lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Wed, 31 May 2023 21:31:20 -0700
From:   Jacob Pan <jacob.jun.pan@...ux.intel.com>
To:     LKML <linux-kernel@...r.kernel.org>, iommu@...ts.linux.dev,
        Jason Gunthorpe <jgg@...dia.com>,
        "Lu Baolu" <baolu.lu@...ux.intel.com>,
        Joerg Roedel <joro@...tes.org>,
        "Robin Murphy" <robin.murphy@....com>,
        Jean-Philippe Brucker <jean-philippe@...aro.com>,
        dmaengine@...r.kernel.org, vkoul@...nel.org
Cc:     "Will Deacon" <will@...nel.org>,
        David Woodhouse <dwmw2@...radead.org>,
        Raj Ashok <ashok.raj@...el.com>,
        "Tian, Kevin" <kevin.tian@...el.com>, Yi Liu <yi.l.liu@...el.com>,
        "Yu, Fenghua" <fenghua.yu@...el.com>,
        Dave Jiang <dave.jiang@...el.com>,
        Tony Luck <tony.luck@...el.com>,
        "Zanussi, Tom" <tom.zanussi@...el.com>,
        narayan.ranganathan@...el.com, jacob.jun.pan@...ux.intel.com
Subject: Re: [PATCH v7 1/4] iommu: Generalize PASID 0 for normal DMA w/o
 PASID

Hi Jean,
Just wondering if you have other comments, I have renamed RID_PASID to
NO_PASID according you and Kevin's suggestion.

Seeking a R-B from you other ARM developers.

Thanks,

Jacob

On Tue, 23 May 2023 10:34:48 -0700, Jacob Pan
<jacob.jun.pan@...ux.intel.com> wrote:

