| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230531095721.392664-4-victorshihgli@gmail.com>
Date: Wed, 31 May 2023 17:57:21 +0800
From: Victor Shih <victorshihgli@...il.com>
To: ulf.hansson@...aro.org, adrian.hunter@...el.com
Cc: linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org,
benchuanggli@...il.com, HL.Liu@...esyslogic.com.tw,
Greg.tu@...esyslogic.com.tw, Victor Shih <victorshihgli@...il.com>,
Ben Chuang <ben.chuang@...esyslogic.com.tw>,
Victor Shih <victor.shih@...esyslogic.com.tw>
Subject: [PATCH V3 3/3] mmc: sdhci-pci-gli: Add support SD Express card for GL9767
From: Victor Shih <victor.shih@...esyslogic.com.tw>
Add support SD Express card for GL9767. The workflow of the
SD Express card in GL9767 is as below.
1. GL9767 operates in SD mode and set MMC_CAP2_SD_EXP flag.
2. If card is inserted, Host send CMD8 to ask the capabilities
of the card.
3. If the card has PCIe capability, then init_sd_express()
will be invoked.
4. If the card has been put in write protect state then the
SD features supported by SD mode but not supported by
PCIe mode, therefore GL9767 switch to SD mode.
5. If the card has not been put in write protect state then
GL9767 switch from SD mode to PCIe/NVMe mode and mmc driver
handover control to NVMe driver.
6. If card is removed, GL9767 will return to SD mode.
Signed-off-by: Ben Chuang <ben.chuang@...esyslogic.com.tw>
Signed-off-by: Victor Shih <victor.shih@...esyslogic.com.tw>
---
drivers/mmc/host/sdhci-pci-gli.c | 113 +++++++++++++++++++++++++++++++
1 file changed, 113 insertions(+)
diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
index 392a106cea18..bd5185476d0f 100644
--- a/drivers/mmc/host/sdhci-pci-gli.c
+++ b/drivers/mmc/host/sdhci-pci-gli.c
@@ -164,6 +164,10 @@
#define PCIE_GLI_9767_CFG 0x8A0
#define PCIE_GLI_9767_CFG_LOW_PWR_OFF BIT(12)
+#define PCIE_GLI_9767_COMBO_MUX_CTL 0x8C8
+#define PCIE_GLI_9767_COMBO_MUX_CTL_RST_EN BIT(6)
+#define PCIE_GLI_9767_COMBO_MUX_CTL_WAIT_PERST_EN BIT(10)
+
#define PCIE_GLI_9767_PWR_MACRO_CTL 0x8D0
#define PCIE_GLI_9767_PWR_MACRO_CTL_LOW_VOLTAGE GENMASK(3, 0)
#define PCIE_GLI_9767_PWR_MACRO_CTL_LD0_LOW_OUTPUT_VOLTAGE GENMASK(15, 12)
@@ -181,6 +185,9 @@
#define PCIE_GLI_9767_SCR_CORE_PWR_D3_OFF BIT(21)
#define PCIE_GLI_9767_SCR_CFG_RST_DATA_LINK_DOWN BIT(30)
+#define PCIE_GLI_9767_SDHC_CAP 0x91C
+#define PCIE_GLI_9767_SDHC_CAP_SDEI_RESULT BIT(5)
+
#define PCIE_GLI_9767_SD_PLL_CTL 0x938
#define PCIE_GLI_9767_SD_PLL_CTL_PLL_LDIV GENMASK(9, 0)
#define PCIE_GLI_9767_SD_PLL_CTL_PLL_PDIV GENMASK(15, 12)
@@ -191,6 +198,23 @@
#define PCIE_GLI_9767_SD_PLL_CTL2 0x93C
#define PCIE_GLI_9767_SD_PLL_CTL2_PLLSSC_PPM GENMASK(31, 16)
+#define PCIE_GLI_9767_SD_EXPRESS_CTL 0x940
+#define PCIE_GLI_9767_SD_EXPRESS_CTL_SDEI_EXE BIT(0)
+#define PCIE_GLI_9767_SD_EXPRESS_CTL_SD_EXPRESS_MODE BIT(1)
+
+#define PCIE_GLI_9767_SD_DATA_MULTI_CTL 0x944
+#define PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME GENMASK(23, 16)
+#define PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME_VALUE 0x64
+
+#define PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2 0x950
+#define PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2_SDEI_COMPLETE BIT(0)
+
+#define PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_EN_REG2 0x954
+#define PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_EN_REG2_SDEI_COMPLETE_STATUS_EN BIT(0)
+
+#define PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2 0x958
+#define PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2_SDEI_COMPLETE_SIGNAL_EN BIT(0)
+
#define GLI_MAX_TUNING_LOOP 40
/* Genesys Logic chipset */
@@ -935,6 +959,93 @@ static void sdhci_gl9767_reset(struct sdhci_host *host, u8 mask)
gli_set_9767(host);
}
+static int gl9767_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ struct sdhci_pci_slot *slot = sdhci_priv(host);
