[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230601183151.1000157-3-nm@ti.com>
Date: Thu, 1 Jun 2023 13:31:44 -0500
From: Nishanth Menon <nm@...com>
To: Conor Dooley <conor+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Tero Kristo <kristo@...nel.org>,
Vignesh Raghavendra <vigneshr@...com>
CC: <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, Nishanth Menon <nm@...com>,
Udit Kumar <u-kumar1@...com>,
Neha Malcom Francis <n-francis@...com>
Subject: [PATCH 2/9] arm64: dts: ti: k3-j721e-sk: Enable wakeup_i2c0 and eeprom
Enable wakeup_i2c and use un-used pinmux. While at it, describe the
board detection eeprom present on the board.
Signed-off-by: Nishanth Menon <nm@...com>
---
arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index c068fa46f60e..b1d7f3dd084b 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -540,6 +540,19 @@ &wkup_uart0 {
pinctrl-0 = <&wkup_uart0_pins_default>;
};
+&wkup_i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wkup_i2c0_pins_default>;
+ clock-frequency = <400000>;
+
+ eeprom@51 {
+ /* AT24C512C-MAHM-T */
+ compatible = "atmel,24c512";
+ reg = <0x51>;
+ };
+};
+
&mcu_uart0 {
status = "okay";
pinctrl-names = "default";
--
2.40.0
Powered by blists - more mailing lists