> PCIe Process address space ID (PASID) is used to tag DMA traffic, it
> provides finer grained isolation than requester ID (RID).
> 
> For each device/RID, 0 is a special PASID for the normal DMA (no
> PASID). This is universal across all architectures that supports PASID,
> therefore warranted to be reserved globally and declared in the common
> header. Consequently, we can avoid the conflict between different PASID
> use cases in the generic code. e.g. SVA and DMA API with PASIDs.
> 
> This paved away for device drivers to choose global PASID policy while
> continue doing normal DMA.
> 
> Noting that VT-d could support none-zero RID/NO_PASID, but currently not
> used.
> 
> Reviewed-by: Lu Baolu <baolu.lu@...ux.intel.com>
> Signed-off-by: Jacob Pan <jacob.jun.pan@...ux.intel.com>
> ---
> v7:
>    - renamed IOMMU_DEF_RID_PASID to be IOMMU_NO_PASID to be more generic
> v6:
>    - let SMMU code use the common RID_PASID macro
> ---
>  .../iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c   |  2 +-
>  drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c   | 10 ++++----
>  drivers/iommu/intel/iommu.c                   | 24 +++++++++----------
>  drivers/iommu/intel/pasid.c                   |  2 +-
>  drivers/iommu/intel/pasid.h                   |  1 -
>  include/linux/iommu.h                         |  1 +
>  6 files changed, 20 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
> b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c index
> a5a63b1c947e..5e6b39881c04 100644 ---
> a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c +++
> b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c @@ -80,7 +80,7 @@
> arm_smmu_share_asid(struct mm_struct *mm, u16 asid)
>  	 * be some overlap between use of both ASIDs, until we
> invalidate the
>  	 * TLB.
>  	 */
> -	arm_smmu_write_ctx_desc(smmu_domain, 0, cd);
> +	arm_smmu_write_ctx_desc(smmu_domain, IOMMU_NO_PASID, cd);
>  
>  	/* Invalidate TLB entries previously associated with that
> context */ arm_smmu_tlb_inv_asid(smmu, asid);
> diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
> b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c index
> 3fd83fb75722..6d64c8fc923f 100644 ---
> a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c +++
> b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c @@ -1053,7 +1053,7 @@ int
> arm_smmu_write_ctx_desc(struct arm_smmu_domain *smmu_domain, int ssid, /*
>  	 * This function handles the following cases:
>  	 *
> -	 * (1) Install primary CD, for normal DMA traffic (SSID = 0).
> +	 * (1) Install primary CD, for normal DMA traffic (SSID =
> IOMMU_NO_PASID = 0).
>  	 * (2) Install a secondary CD, for SID+SSID traffic.
>  	 * (3) Update ASID of a CD. Atomically write the first 64 bits
> of the
>  	 *     CD, then invalidate the old entry and mappings.
> @@ -1869,7 +1869,7 @@ static void arm_smmu_tlb_inv_context(void *cookie)
>  		cmd.tlbi.vmid	= smmu_domain->s2_cfg.vmid;
>  		arm_smmu_cmdq_issue_cmd_with_sync(smmu, &cmd);
>  	}
> -	arm_smmu_atc_inv_domain(smmu_domain, 0, 0, 0);
> +	arm_smmu_atc_inv_domain(smmu_domain, IOMMU_NO_PASID, 0, 0);
>  }
>  
>  static void __arm_smmu_tlb_inv_range(struct arm_smmu_cmdq_ent *cmd,
> @@ -1957,7 +1957,7 @@ static void arm_smmu_tlb_inv_range_domain(unsigned
> long iova, size_t size,
>  	 * Unfortunately, this can't be leaf-only since we may have
>  	 * zapped an entire table.
>  	 */
> -	arm_smmu_atc_inv_domain(smmu_domain, 0, iova, size);
> +	arm_smmu_atc_inv_domain(smmu_domain, IOMMU_NO_PASID, iova, size);
>  }
>  
>  void arm_smmu_tlb_inv_range_asid(unsigned long iova, size_t size, int
> asid, @@ -2131,7 +2131,7 @@ static int arm_smmu_domain_finalise_s1(struct
> arm_smmu_domain *smmu_domain,
>  	 * the master has been added to the devices list for this domain.
>  	 * This isn't an issue because the STE hasn't been installed yet.
>  	 */
> -	ret = arm_smmu_write_ctx_desc(smmu_domain, 0, &cfg->cd);
> +	ret = arm_smmu_write_ctx_desc(smmu_domain, IOMMU_NO_PASID,
> &cfg->cd); if (ret)
>  		goto out_free_cd_tables;
>  
> @@ -2317,7 +2317,7 @@ static void arm_smmu_enable_ats(struct
> arm_smmu_master *master) pdev = to_pci_dev(master->dev);
>  
>  	atomic_inc(&smmu_domain->nr_ats_masters);
> -	arm_smmu_atc_inv_domain(smmu_domain, 0, 0, 0);
> +	arm_smmu_atc_inv_domain(smmu_domain, IOMMU_NO_PASID, 0, 0);
>  	if (pci_enable_ats(pdev, stu))
>  		dev_err(master->dev, "Failed to enable ATS (STU %zu)\n",
> stu); }
> diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
> index b871a6afd803..4eba9973f537 100644
> --- a/drivers/iommu/intel/iommu.c
> +++ b/drivers/iommu/intel/iommu.c
> @@ -877,7 +877,7 @@ void dmar_fault_dump_ptes(struct intel_iommu *iommu,
> u16 source_id, }
>  	/* For request-without-pasid, get the pasid from context entry */
>  	if (intel_iommu_sm && pasid == IOMMU_PASID_INVALID)
> -		pasid = PASID_RID2PASID;
> +		pasid = IOMMU_NO_PASID;
>  
>  	dir_index = pasid >> PASID_PDE_SHIFT;
>  	pde = &dir[dir_index];
> @@ -1457,7 +1457,7 @@ static void __iommu_flush_dev_iotlb(struct