+ struct pci_dev *pdev;
+ u32 value;
+ int i;
+
+ pdev = slot->chip->pdev;
+
+ if (mmc->ops->get_ro(mmc)) {
+ mmc->ios.timing &= ~(MMC_TIMING_SD_EXP | MMC_TIMING_SD_EXP_1_2V);
+ return 0;
+ }
+
+ gl9767_vhs_write(pdev);
+
+ pci_read_config_dword(pdev, PCIE_GLI_9767_COMBO_MUX_CTL, &value);
+ value &= ~(PCIE_GLI_9767_COMBO_MUX_CTL_RST_EN | PCIE_GLI_9767_COMBO_MUX_CTL_WAIT_PERST_EN);
+ pci_write_config_dword(pdev, PCIE_GLI_9767_COMBO_MUX_CTL, value);
+
+ pci_read_config_dword(pdev, PCIE_GLI_9767_SD_DATA_MULTI_CTL, &value);
+ value &= ~PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME;
+ value |= FIELD_PREP(PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME,
+ PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME_VALUE);
+ pci_write_config_dword(pdev, PCIE_GLI_9767_SD_DATA_MULTI_CTL, value);
+
+ pci_read_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2, &value);
+ value |= PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2_SDEI_COMPLETE;
+ pci_write_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2, value);
+
+ pci_read_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_EN_REG2, &value);
+ value |= PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_EN_REG2_SDEI_COMPLETE_STATUS_EN;
+ pci_write_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_EN_REG2, value);
+
+ pci_read_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2, &value);
+ value |= PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2_SDEI_COMPLETE_SIGNAL_EN;
+ pci_write_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2, value);
+
+ pci_read_config_dword(pdev, PCIE_GLI_9767_CFG, &value);
+ value |= PCIE_GLI_9767_CFG_LOW_PWR_OFF;
+ pci_write_config_dword(pdev, PCIE_GLI_9767_CFG, value);
+
+ value = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+ value &= ~(SDHCI_CLOCK_CARD_EN | SDHCI_CLOCK_PLL_EN);
+ sdhci_writew(host, value, SDHCI_CLOCK_CONTROL);
+
+ value = sdhci_readb(host, SDHCI_POWER_CONTROL);
+ value |= ((SDHCI_POWER_180 | SDHCI_POWER_ON) << 4);
+ sdhci_writeb(host, value, SDHCI_POWER_CONTROL);
+
+ pci_read_config_dword(pdev, PCIE_GLI_9767_SD_EXPRESS_CTL, &value);
+ value |= PCIE_GLI_9767_SD_EXPRESS_CTL_SDEI_EXE;
+ pci_write_config_dword(pdev, PCIE_GLI_9767_SD_EXPRESS_CTL, value);
+
+ for (i = 0; i < 2; i++) {
+ msleep(10);
+ pci_read_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2, &value);
+ if (value & PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2_SDEI_COMPLETE) {
+ pci_write_config_dword(pdev, PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2,
+ value);
+ break;
+ }
+ }
+
+ pci_read_config_dword(pdev, PCIE_GLI_9767_SDHC_CAP, &value);
+ if (value & PCIE_GLI_9767_SDHC_CAP_SDEI_RESULT) {
+ pci_read_config_dword(pdev, PCIE_GLI_9767_SD_EXPRESS_CTL, &value);
+ value |= PCIE_GLI_9767_SD_EXPRESS_CTL_SD_EXPRESS_MODE;
+ pci_write_config_dword(pdev, PCIE_GLI_9767_SD_EXPRESS_CTL, value);
+ } else {
+ mmc->ios.timing &= ~(MMC_TIMING_SD_EXP | MMC_TIMING_SD_EXP_1_2V);
+
+ value = sdhci_readb(host, SDHCI_POWER_CONTROL);
+ value &= ~((SDHCI_POWER_180 | SDHCI_POWER_ON) << 4);
+ sdhci_writeb(host, value, SDHCI_POWER_CONTROL);
+
+ value = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+ value |= (SDHCI_CLOCK_CARD_EN | SDHCI_CLOCK_PLL_EN);
+ sdhci_writew(host, value, SDHCI_CLOCK_CONTROL);
+ }
+
+ gl9767_vhs_read(pdev);
+
+ return 0;
+}
+
static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot)
{
struct sdhci_host *host = slot->host;
@@ -967,6 +1078,8 @@ static int gli_probe_slot_gl9767(struct sdhci_pci_slot *slot)
gl9767_hw_setting(slot);
gli_pcie_enable_msi(slot);
slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
+ host->mmc->caps2 |= MMC_CAP2_SD_EXP;
+ host->mmc_host_ops.init_sd_express = gl9767_init_sd_express;
sdhci_enable_v4_mode(host);
return 0;
--
2.25.1
Powered by blists - more mailing lists