linux-kernel - Re: [PATCH 3/4] arm64: dts: qcom: sm8350: Add missing interconnect paths to USB HCs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <a19b7ff8-d253-f021-0987-f9ff13cddf93@linaro.org>
Date:   Thu, 1 Jun 2023 14:23:33 +0200
From:   Konrad Dybcio <konrad.dybcio@...aro.org>
To:     Abel Vesa <abel.vesa@...aro.org>, Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>
Cc:     linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 3/4] arm64: dts: qcom: sm8350: Add missing interconnect
 paths to USB HCs



On 1.06.2023 14:00, Abel Vesa wrote:
> The USB HCs nodes are missing the interconnect paths, so add them.
> 
> Signed-off-by: Abel Vesa <abel.vesa@...aro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>

Konrad
>  arch/arm64/boot/dts/qcom/sm8350.dtsi | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> index 2798a5d6e5f7..88ef478cb5cc 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> @@ -2304,6 +2304,10 @@ usb_1: usb@...8800 {
>  
>  			resets = <&gcc GCC_USB30_PRIM_BCR>;
>  
> +			interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
> +					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
> +			interconnect-names = "usb-ddr", "apps-usb";
> +
>  			usb_1_dwc3: usb@...0000 {
>  				compatible = "snps,dwc3";
>  				reg = <0 0x0a600000 0 0xcd00>;
> @@ -2373,6 +2377,10 @@ usb_2: usb@...8800 {
>  
>  			resets = <&gcc GCC_USB30_SEC_BCR>;
>  
> +			interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>,
> +					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
> +			interconnect-names = "usb-ddr", "apps-usb";
> +
>  			usb_2_dwc3: usb@...0000 {
>  				compatible = "snps,dwc3";
>  				reg = <0 0x0a800000 0 0xcd00>;