lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230531124953.21007-2-quic_mdalam@quicinc.com>
Date:   Wed, 31 May 2023 18:19:50 +0530
From:   Md Sadre Alam <quic_mdalam@...cinc.com>
To:     mani@...nel.org, miquel.raynal@...tlin.com, richard@....at,
        vigneshr@...com, linux-mtd@...ts.infradead.org,
        linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     quic_srichara@...cinc.com, quic_mdalam@...cinc.com
Subject: [PATCH v3 2/5] mtd: rawnand: qcom: Add support for reset, readid, status exec_op

This change will add exec_ops support for RESET , READ_ID, STATUS
command.

Co-developed-by: Sricharan Ramabadhran <quic_srichara@...cinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@...cinc.com>
Signed-off-by: Md Sadre Alam <quic_mdalam@...cinc.com>
---
Change in [v3]

* Updated q_op->flag in qcom_op_cmd_mapping() with OP_PROGRAM_PAGE
  instead NAND_CMD_PAGEPROG

* Change the if condition check for exec_opwrite into single line check.

* Added error check

* Removed check for NAND_CMD_RESET, NAND_CMD_READID from pre_command.

Change in [v2]

* Missed to post Cover-letter, so posting v2 patch with cover-letter

Change in [v1]

* Added initial support for exec_ops.
   
 drivers/mtd/nand/raw/qcom_nandc.c | 218 +++++++++++++++++++++++++++++-
 1 file changed, 215 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index 6a83cd86a12d..659ba923b68a 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -385,6 +385,9 @@ struct nandc_regs {
  * @reg_read_pos:		marker for data read in reg_read_buf
  *
  * @cmd1/vld:			some fixed controller register values
+ *
+ * @exec_opwrite:		flag to select correct number of code word
+ *				while reading status
  */
 struct qcom_nand_controller {
 	struct device *dev;
@@ -435,6 +438,7 @@ struct qcom_nand_controller {
 	int reg_read_pos;
 
 	u32 cmd1, vld;
+	bool exec_opwrite;
 };
 
 /*
@@ -1542,8 +1546,7 @@ static void pre_command(struct qcom_nand_host *host, int command)
 
 	clear_read_regs(nandc);
 
-	if (command == NAND_CMD_RESET || command == NAND_CMD_READID ||
-	    command == NAND_CMD_PARAM || command == NAND_CMD_ERASE1)
+	if (command == NAND_CMD_PARAM || command == NAND_CMD_ERASE1)
 		clear_bam_transaction(nandc);
 }
 
@@ -2920,6 +2923,8 @@ static int qcom_op_cmd_mapping(struct qcom_nand_controller *nandc, u8 cmd,
 		break;
 	case NAND_CMD_PAGEPROG:
 		ret = OP_PROGRAM_PAGE;
+		q_op->flag = OP_PROGRAM_PAGE;
+		nandc->exec_opwrite = true;
 		break;
 	default:
 		break;
@@ -2982,6 +2987,212 @@ static void qcom_parse_instructions(struct nand_chip *chip,
 	}
 }
 
