linux-kernel - [PATCH v2 4/5] arm64: dts: ti: k3-j7200-common-proc-board: remove duplicate main

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230601093744.1565802-5-u-kumar1@ti.com>
Date:   Thu, 1 Jun 2023 15:07:43 +0530
From:   Udit Kumar <u-kumar1@...com>
To:     <nm@...com>, <vigneshr@...com>, <kristo@...nel.org>,
        <robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <conor+dt@...nel.org>, <m-chawdhry@...com>, <n-francis@...com>
CC:     Udit Kumar <u-kumar1@...com>
Subject: [PATCH v2 4/5] arm64: dts: ti: k3-j7200-common-proc-board: remove duplicate main_i2c0 pin mux

main_i2c0 pin mux was duplicated in som and common file.
So removing duplicated node from common file

Signed-off-by: Udit Kumar <u-kumar1@...com>
---
 arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index 02d2e4b36b18..e12d93f56c51 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -106,13 +106,6 @@ J721E_WKUP_IOPAD(0x0030, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
 };
 
 &main_pmx0 {
-	main_i2c0_pins_default: main-i2c0-pins-default {
-		pinctrl-single,pins = <
-			J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */
-			J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */
-		>;
-	};
-
 	main_uart0_pins_default: main_uart0_pins_default {
 		pinctrl-single,pins = <
 			J721E_IOPAD(0xb0, PIN_INPUT, 0) /* (T16) UART0_RXD */
-- 
2.34.1