)
+ rmem = of_reserved_mem_lookup(node);
+ of_node_put(node);
+
if (!node) {
- dev_err(adsp->dev, "no memory-region specified\n");
+ dev_err(adsp->dev, "unable to resolve memory-region\n");
return -EINVAL;
}
- ret = of_address_to_resource(node, 0, &r);
- of_node_put(node);
- if (ret)
- return ret;
-
- adsp->mem_phys = adsp->mem_reloc = r.start;
- adsp->mem_size = resource_size(&r);
+ adsp->mem_phys = adsp->mem_reloc = rmem->base;
+ adsp->mem_size = rmem->size;
adsp->mem_region = devm_ioremap_wc(adsp->dev,
adsp->mem_phys, adsp->mem_size);
if (!adsp->mem_region) {
dev_err(adsp->dev, "unable to map memory region: %pa+%zx\n",
- &r.start, adsp->mem_size);
+ &rmem->base, adsp->mem_size);
return -EBUSY;
}
diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index 70bffc9f33f6..af815f3cb2d1 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -15,7 +15,6 @@
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
-#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_reserved_mem.h>
#include <linux/platform_device.h>
@@ -1872,11 +1871,9 @@ static int q6v5_init_reset(struct q6v5 *qproc)
static int q6v5_alloc_memory_region(struct q6v5 *qproc)
{
- struct device_node *child;
struct reserved_mem *rmem;
+ struct device_node *child;
struct device_node *node;
- struct resource r;
- int ret;
/*
* In the absence of mba/mpss sub-child, extract the mba and mpss
@@ -1891,15 +1888,20 @@ static int q6v5_alloc_memory_region(struct q6v5 *qproc)
of_node_put(child);
}
- ret = of_address_to_resource(node, 0, &r);
+ if (!node) {
+ dev_err(qproc->dev, "no mba memory-region specified\n");
+ return -EINVAL;
+ }
+
+ rmem = of_reserved_mem_lookup(node);
of_node_put(node);
- if (ret) {
+ if (!rmem) {
dev_err(qproc->dev, "unable to resolve mba region\n");
- return ret;
+ return -EINVAL;
}
- qproc->mba_phys = r.start;
- qproc->mba_size = resource_size(&r);
+ qproc->mba_phys = rmem->base;
+ qproc->mba_size = rmem->size;
if (!child) {
node = of_parse_phandle(qproc->dev->of_node,
@@ -1910,15 +1912,20 @@ static int q6v5_alloc_memory_region(struct q6v5 *qproc)
of_node_put(child);
}
- ret = of_address_to_resource(node, 0, &r);
+ if (!node) {
+ dev_err(qproc->dev, "no mpss memory-region specified\n");
+ return -EINVAL;
+ }
+
+ rmem = of_reserved_mem_lookup(node);
of_node_put(node);
- if (ret) {
+ if (!rmem) {
dev_err(qproc->dev, "unable to resolve mpss region\n");
- return ret;
+ return -EINVAL;
}
- qproc->mpss_phys = qproc->mpss_reloc = r.start;
- qproc->mpss_size = resource_size(&r);
+ qproc->mpss_phys = qproc->mpss_reloc = rmem->base;
+ qproc->mpss_size = rmem->size;
if (!child) {
node = of_parse_phandle(qproc->dev->of_node, "memory-region", 2);
diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index ca0155f41dac..82f498fa9237 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -13,8 +13,8 @@
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/of_address.h>
#include <linux/of_device.h>
+#include <linux/of_reserved_mem.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
@@ -533,9 +533,8 @@ static void adsp_pds_detach(struct qcom_adsp *adsp, struct device **pds,
static int adsp_alloc_memory_region(struct qcom_adsp *adsp)
{
+ struct reserved_mem *rmem;
struct device_node *node;
- struct resource r;
- int ret;
node = of_parse_phandle(adsp->dev->of_node, "memory-region", 0);
if (!node) {
@@ -543,17 +542,19 @@ static int adsp_alloc_memory_region(struct qcom_adsp *adsp)
return -EINVAL;
}
- ret = of_address_to_resource(node, 0, &r);
+ rmem = of_reserved_mem_lookup(node);
of_node_put(node);
- if (ret)
- return ret;
+ if (!rmem) {
+ dev_err(adsp->dev, "unable to resolve memory-region\n");
+ return -EINVAL;
+ }
- adsp->mem_phys = adsp->mem_reloc = r.start;
- adsp->mem_size = resource_size(&r);
+ adsp->mem_phys = adsp->mem_reloc = rmem->base;
