Message-ID: <cfa7f046-5447-6c3e-4b6e-09e7ebb6809a@roeck-us.net>
Date:   Thu, 1 Jun 2023 06:48:31 -0700
From:   Guenter Roeck <linux@...ck-us.net>
To:     David Ober <dober6023@...il.com>, linux-hwmon@...r.kernel.org
Cc:     linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org,
        jdelvare@...e.com, corbet@....net, dober@...ovo.com
Subject: Re: [PATCH] New module to add NCT6692D watchdog funtionality

On 6/1/23 05:38, David Ober wrote:
> The new module adds in the basic functionality of the NCT6692D
> watchdog driver. This functionality is added to support the
> Lenovo SE30 device
> 
> Signed-off-by: David Ober <dober6023@...il.com>
> ---
>   Documentation/hwmon/nct6692.rst |  30 ++
>   drivers/hwmon/Kconfig           |  10 +
>   drivers/hwmon/Makefile          |   1 +
>   drivers/hwmon/nct6692.c         | 691 ++++++++++++++++++++++++++++++++

Why are you submitting a watchdog driver into the hwmon subsystem ?

Guenter

>   4 files changed, 732 insertions(+)
>   create mode 100644 Documentation/hwmon/nct6692.rst
>   create mode 100644 drivers/hwmon/nct6692.c
> 
> diff --git a/Documentation/hwmon/nct6692.rst b/Documentation/hwmon/nct6692.rst
> new file mode 100644
> index 000000000000..3bb1a4cccc62
> --- /dev/null
> +++ b/Documentation/hwmon/nct6692.rst
> @@ -0,0 +1,30 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +Kernel driver nct6692
> +=====================
> +
> +Supported chips:
> +
> +  * Nuvoton NCT6692D
> +
> +    Prefix: 'nct6692'
> +
> +    Addresses scanned: ISA address retrieved from Super I/O registers
> +
> +    Datasheet: Available from Nuvoton upon request
> +
> +Authors:
> +
> +	David Ober <dober@...ovo.com>
> +
> +Description
> +-----------
> +
> +This driver implements support for the Nuvoton NCT6692D eSIO chip.
> +
> +
> +Usage Note
> +----------
> +
> +Implement the watchdog functionality of the NCT6692D eSIO chip
> +
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 0d3fd47db918..54907f5dbbce 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -1528,6 +1528,16 @@ config SENSORS_NCT6683
>   	  This driver can also be built as a module. If so, the module
>   	  will be called nct6683.
>   
> +config SENSORS_NCT6692
> +	tristate "Nuvoton NCT6692D"
> +	depends on !PPC
> +	help
> +	  If you say yes here you get support for the hardware monitoring
> +	  functionality of the Nuvoton NCT6692D eSIO chip.
> +
> +	  This driver can also be built as a module. If so, the module
> +	  will be called nct6692.
