| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230531111518.396868-2-victorshihgli@gmail.com>
Date: Wed, 31 May 2023 19:15:15 +0800
From: Victor Shih <victorshihgli@...il.com>
To: ulf.hansson@...aro.org, adrian.hunter@...el.com
Cc: linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org,
benchuanggli@...il.com, HL.Liu@...esyslogic.com.tw,
Greg.tu@...esyslogic.com.tw, Victor Shih <victorshihgli@...il.com>,
Ben Chuang <ben.chuang@...esyslogic.com.tw>,
Victor Shih <victor.shih@...esyslogic.com.tw>
Subject: [PATCH V4 1/4] mmc: sdhci-pci-gli: Add Genesys Logic GL9767 support
From: Victor Shih <victor.shih@...esyslogic.com.tw>
Add support for the GL9767 chipset. GL9767 supports
SD3 mode likes UHS-I SDR50, SDR104.
Enable MSI interrupt for GL9767. Some platform do not
support PCI INTx and devices can not work without
interrupt.
Signed-off-by: Ben Chuang <ben.chuang@...esyslogic.com.tw>
Signed-off-by: Victor Shih <victor.shih@...esyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@...el.com>
---
drivers/mmc/host/sdhci-pci-core.c | 1 +
drivers/mmc/host/sdhci-pci-gli.c | 160 ++++++++++++++++++++++++++++++
drivers/mmc/host/sdhci-pci.h | 2 +
3 files changed, 163 insertions(+)
diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index 01975d145200..1c2572c0f012 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -1903,6 +1903,7 @@ static const struct pci_device_id pci_ids[] = {
SDHCI_PCI_DEVICE(GLI, 9750, gl9750),
SDHCI_PCI_DEVICE(GLI, 9755, gl9755),
SDHCI_PCI_DEVICE(GLI, 9763E, gl9763e),
+ SDHCI_PCI_DEVICE(GLI, 9767, gl9767),
SDHCI_PCI_DEVICE_CLASS(AMD, SYSTEM_SDHCI, PCI_CLASS_MASK, amd),
/* Generic SD host controller */
{PCI_DEVICE_CLASS(SYSTEM_SDHCI, PCI_CLASS_MASK)},
diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
index 633a8ee8f8c5..3ed207b89d1a 100644
--- a/drivers/mmc/host/sdhci-pci-gli.c
+++ b/drivers/mmc/host/sdhci-pci-gli.c
@@ -149,6 +149,32 @@
#define PCI_GLI_9755_PM_CTRL 0xFC
#define PCI_GLI_9755_PM_STATE GENMASK(1, 0)
+#define SDHCI_GLI_9767_GM_BURST_SIZE 0x510
+#define SDHCI_GLI_9767_GM_BURST_SIZE_AXI_ALWAYS_SET BIT(8)
+
+#define PCIE_GLI_9767_VHS 0x884
+#define GLI_9767_VHS_REV GENMASK(19, 16)
+#define GLI_9767_VHS_REV_R 0x0
+#define GLI_9767_VHS_REV_M 0x1
+#define GLI_9767_VHS_REV_W 0x2
+
+#define PCIE_GLI_9767_PWR_MACRO_CTL 0x8D0
+#define PCIE_GLI_9767_PWR_MACRO_CTL_LOW_VOLTAGE GENMASK(3, 0)
+#define PCIE_GLI_9767_PWR_MACRO_CTL_LD0_LOW_OUTPUT_VOLTAGE GENMASK(15, 12)
+#define PCIE_GLI_9767_PWR_MACRO_CTL_LD0_LOW_OUTPUT_VOLTAGE_VALUE 0x7
+#define PCIE_GLI_9767_PWR_MACRO_CTL_RCLK_AMPLITUDE_CTL GENMASK(29, 28)
+#define PCIE_GLI_9767_PWR_MACRO_CTL_RCLK_AMPLITUDE_CTL_VALUE 0x3
+
+#define PCIE_GLI_9767_SCR 0x8E0
+#define PCIE_GLI_9767_SCR_AUTO_AXI_W_BURST BIT(6)
+#define PCIE_GLI_9767_SCR_AUTO_AXI_R_BURST BIT(7)
+#define PCIE_GLI_9767_SCR_AXI_REQ BIT(9)