+static void qcom_delay_ns(unsigned int ns)
+{
+	if (!ns)
+		return;
+
+	if (ns < 10000)
+		ndelay(ns);
+	else
+		udelay(DIV_ROUND_UP(ns, 1000));
+}
+
+static int qcom_wait_rdy_poll(struct nand_chip *chip, unsigned int time_ms)
+{
+	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+	unsigned long start = jiffies + msecs_to_jiffies(time_ms);
+	u32 flash;
+
+	nandc_read_buffer_sync(nandc, true);
+
+	do {
+		flash = le32_to_cpu(nandc->reg_read_buf[0]);
+		if (flash & FS_READY_BSY_N)
+			return 0;
+		cpu_relax();
+	} while (time_after(start, jiffies));
+
+	dev_err(nandc->dev, "Timeout waiting for device to be ready:0x%08x\n", flash);
+
+	return -ETIMEDOUT;
+}
+
+static int qcom_read_status_exec(struct nand_chip *chip,
+				 const struct nand_subop *subop)
+{
+	struct qcom_nand_host *host = to_qcom_nand_host(chip);
+	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+	struct qcom_op q_op;
+	const struct nand_op_instr *instr = NULL;
+	unsigned int op_id = 0;
+	unsigned int len = 0;
+	int ret = 0, num_cw, i;
+	u32 flash_status;
+
+	host->status = NAND_STATUS_READY | NAND_STATUS_WP;
+
+	qcom_parse_instructions(chip, subop, &q_op);
+
+	num_cw = nandc->exec_opwrite ? ecc->steps : 1;
+	nandc->exec_opwrite = false;
+
+	nandc->buf_count = 0;
+	nandc->buf_start = 0;
+	host->use_ecc = false;
+
+	clear_read_regs(nandc);
+	clear_bam_transaction(nandc);
+
+	nandc_set_reg(chip, NAND_FLASH_CMD, q_op.cmd_reg);
+	nandc_set_reg(chip, NAND_EXEC_CMD, 1);
+
+	write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
+	write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
+	read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL);
+
+	ret = submit_descs(nandc);
+	if (ret) {
+		dev_err(nandc->dev, "failure in sbumitting status descriptor\n");
+		free_descs(nandc);
+		goto err_out;
+	}
+	free_descs(nandc);
+
+	nandc_read_buffer_sync(nandc, true);
+
+	for (i = 0; i < num_cw; i++) {
+		flash_status = le32_to_cpu(nandc->reg_read_buf[i]);
+
+	if (flash_status & FS_MPU_ERR)
+		host->status &= ~NAND_STATUS_WP;
+
+	if (flash_status & FS_OP_ERR || (i == (num_cw - 1) &&
+					 (flash_status & FS_DEVICE_STS_ERR)))
+		host->status |= NAND_STATUS_FAIL;
+	}
+
+	flash_status = host->status;
+	instr = q_op.data_instr;
+	op_id = q_op.data_instr_idx;
+	len = nand_subop_get_data_len(subop, op_id);
+	memcpy(instr->ctx.data.buf.in, &flash_status, len);
+
+err_out:
+	return ret;
+}
+
+static int qcom_read_id_type_exec(struct nand_chip *chip, const struct nand_subop *subop)
+{
+	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+	struct qcom_nand_host *host = to_qcom_nand_host(chip);
+	struct qcom_op q_op;
+	const struct nand_op_instr *instr = NULL;
+	unsigned int op_id = 0;
+	unsigned int len = 0;
+	int ret = 0;
+
+	qcom_parse_instructions(chip, subop, &q_op);
+
+	nandc->buf_count = 0;
+	nandc->buf_start = 0;
+	host->use_ecc = false;
+
+	clear_read_regs(nandc);
+	clear_bam_transaction(nandc);
+
+	nandc_set_reg(chip, NAND_FLASH_CMD, q_op.cmd_reg);
+	nandc_set_reg(chip, NAND_ADDR0, q_op.addr1_reg);
+	nandc_set_reg(chip, NAND_ADDR1, q_op.addr2_reg);
+	nandc_set_reg(chip, NAND_FLASH_CHIP_SELECT,
+		      nandc->props->is_bam ? 0 : DM_EN);
+
+	nandc_set_reg(chip, NAND_EXEC_CMD, 1);
+
+	write_reg_dma(nandc, NAND_FLASH_CMD, 4, NAND_BAM_NEXT_SGL);
+	write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
+
+	read_reg_dma(nandc, NAND_READ_ID, 1, NAND_BAM_NEXT_SGL);
+
+	ret = submit_descs(nandc);
+	if (ret) {
+		dev_err(nandc->dev, "failure in sbumitting read id descriptor\n");
+		free_descs(nandc);
+		goto err_out;
+	}
+	free_descs(nandc);
+
+	instr = q_op.data_instr;
+	op_id = q_op.data_instr_idx;
+	len = nand_subop_get_data_len(subop, op_id);
+
+	nandc_read_buffer_sync(nandc, true);
+	memcpy(instr->ctx.data.buf.in, nandc->reg_read_buf, len);
+
+err_out:
+	return ret;
+}
+
+static int qcom_misc_cmd_type_exec(struct nand_chip *chip, const struct nand_subop *subop)
+{
+	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+	struct qcom_nand_host *host = to_qcom_nand_host(chip);
+	struct qcom_op q_op;
+	int ret = 0;
+
+	qcom_parse_instructions(chip, subop, &q_op);
+
+	if (q_op.flag == OP_PROGRAM_PAGE)
+		goto wait_rdy;
+
+	nandc->buf_count = 0;
+	nandc->buf_start = 0;
+	host->use_ecc = false;
+
+	clear_read_regs(nandc);
+	clear_bam_transaction(nandc);
+
+	nandc_set_reg(chip, NAND_FLASH_CMD, q_op.cmd_reg);
+	nandc_set_reg(chip, NAND_EXEC_CMD, 1);
+
+	write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
+	write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
+
+	read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL);
+
+	ret = submit_descs(nandc);
+	if (ret) {
+		dev_err(nandc->dev, "failure in sbumitting misc descriptor\n");
+		free_descs(nandc);
+		goto err_out;
+	}
+	free_descs(nandc);
+
+wait_rdy:
+	qcom_delay_ns(q_op.rdy_delay_ns);
+	ret = qcom_wait_rdy_poll(chip, q_op.rdy_timeout_ms);
+
+err_out:
+	return ret;
+}
+
+static const struct nand_op_parser qcom_op_parser = NAND_OP_PARSER(
+		NAND_OP_PARSER_PATTERN(
+			qcom_misc_cmd_type_exec,
+			NAND_OP_PARSER_PAT_CMD_ELEM(false),
+			NAND_OP_PARSER_PAT_WAITRDY_ELEM(false)),
+		NAND_OP_PARSER_PATTERN(
+			qcom_read_id_type_exec,
+			NAND_OP_PARSER_PAT_CMD_ELEM(false),
+			NAND_OP_PARSER_PAT_ADDR_ELEM(false, MAX_ADDRESS_CYCLE),
+			NAND_OP_PARSER_PAT_DATA_IN_ELEM(false, 8)),
+		NAND_OP_PARSER_PATTERN(
+			qcom_read_status_exec,
+			NAND_OP_PARSER_PAT_CMD_ELEM(false),
+			NAND_OP_PARSER_PAT_DATA_IN_ELEM(false, 1)),
+		);
+
 static int qcom_check_op(struct nand_chip *chip,
 			const struct nand_operation *op)
 {
@@ -3022,7 +3233,8 @@ static int qcom_nand_exec_op(struct nand_chip *chip,
 	if (check_only)
 		return qcom_check_op(chip, op);
 
-	return 0;
+	return nand_op_parser_exec_op(chip, &qcom_op_parser,
+			op, check_only);
 }
 
 static const struct nand_controller_ops qcom_nandc_ops = {
-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