[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <979f665e-5ca5-afff-17a8-d967fefca6cb@linaro.org>
Date: Thu, 1 Jun 2023 11:42:01 +0200
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Neil Armstrong <neil.armstrong@...aro.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Johan Hovold <johan+linaro@...nel.org>,
Abel Vesa <abel.vesa@...aro.org>
Cc: linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH] phy: qcom: qmp-combo: fix Display Port PHY configuration
for SM8550
On 1.06.2023 11:39, Neil Armstrong wrote:
> The SM8550 PHY also uses a different offset for the CMN_STATUS reg,
> use the right one for the v6 Display Port configuration.
>
> Fixes: 49742e9edab3 ("phy: qcom-qmp-combo: Add support for SM8550")
> Signed-off-by: Neil Armstrong <neil.armstrong@...aro.org>
> ---
Must have been fun to debug..
Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>
Konrad
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> index 33cc99d9c77d..bebce8c591a3 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> @@ -2151,6 +2151,7 @@ static void qmp_v4_configure_dp_tx(struct qmp_combo *qmp)
> static int qmp_v456_configure_dp_phy(struct qmp_combo *qmp,
> unsigned int com_resetm_ctrl_reg,
> unsigned int com_c_ready_status_reg,
> + unsigned int com_cmn_status_reg,
> unsigned int dp_phy_status_reg)
> {
> const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
> @@ -2207,14 +2208,14 @@ static int qmp_v456_configure_dp_phy(struct qmp_combo *qmp,
> 10000))
> return -ETIMEDOUT;
>
> - if (readl_poll_timeout(qmp->dp_serdes + QSERDES_V4_COM_CMN_STATUS,
> + if (readl_poll_timeout(qmp->dp_serdes + com_cmn_status_reg,
> status,
> ((status & BIT(0)) > 0),
> 500,
> 10000))
> return -ETIMEDOUT;
>
> - if (readl_poll_timeout(qmp->dp_serdes + QSERDES_V4_COM_CMN_STATUS,
> + if (readl_poll_timeout(qmp->dp_serdes + com_cmn_status_reg,
> status,
> ((status & BIT(1)) > 0),
> 500,
> @@ -2250,6 +2251,7 @@ static int qmp_v4_configure_dp_phy(struct qmp_combo *qmp)
>
> ret = qmp_v456_configure_dp_phy(qmp, QSERDES_V4_COM_RESETSM_CNTRL,
> QSERDES_V4_COM_C_READY_STATUS,
> + QSERDES_V4_COM_CMN_STATUS,
> QSERDES_V4_DP_PHY_STATUS);
> if (ret < 0)
> return ret;
> @@ -2314,6 +2316,7 @@ static int qmp_v5_configure_dp_phy(struct qmp_combo *qmp)
>
> ret = qmp_v456_configure_dp_phy(qmp, QSERDES_V4_COM_RESETSM_CNTRL,
> QSERDES_V4_COM_C_READY_STATUS,
> + QSERDES_V4_COM_CMN_STATUS,
> QSERDES_V4_DP_PHY_STATUS);
> if (ret < 0)
> return ret;
> @@ -2373,6 +2376,7 @@ static int qmp_v6_configure_dp_phy(struct qmp_combo *qmp)
>
> ret = qmp_v456_configure_dp_phy(qmp, QSERDES_V6_COM_RESETSM_CNTRL,
> QSERDES_V6_COM_C_READY_STATUS,
> + QSERDES_V6_COM_CMN_STATUS,
> QSERDES_V6_DP_PHY_STATUS);
> if (ret < 0)
> return ret;
>
> ---
> base-commit: d4cee89031c80066ec461bb77b5e13a4f37d5fd2
> change-id: 20230601-topic-sm8550-upstream-dp-phy-init-fix-ed90c001592d
>
> Best regards,
Powered by blists - more mailing lists