+#define PCIE_GLI_9767_SCR_CARD_DET_PWR_SAVING_EN BIT(10)
+#define PCIE_GLI_9767_SCR_SYSTEM_CLK_SELECT_MODE0 BIT(16)
+#define PCIE_GLI_9767_SCR_SYSTEM_CLK_SELECT_MODE1 BIT(17)
+#define PCIE_GLI_9767_SCR_CORE_PWR_D3_OFF BIT(21)
+#define PCIE_GLI_9767_SCR_CFG_RST_DATA_LINK_DOWN BIT(30)
+
#define GLI_MAX_TUNING_LOOP 40
/* Genesys Logic chipset */
@@ -693,6 +719,89 @@ static void gl9755_hw_setting(struct sdhci_pci_slot *slot)
gl9755_wt_off(pdev);
}
+static inline void gl9767_vhs_read(struct pci_dev *pdev)
+{
+ u32 vhs_enable;
+ u32 vhs_value;
+
+ pci_read_config_dword(pdev, PCIE_GLI_9767_VHS, &vhs_value);
+ vhs_enable = FIELD_GET(GLI_9767_VHS_REV, vhs_value);
+
+ if (vhs_enable == GLI_9767_VHS_REV_R)
+ return;
+
+ vhs_value &= ~GLI_9767_VHS_REV;
+ vhs_value |= FIELD_PREP(GLI_9767_VHS_REV, GLI_9767_VHS_REV_R);
+
+ pci_write_config_dword(pdev, PCIE_GLI_9767_VHS, vhs_value);
+}
+
+static inline void gl9767_vhs_write(struct pci_dev *pdev)
+{
+ u32 vhs_enable;
+ u32 vhs_value;
+
+ pci_read_config_dword(pdev, PCIE_GLI_9767_VHS, &vhs_value);
+ vhs_enable = FIELD_GET(GLI_9767_VHS_REV, vhs_value);
+
+ if (vhs_enable == GLI_9767_VHS_REV_W)
+ return;
+
+ vhs_value &= ~GLI_9767_VHS_REV;
+ vhs_value |= FIELD_PREP(GLI_9767_VHS_REV, GLI_9767_VHS_REV_W);
+
+ pci_write_config_dword(pdev, PCIE_GLI_9767_VHS, vhs_value);
+}
+
+static void gli_set_9767(struct sdhci_host *host)
+{
+ u32 value;
+
+ value = sdhci_readl(host, SDHCI_GLI_9767_GM_BURST_SIZE);
+ value &= ~SDHCI_GLI_9767_GM_BURST_SIZE_AXI_ALWAYS_SET;
+ sdhci_writel(host, value, SDHCI_GLI_9767_GM_BURST_SIZE);
+}
+
+static void gl9767_hw_setting(struct sdhci_pci_slot *slot)
+{
+ struct pci_dev *pdev = slot->chip->pdev;
+ u32 value;
+
+ gl9767_vhs_write(pdev);
+
+ pci_read_config_dword(pdev, PCIE_GLI_9767_PWR_MACRO_CTL, &value);
+ value &= ~(PCIE_GLI_9767_PWR_MACRO_CTL_LOW_VOLTAGE |
+ PCIE_GLI_9767_PWR_MACRO_CTL_LD0_LOW_OUTPUT_VOLTAGE |
+ PCIE_GLI_9767_PWR_MACRO_CTL_RCLK_AMPLITUDE_CTL);
+
+ value |= PCIE_GLI_9767_PWR_MACRO_CTL_LOW_VOLTAGE |
+ FIELD_PREP(PCIE_GLI_9767_PWR_MACRO_CTL_LD0_LOW_OUTPUT_VOLTAGE,
+ PCIE_GLI_9767_PWR_MACRO_CTL_LD0_LOW_OUTPUT_VOLTAGE_VALUE) |
+ FIELD_PREP(PCIE_GLI_9767_PWR_MACRO_CTL_RCLK_AMPLITUDE_CTL,
+ PCIE_GLI_9767_PWR_MACRO_CTL_RCLK_AMPLITUDE_CTL_VALUE);
+ pci_write_config_dword(pdev, PCIE_GLI_9767_PWR_MACRO_CTL, value);
+
+ pci_read_config_dword(pdev, PCIE_GLI_9767_SCR, &value);
+ value &= ~(PCIE_GLI_9767_SCR_SYSTEM_CLK_SELECT_MODE0 |
+ PCIE_GLI_9767_SCR_SYSTEM_CLK_SELECT_MODE1 |
+ PCIE_GLI_9767_SCR_CFG_RST_DATA_LINK_DOWN);
+
+ value |= PCIE_GLI_9767_SCR_AUTO_AXI_W_BURST |
+ PCIE_GLI_9767_SCR_AUTO_AXI_R_BURST |
+ PCIE_GLI_9767_SCR_AXI_REQ |
+ PCIE_GLI_9767_SCR_CARD_DET_PWR_SAVING_EN |
+ PCIE_GLI_9767_SCR_CORE_PWR_D3_OFF;
+ pci_write_config_dword(pdev, PCIE_GLI_9767_SCR, value);
+
+ gl9767_vhs_read(pdev);
+}
+
+static void sdhci_gl9767_reset(struct sdhci_host *host, u8 mask)