+ adsp->mem_size = rmem->size;
adsp->mem_region = devm_ioremap_wc(adsp->dev, adsp->mem_phys, adsp->mem_size);
if (!adsp->mem_region) {
dev_err(adsp->dev, "unable to map memory region: %pa+%zx\n",
- &r.start, adsp->mem_size);
+ &rmem->base, adsp->mem_size);
return -EBUSY;
}
@@ -566,16 +567,19 @@ static int adsp_alloc_memory_region(struct qcom_adsp *adsp)
return -EINVAL;
}
- ret = of_address_to_resource(node, 0, &r);
- if (ret)
- return ret;
+ rmem = of_reserved_mem_lookup(node);
+ of_node_put(node);
+ if (!rmem) {
+ dev_err(adsp->dev, "unable to resolve dtb memory-region\n");
+ return -EINVAL;
+ }
- adsp->dtb_mem_phys = adsp->dtb_mem_reloc = r.start;
- adsp->dtb_mem_size = resource_size(&r);
+ adsp->dtb_mem_phys = adsp->dtb_mem_reloc = rmem->base;
+ adsp->dtb_mem_size = rmem->size;
adsp->dtb_mem_region = devm_ioremap_wc(adsp->dev, adsp->dtb_mem_phys, adsp->dtb_mem_size);
if (!adsp->dtb_mem_region) {
dev_err(adsp->dev, "unable to map dtb memory region: %pa+%zx\n",
- &r.start, adsp->dtb_mem_size);
+ &rmem->base, adsp->dtb_mem_size);
return -EBUSY;
}
@@ -584,29 +588,28 @@ static int adsp_alloc_memory_region(struct qcom_adsp *adsp)
static int adsp_assign_memory_region(struct qcom_adsp *adsp)
{
+ struct reserved_mem *rmem = NULL;
struct qcom_scm_vmperm perm;
struct device_node *node;
- struct resource r;
int ret;
if (!adsp->region_assign_idx)
return 0;
node = of_parse_phandle(adsp->dev->of_node, "memory-region", adsp->region_assign_idx);
- if (!node) {
- dev_err(adsp->dev, "missing shareable memory-region\n");
+ if (node)
+ rmem = of_reserved_mem_lookup(node);
+ of_node_put(node);
+ if (!rmem) {
+ dev_err(adsp->dev, "unable to resolve shareable memory-region\n");
return -EINVAL;
}
- ret = of_address_to_resource(node, 0, &r);
- if (ret)
- return ret;
-
perm.vmid = QCOM_SCM_VMID_MSS_MSA;
perm.perm = QCOM_SCM_PERM_RW;
- adsp->region_assign_phys = r.start;
- adsp->region_assign_size = resource_size(&r);
+ adsp->region_assign_phys = rmem->base;
+ adsp->region_assign_size = rmem->size;
adsp->region_assign_perms = BIT(QCOM_SCM_VMID_HLOS);
ret = qcom_scm_assign_mem(adsp->region_assign_phys,
diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c
index 1ed0647bc962..334a9c75dad6 100644
--- a/drivers/remoteproc/qcom_wcnss.c
+++ b/drivers/remoteproc/qcom_wcnss.c
@@ -14,8 +14,8 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/io.h>
-#include <linux/of_address.h>
#include <linux/of_device.h>
+#include <linux/of_reserved_mem.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
@@ -506,27 +506,25 @@ static int wcnss_request_irq(struct qcom_wcnss *wcnss,
static int wcnss_alloc_memory_region(struct qcom_wcnss *wcnss)
{
+ struct reserved_mem *rmem = NULL;
struct device_node *node;
- struct resource r;
- int ret;
node = of_parse_phandle(wcnss->dev->of_node, "memory-region", 0);
- if (!node) {
- dev_err(wcnss->dev, "no memory-region specified\n");
+ if (node)
+ rmem = of_reserved_mem_lookup(node);
+ of_node_put(node);
+
+ if (!rmem) {
+ dev_err(wcnss->dev, "unable to resolve memory-region\n");
return -EINVAL;
}
- ret = of_address_to_resource(node, 0, &r);
- of_node_put(node);
- if (ret)
- return ret;
-
- wcnss->mem_phys = wcnss->mem_reloc = r.start;
- wcnss->mem_size = resource_size(&r);
+ wcnss->mem_phys = wcnss->mem_reloc = rmem->base;
+ wcnss->mem_size = rmem->size;
wcnss->mem_region = devm_ioremap_wc(wcnss->dev, wcnss->mem_phys, wcnss->mem_size);
if (!wcnss->mem_region) {
dev_err(wcnss->dev, "unable to map memory region: %pa+%zx\n",
- &r.start, wcnss->mem_size);
+ &rmem->base, wcnss->mem_size);
return -EBUSY;
}
---
base-commit: 1ca04f21b204e99dd704146231adfb79ea2fb366
change-id: 20230529-rproc-of-rmem-7d931f61f64e
Best regards,
--
Stephan Gerhold <stephan@...hold.net>
Powered by blists - more mailing lists