linux-kernel - [PATCH 8/9] arm64: dts: ti: k3-j721e-common-proc-board: Define aliases at board level

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230601183151.1000157-9-nm@ti.com>
Date:   Thu, 1 Jun 2023 13:31:50 -0500
From:   Nishanth Menon <nm@...com>
To:     Conor Dooley <conor+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Tero Kristo <kristo@...nel.org>,
        Vignesh Raghavendra <vigneshr@...com>
CC:     <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>, Nishanth Menon <nm@...com>,
        Udit Kumar <u-kumar1@...com>,
        Neha Malcom Francis <n-francis@...com>
Subject: [PATCH 8/9] arm64: dts: ti: k3-j721e-common-proc-board: Define aliases at board level

Define the aliases at the board level instead of using generic aliases
at SoC level.

Signed-off-by: Nishanth Menon <nm@...com>
---
 .../arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 25111c86511f..b524a65ab43f 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -17,6 +17,18 @@ / {
 	compatible = "ti,j721e-evm", "ti,j721e";
 	model = "Texas Instruments J721e EVM";
 
+	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+		serial4 = &main_uart2;
+		serial6 = &main_uart4;
+		ethernet0 = &cpsw_port1;
+		mmc0 = &main_sdhci0;
+		mmc1 = &main_sdhci1;
+	};
+
 	chosen {
 		stdout-path = "serial2:115200n8";
 	};
-- 
2.40.0