+{
+ sdhci_reset(host, mask);
+ gli_set_9767(host);
+}
+
static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot)
{
struct sdhci_host *host = slot->host;
@@ -717,6 +826,19 @@ static int gli_probe_slot_gl9755(struct sdhci_pci_slot *slot)
return 0;
}
+static int gli_probe_slot_gl9767(struct sdhci_pci_slot *slot)
+{
+ struct sdhci_host *host = slot->host;
+
+ gli_set_9767(host);
+ gl9767_hw_setting(slot);
+ gli_pcie_enable_msi(slot);
+ slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
+ sdhci_enable_v4_mode(host);
+
+ return 0;
+}
+
static void sdhci_gli_voltage_switch(struct sdhci_host *host)
{
/*
@@ -740,6 +862,25 @@ static void sdhci_gli_voltage_switch(struct sdhci_host *host)
usleep_range(100000, 110000);
}
+static void sdhci_gl9767_voltage_switch(struct sdhci_host *host)
+{
+ /*
+ * According to Section 3.6.1 signal voltage switch procedure in
+ * SD Host Controller Simplified Spec. 4.20, steps 6~8 are as
+ * follows:
+ * (6) Set 1.8V Signal Enable in the Host Control 2 register.
+ * (7) Wait 5ms. 1.8V voltage regulator shall be stable within this
+ * period.
+ * (8) If 1.8V Signal Enable is cleared by Host Controller, go to
+ * step (12).
+ *
+ * Wait 5ms after set 1.8V signal enable in Host Control 2 register
+ * to ensure 1.8V signal enable bit is set by GL9767.
+ *
+ */
+ usleep_range(5000, 5500);
+}
+
static void sdhci_gl9750_reset(struct sdhci_host *host, u8 mask)
{
sdhci_reset(host, mask);
@@ -1150,3 +1291,22 @@ const struct sdhci_pci_fixes sdhci_gl9763e = {
#endif
.add_host = gl9763e_add_host,
};
+
+static const struct sdhci_ops sdhci_gl9767_ops = {
+ .set_clock = sdhci_set_clock,
+ .enable_dma = sdhci_pci_enable_dma,
+ .set_bus_width = sdhci_set_bus_width,
+ .reset = sdhci_gl9767_reset,
+ .set_uhs_signaling = sdhci_set_uhs_signaling,
+ .voltage_switch = sdhci_gl9767_voltage_switch,
+};
+
+const struct sdhci_pci_fixes sdhci_gl9767 = {
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+ .quirks2 = SDHCI_QUIRK2_BROKEN_DDR50,
+ .probe_slot = gli_probe_slot_gl9767,
+ .ops = &sdhci_gl9767_ops,
+#ifdef CONFIG_PM_SLEEP
+ .resume = sdhci_pci_gli_resume,
+#endif
+};
diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h
index 3661a224fb04..9c8863956381 100644
--- a/drivers/mmc/host/sdhci-pci.h
+++ b/drivers/mmc/host/sdhci-pci.h
@@ -76,6 +76,7 @@
#define PCI_DEVICE_ID_GLI_9755 0x9755
#define PCI_DEVICE_ID_GLI_9750 0x9750
#define PCI_DEVICE_ID_GLI_9763E 0xe763
+#define PCI_DEVICE_ID_GLI_9767 0x9767
/*
* PCI device class and mask
@@ -195,5 +196,6 @@ extern const struct sdhci_pci_fixes sdhci_o2;
extern const struct sdhci_pci_fixes sdhci_gl9750;
extern const struct sdhci_pci_fixes sdhci_gl9755;
extern const struct sdhci_pci_fixes sdhci_gl9763e;
+extern const struct sdhci_pci_fixes sdhci_gl9767;
#endif /* __SDHCI_PCI_H */
--
2.25.1
Powered by blists - more mailing lists