> +
>   config SENSORS_NCT6775_CORE
>   	tristate
>   	select REGMAP
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index 708e612e4ead..d9cd0735dd26 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -159,6 +159,7 @@ obj-$(CONFIG_SENSORS_MLXREG_FAN) += mlxreg-fan.o
>   obj-$(CONFIG_SENSORS_MENF21BMC_HWMON) += menf21bmc_hwmon.o
>   obj-$(CONFIG_SENSORS_MR75203)	+= mr75203.o
>   obj-$(CONFIG_SENSORS_NCT6683)	+= nct6683.o
> +obj-$(CONFIG_SENSORS_NCT6692)	+= nct6692.o
>   obj-$(CONFIG_SENSORS_NCT6775_CORE) += nct6775-core.o
>   nct6775-objs			:= nct6775-platform.o
>   obj-$(CONFIG_SENSORS_NCT6775)	+= nct6775.o
> diff --git a/drivers/hwmon/nct6692.c b/drivers/hwmon/nct6692.c
> new file mode 100644
> index 000000000000..2fd5d51d888c
> --- /dev/null
> +++ b/drivers/hwmon/nct6692.c
> @@ -0,0 +1,691 @@
> The new module adds in the basic functionality of the NCT6692D
> watchdog driver. This functionality is added to support the
> Lenovo SE30 device
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * ThinkEdge Watchdog Driver
> + */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> +#include <linux/acpi.h>
> +#include <linux/module.h>
> +#include <linux/moduleparam.h>
> +#include <linux/platform_device.h>
> +#include <linux/types.h>
> +#include <linux/watchdog.h>
> +#include <linux/ioport.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/pci.h>
> +
> +#include <linux/string.h>
> +
> +/*
> + * ISA constants
> + */
> +
> +#define IOREGION_ALIGNMENT      (~7)
> +#define IOREGION_OFFSET         4       /* Use EC port 1 */
> +#define IOREGION_LENGTH         4
> +
> +#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */
> +#define WATCHDOG_WDT_SEL 1
> +
> +/*The timeout range is 1-255 minutes*/
> +#define MIN_TIMEOUT	     1
> +#define MAX_TIMEOUT	     255
> +
> +#define THINKEDGE_MAX_PARAM_STRING_LEN 16
> +
> +static int timeout; /* in seconds */
> +module_param(timeout, int, 0);
> +MODULE_PARM_DESC(timeout,
> +		 "Watchdog timeout in seconds. 1 <= timeout <= 255, default="
> +		 __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
> +
> +static bool nowayout = WATCHDOG_NOWAYOUT;
> +module_param(nowayout, bool, 0);
> +MODULE_PARM_DESC(nowayout,
> +		 "Watchdog cannot be stopped once started (default="
> +		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> +
> +static int early_disable;
> +module_param(early_disable, int, 0);
> +MODULE_PARM_DESC(early_disable, "Disable watchdog at boot time (default=0)");
> +
> +#define DRVNAME "nct6692"
> +
> +#define NCT6692 "nct6692"
> +#define NCT6692_ID 0x0110
> +
> +#define WDT_EFER(X) (X + 0)  /* Extended Function Enable Registers */
> +#define WDT_EFIR(X) (X + 0)  /* Extended Function Index Register(same as EFER) */
> +#define WDT_EFDR(X) (WDT_EFIR(X) + 1) /* Extended Function Data Register */
> +#define CHIPID_MASK 0xFFF0
> +
> +#define NCT6692_MAX_IO_RETRY_NUM 0x300
> +
> +#define NCT6692_EC_NAME "nct6692_ec"
> +#define NCT6692_EC_REPORT_NAME "nct6692_ec_rep"
> +#define NCT6692_HWM_CFG		 0x180
> +
> +#define NCT6692_SIO_UNLOCK_KEY 0x87
> +#define NCT6692_SIO_LOCK_KEY 0xAA
> +
> +#define NCT6692_LD_NUM_SHM 0x0F
> +#define NCT6692_LD_WIN2_BASE_ADDR 0xF8
> +#define NCT6692_LD_REPORT_BASE_ADDR 0xE4
> +