> device_domain_info *info, qdep = info->ats_qdep;
>  	qi_flush_dev_iotlb(info->iommu, sid, info->pfsid,
>  			   qdep, addr, mask);
> -	quirk_extra_dev_tlb_flush(info, addr, mask, PASID_RID2PASID,
> qdep);
> +	quirk_extra_dev_tlb_flush(info, addr, mask, IOMMU_NO_PASID,
> qdep); }
>  
>  static void iommu_flush_dev_iotlb(struct dmar_domain *domain,
> @@ -1492,7 +1492,7 @@ static void iommu_flush_iotlb_psi(struct
> intel_iommu *iommu, ih = 1 << 6;
>  
>  	if (domain->use_first_level) {
> -		qi_flush_piotlb(iommu, did, PASID_RID2PASID, addr,
> pages, ih);
> +		qi_flush_piotlb(iommu, did, IOMMU_NO_PASID, addr, pages,
> ih); } else {
>  		unsigned long bitmask = aligned_pages - 1;
>  
> @@ -1562,7 +1562,7 @@ static void intel_flush_iotlb_all(struct
> iommu_domain *domain) u16 did = domain_id_iommu(dmar_domain, iommu);
>  
>  		if (dmar_domain->use_first_level)
> -			qi_flush_piotlb(iommu, did, PASID_RID2PASID, 0,
> -1, 0);
> +			qi_flush_piotlb(iommu, did, IOMMU_NO_PASID, 0,
> -1, 0); else
>  			iommu->flush.flush_iotlb(iommu, did, 0, 0,
>  						 DMA_TLB_DSI_FLUSH);
> @@ -1952,7 +1952,7 @@ static int domain_context_mapping_one(struct
> dmar_domain *domain, context_pdts(pds);
>  
>  		/* Setup the RID_PASID field: */
> -		context_set_sm_rid2pasid(context, PASID_RID2PASID);
> +		context_set_sm_rid2pasid(context, IOMMU_NO_PASID);
>  
>  		/*
>  		 * Setup the Device-TLB enable bit and Page request
> @@ -2432,13 +2432,13 @@ static int dmar_domain_attach_device(struct
> dmar_domain *domain, /* Setup the PASID entry for requests without PASID:
> */ if (hw_pass_through && domain_type_is_si(domain))
>  			ret = intel_pasid_setup_pass_through(iommu,
> domain,
> -					dev, PASID_RID2PASID);
> +					dev, IOMMU_NO_PASID);
>  		else if (domain->use_first_level)
>  			ret = domain_setup_first_level(iommu, domain,
> dev,
> -					PASID_RID2PASID);
> +					IOMMU_NO_PASID);
>  		else
>  			ret = intel_pasid_setup_second_level(iommu,
> domain,
> -					dev, PASID_RID2PASID);
> +					dev, IOMMU_NO_PASID);
>  		if (ret) {
>  			dev_err(dev, "Setup RID2PASID failed\n");
>  			device_block_translation(dev);
> @@ -3975,7 +3975,7 @@ static void dmar_remove_one_dev_info(struct device
> *dev) if (!dev_is_real_dma_subdevice(info->dev)) {
>  		if (dev_is_pci(info->dev) && sm_supported(iommu))
>  			intel_pasid_tear_down_entry(iommu, info->dev,
> -					PASID_RID2PASID, false);
> +					IOMMU_NO_PASID, false);
>  
>  		iommu_disable_pci_caps(info);
>  		domain_context_clear(info);
> @@ -4004,7 +4004,7 @@ static void device_block_translation(struct device
> *dev) if (!dev_is_real_dma_subdevice(dev)) {
>  		if (sm_supported(iommu))
>  			intel_pasid_tear_down_entry(iommu, dev,
> -						    PASID_RID2PASID,
> false);
> +						    IOMMU_NO_PASID,
> false); else
>  			domain_context_clear(info);
>  	}
> @@ -4339,7 +4339,7 @@ static void domain_set_force_snooping(struct
> dmar_domain *domain) 
>  	list_for_each_entry(info, &domain->devices, link)
>  		intel_pasid_setup_page_snoop_control(info->iommu,
> info->dev,
> -						     PASID_RID2PASID);
> +						     IOMMU_NO_PASID);
>  }
>  
>  static bool intel_iommu_enforce_cache_coherency(struct iommu_domain
> *domain) @@ -4994,7 +4994,7 @@ void quirk_extra_dev_tlb_flush(struct
> device_domain_info *info, return;
>  
>  	sid = PCI_DEVID(info->bus, info->devfn);
> -	if (pasid == PASID_RID2PASID) {
> +	if (pasid == IOMMU_NO_PASID) {
>  		qi_flush_dev_iotlb(info->iommu, sid, info->pfsid,
>  				   qdep, address, mask);
>  	} else {
> diff --git a/drivers/iommu/intel/pasid.c b/drivers/iommu/intel/pasid.c
> index c5d479770e12..23dca3bc319d 100644
> --- a/drivers/iommu/intel/pasid.c
> +++ b/drivers/iommu/intel/pasid.c
> @@ -438,7 +438,7 @@ devtlb_invalidation_with_pasid(struct intel_iommu
> *iommu,
>  	 * SVA usage, device could do DMA with multiple PASIDs. It is
> more
>  	 * efficient to flush devTLB specific to the PASID.
>  	 */
> -	if (pasid == PASID_RID2PASID)
> +	if (pasid == IOMMU_NO_PASID)
>  		qi_flush_dev_iotlb(iommu, sid, pfsid, qdep, 0, 64 -
> VTD_PAGE_SHIFT); else
>  		qi_flush_dev_iotlb_pasid(iommu, sid, pfsid, pasid, qdep,
> 0, 64 - VTD_PAGE_SHIFT); diff --git a/drivers/iommu/intel/pasid.h
> b/drivers/iommu/intel/pasid.h index d6b7d21244b1..027d30afaba6 100644
> --- a/drivers/iommu/intel/pasid.h
> +++ b/drivers/iommu/intel/pasid.h
> @@ -10,7 +10,6 @@
>  #ifndef __INTEL_PASID_H
>  #define __INTEL_PASID_H
>  
> -#define PASID_RID2PASID			0x0
>  #define PASID_MIN			0x1
>  #define PASID_MAX			0x100000
>  #define PASID_PTE_MASK			0x3F
> diff --git a/include/linux/iommu.h b/include/linux/iommu.h
> index e8c9a7da1060..c714d659d114 100644
> --- a/include/linux/iommu.h
> +++ b/include/linux/iommu.h
> @@ -190,6 +190,7 @@ enum iommu_dev_features {
>  	IOMMU_DEV_FEAT_IOPF,
>  };
>  
> +#define IOMMU_NO_PASID	(0U) /* Reserved for DMA w/o PASID */
>  #define IOMMU_PASID_INVALID	(-1U)
>  typedef unsigned int ioasid_t;
>  


Thanks,

Jacob

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