[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <a23dd485-a3d9-e31f-be3e-0ab293fcfc4a@linaro.org>
Date: Thu, 1 Jun 2023 09:05:47 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Chris Packham <chris.packham@...iedtelesis.co.nz>,
miquel.raynal@...tlin.com, richard@....at, vigneshr@...com,
robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
conor+dt@...nel.org, andrew@...n.ch, gregory.clement@...tlin.com,
sebastian.hesselbarth@...il.com, conor@...nel.org
Cc: linux-mtd@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
enachman@...vell.com, Vadym Kochan <vadym.kochan@...ision.eu>
Subject: Re: [PATCH v8 3/3] dt-bindings: mtd: marvell-nand: Convert to YAML DT
scheme
On 01/06/2023 01:49, Chris Packham wrote:
> From: Vadym Kochan <vadym.kochan@...ision.eu>
>
> Switch the DT binding to a YAML schema to enable the DT validation.
>
> The text binding didn't mention it as a requirement but existing usage
> has
>
> compatible = "marvell,armada-8k-nand-controller",
> "marvell,armada370-nand-controller";
>
> so the YAML allows this in addition to the individual compatible values.
>
> There was also an incorrect reference to dma-names being "rxtx" where
> the driver and existing device trees actually use dma-names = "data" so
> this is corrected in the conversion.
>
> Signed-off-by: Vadym Kochan <vadym.kochan@...ision.eu>
> Signed-off-by: Chris Packham <chris.packham@...iedtelesis.co.nz>
> ---
>
> Notes:
> Changes in v8:
> - Mark deprecated compatible values as such
> - Allow "marvell,armada-8k-nand-controller" without
> "marvell,armada370-nand-controller"
> - Make dma-names usage reflect reality
> - Update commit message
>
> Changes in v7:
> - Restore "label" and "partitions" properties (should be picked up via
> nand-controller.yaml but aren't)
What do you mean by "aren't"? They are not needed.
> - Add/restore nand-on-flash-bbt and nand-ecc-mode which aren't covered
> by nand-controller.yaml.
> - Use "unevalautedProperties: false"
> - Corrections for clock-names, dma-names, nand-rb and nand-ecc-strength
> - Add pxa3xx-nand-controller example
>
> Changes in v6:
> - remove properties covered by nand-controller.yaml
> - add example using armada-8k compatible
>
> earlier changes:
>
> v5:
> 1) Get back "label" and "partitions" properties but without
> ref to the "partition.yaml" which was wrongly used.
>
> 2) Add "additionalProperties: false" for nand@ because all possible
> properties are described.
>
> v4:
> 1) Remove "label" and "partitions" properties
>
> 2) Use 2 clocks for A7K/8K platform which is a requirement
>
> v3:
> 1) Remove txt version from the MAINTAINERS list
>
> 2) Use enum for some of compatible strings
>
> 3) Drop:
> #address-cells
> #size-cells:
>
> as they are inherited from the nand-controller.yaml
>
> 4) Add restriction to use 2 clocks for A8K SoC
>
> 5) Dropped description for clock-names and extend it with
> minItems: 1
>
> 6) Drop description for "dmas"
>
> 7) Use "unevalautedProperties: false"
>
> 8) Drop quites from yaml refs.
>
> 9) Use 4-space indentation for the example section
>
> v2:
> 1) Fixed warning by yamllint with incorrect indentation for compatible list
>
> .../bindings/mtd/marvell,nand-controller.yaml | 223 ++++++++++++++++++
> .../devicetree/bindings/mtd/marvell-nand.txt | 126 ----------
> MAINTAINERS | 1 -
> 3 files changed, 223 insertions(+), 127 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml
> delete mode 100644 Documentation/devicetree/bindings/mtd/marvell-nand.txt
>
> diff --git a/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml
> new file mode 100644
> index 000000000000..433feb430555
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml
> @@ -0,0 +1,223 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mtd/marvell,nand-controller.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Marvell NAND Flash Controller (NFC)
> +
> +maintainers:
> + - Miquel Raynal <miquel.raynal@...tlin.com>
> +
> +properties:
> + compatible:
> + oneOf:
> + - items:
> + - const: marvell,armada-8k-nand-controller
> + - const: marvell,armada370-nand-controller
> + - enum:
> + - marvell,armada-8k-nand-controller
> + - marvell,armada370-nand-controller
> + - marvell,pxa3xx-nand-controller
> + - description: legacy bindings
> + deprecated: true
> + enum:
> + - marvell,armada-8k-nand
> + - marvell,armada370-nand
> + - marvell,pxa3xx-nand
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + description:
> + Shall reference the NAND controller clocks, the second one is
> + is only needed for the Armada 7K/8K SoCs
> + minItems: 1
> + maxItems: 2
> +
> + clock-names:
> + minItems: 1
> + items:
> + - const: core
> + - const: reg
> +
> + dmas:
> + maxItems: 1
> +
> + dma-names:
> + items:
> + - const: data
> +
> + marvell,system-controller:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description: Syscon node that handles NAND controller related registers
> +
> +patternProperties:
> + "^nand@[0-3]$":
> + type: object
> + unevaluatedProperties: false
> + properties:
> + reg:
> + minimum: 0
> + maximum: 3
> +
> + nand-rb:
> + minItems: 1
Drop minItems.
> + maxItems: 1
Didn't you have here minimum and maximum? I think I did not ask to
remove them.
> +
> + nand-ecc-step-size:
> + const: 512
> +
> + nand-ecc-strength:
> + enum: [1, 4, 8, 12, 16]
> +
> + nand-on-flash-bbt:
> + $ref: /schemas/types.yaml#/definitions/flag
> +
> + nand-ecc-mode:
> + const: hw
> +
> + label:
> + $ref: /schemas/types.yaml#/definitions/string
Drop label
> +
> + partitions:
> + type: object
Drop partitions.
> +
> + marvell,nand-keep-config:
> + description: |
> + Orders the driver not to take the timings from the core and
> + leaving them completely untouched. Bootloader timings will then
> + be used.
> + $ref: /schemas/types.yaml#/definitions/flag
> +
> + marvell,nand-enable-arbiter:
> + description: |
> + To enable the arbiter, all boards blindly used it,
> + this bit was set by the bootloader for many boards and even if
> + it is marked reserved in several datasheets, it might be needed to set
> + it (otherwise it is harmless).
> + $ref: /schemas/types.yaml#/definitions/flag
> + deprecated: true
> +
> + additionalProperties: false
unevaluatedProperties: false
> +
> + required:
> + - reg
> + - nand-rb
> +
required: block goes here
> +allOf:
> + - $ref: nand-controller.yaml
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: marvell,pxa3xx-nand-controller
> + then:
> + required:
> + - dmas
> + - dma-names
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: marvell,armada-8k-nand-controller
> + then:
> + properties:
> + clocks:
> + minItems: 2
> +
> + clock-names:
> + minItems: 2
> +
> + required:
> + - marvell,system-controller
> +
Best regards,
Krzysztof
Powered by blists - more mailing lists