> +// Host Interface WIN2 offset definition
> +#define SHM_WIN_MOD_OFFSET 0x01
> +#define SHM_WIN_CMD_OFFSET 0x02
> +#define SHM_WIN_SEL_OFFSET 0x03
> +#define SHM_WIN_CTL_OFFSET 0x04
> +#define VAL_SHM_WIN_CTRL_WR 0x40
> +#define VAL_SHM_WIN_CTRL_RD 0x80
> +#define SHM_WIN_ID_OFFSET 0x08
> +#define SHM_WIN_DAT_OFFSET 0x10
> +
> +struct nct6692_shm_t {
> +	u_char *base_addr;
> +	u_long base_phys;
> +	u_char offset_mod;
> +	u_char offset_cmd;
> +	u_char offset_sel;
> +	u_char offset_ctl;
> +	u_char offset_id;
> +	u_char offset_dat;
> +	u_char *report_addr;
> +	u_long report_phys;
> +};
> +
> +/* REGs definitions */
> +enum nct6692_channel_type {
> +	NCT6692_CHANNEL_DEFAULT,
> +	NCT6692_CHANNEL_REPORT,      /* Not used in this driver. */
> +};
> +
> +struct nct6692_sio_data {
> +	u_long base_phys;
> +	u_long report_phys;
> +	int sioreg;
> +};
> +
> +struct nct6692_reg_t {
> +	u_char channel;  /* nct6692_channel_type */
> +	u_char mod;
> +	u_char cmd;
> +	u_char sel;
> +	u_int idx;
> +};
> +
> +struct nct6692_data_t {
> +	struct nct6692_shm_t shm;
> +	struct nct6692_reg_t cfg;
> +	struct nct6692_reg_t cnt;
> +	u_char timeout;
> +	struct watchdog_device wdt;
> +};
> +
> +static inline void superio_outb(int ioreg, int reg, int val)
> +{
> +	outb(reg, WDT_EFER(ioreg));
> +	outb(val, WDT_EFDR(ioreg));
> +}
> +
> +static inline int superio_inb(int ioreg, int reg)
> +{
> +	outb(reg, WDT_EFER(ioreg));
> +	return inb(WDT_EFDR(ioreg));
> +}
> +
> +static inline int superio_enter(int key, int addr, const char *name)
> +{
> +	if (!request_muxed_region(addr, 2, name)) {
> +		pr_err("I/O address 0x%04x already in use\n", addr);
> +		return -EBUSY;
> +	}
> +	outb_p(key, WDT_EFER(addr)); /* Enter extended function mode */
> +	outb_p(key, WDT_EFER(addr)); /* Again according to manual */
> +
> +	return 0;
> +}
> +
> +static inline void superio_select(int ioreg, int ld)
> +{
> +	superio_outb(ioreg, 0x07, ld);
> +}
> +
> +static inline void superio_exit(int key, int addr)
> +{
> +	outb_p(key, WDT_EFER(addr)); /* Leave extended function mode */
> +	release_region(addr, 2);
> +}
> +
> +/*
> + * The following several functions are used to access host interface according
> + * to the definition of memory region, reg (as a base addr) and an index offset
> + * It uses (shm.base_addr + shm.offset) format to locate the data area of the
> + * host interface channel. Then access the address "reg.idx + idx_offset" that
> + * are suitable for a loop accessing. Where the idx_offset is an extra offset
> + * based on the definition of reg for accessing the address based on the reg.
> + *
> + * Functions with suffix of 'report' are used to access report channel.
> + */
> +
> +int read_shm_win(const struct nct6692_shm_t *shm,
> +		 const struct nct6692_reg_t *reg,
> +		 u_char idx_offset)
> +{
> +	int retval;
> +	u_char pre_id;
> +	u_char new_id;
> +	u_int count = 0;
> +
> +	if (!request_mem_region(shm->base_phys, 256, NCT6692_EC_NAME)) {
> +		pr_err("nuv:request channel mutex fail (base_addr=%lX)\n",
> +		       shm->base_phys);
> +		retval = -EBUSY;
> +		goto exit;
> +	}
> +
> +	iowrite8(reg->mod, shm->base_addr + shm->offset_mod);
> +	iowrite8(reg->cmd, shm->base_addr + shm->offset_cmd);
> +	iowrite8(reg->sel, shm->base_addr + shm->offset_sel);
> +	pre_id = ioread8(shm->base_addr + shm->offset_id);
> +	iowrite8(VAL_SHM_WIN_CTRL_RD, shm->base_addr + shm->offset_ctl);
> +	do {
> +		new_id = ioread8(shm->base_addr + shm->offset_id);
> +		if (count == NCT6692_MAX_IO_RETRY_NUM) {
> +			pr_warn("nuv:Wait ID count timeout in %s!\n", __func__);
> +			retval = 0;
> +			goto exit_release;
> +		}
> +		count++;
> +	} while (pre_id == new_id);
> +	retval = ioread8(shm->base_addr + shm->offset_dat + reg->idx + idx_offset);
> +
> +exit_release:
> +	release_mem_region(shm->base_phys, 256);
> +exit:
> +	return retval;
> +}
> +
> +int write_shm_win(const struct nct6692_shm_t *shm,
> +		  const struct nct6692_reg_t *reg,
> +		  u_char idx_offset,
> +		  u_char val)
> +{
> +	int err = 0;
> +	u_char pre_id;
> +	u_char new_id;
> +	u_int count = 0;
> +
> +	if (!request_mem_region(shm->base_phys, 256, NCT6692_EC_NAME)) {
> +		pr_err("nuv:request channel mutex fail (base_addr=%lX)\n",
> +		       shm->base_phys);
> +		err = -EBUSY;
> +		goto err_exit;
> +	}
> +
> +	iowrite8(reg->mod, shm->base_addr + shm->offset_mod);
> +	iowrite8(reg->cmd, shm->base_addr + shm->offset_cmd);
> +	iowrite8(reg->sel, shm->base_addr + shm->offset_sel);
> +
> +	pre_id = ioread8(shm->base_addr + shm->offset_id);
> +	iowrite8(VAL_SHM_WIN_CTRL_RD, shm->base_addr + shm->offset_ctl);
> +	do {
> +		new_id = ioread8(shm->base_addr + shm->offset_id);
> +		if (count == NCT6692_MAX_IO_RETRY_NUM) {
> +			pr_warn("nuv:Wait ID count timeout in %s!\n", __func__);
> +			err = -EINVAL;
> +			goto err_exit_release;
> +		}
> +		count++;
> +	} while (pre_id == new_id);
> +
> +	iowrite8(val, shm->base_addr + shm->offset_dat + reg->idx + idx_offset);
> +
> +	pre_id = new_id;
> +
> +	iowrite8(VAL_SHM_WIN_CTRL_WR, shm->base_addr + shm->offset_ctl);
> +	do {
> +		new_id = ioread8(shm->base_addr + shm->offset_id);
> +		if (count == NCT6692_MAX_IO_RETRY_NUM) {
> +			pr_warn("nuv:Wait ID count timeout in %s!\n", __func__);
> +			err = -EINVAL;
> +			goto err_exit_release;
> +		}
> +		count++;
> +	} while (pre_id == new_id);
> +
> +err_exit_release:
> +	release_mem_region(shm->base_phys, 256);
> +
> +err_exit:
> +	return err;
> +}
> +
> +int read_shm_report(const struct nct6692_shm_t *shm,
> +		    const struct nct6692_reg_t *reg,
> +		    u_char idx_offset)
> +{
> +	int val;
> +
> +	if (!request_mem_region(shm->report_phys, 256,
> +				NCT6692_EC_REPORT_NAME)) {
> +		pr_err("nuv:request channel mutex fail (base_addr=%lX)\n",
> +		       shm->report_phys);
> +		return -EBUSY;
> +	}
> +
> +	val = ioread8(shm->report_addr + reg->idx + idx_offset);
> +
> +	release_mem_region(shm->report_phys, 256);
> +
> +	return val;
> +}
> +
> +int read_shm(const struct nct6692_shm_t *shm,
> +	     const struct nct6692_reg_t *reg)
> +{
> +	if (reg->channel == NCT6692_CHANNEL_DEFAULT)
> +		return read_shm_win(shm, reg, 0);
> +
> +	return read_shm_report(shm, reg, 0);
> +}
> +
> +int write_shm(const struct nct6692_shm_t *shm,
> +	      const struct nct6692_reg_t *reg,
> +	      u_char val)
> +{
> +	if (reg->channel == NCT6692_CHANNEL_DEFAULT)
> +		return write_shm_win(shm, reg, 0, val);
> +
> +	pr_warn("Report channel CAN NOT be written!\n");
> +	return -EINVAL;
> +}
> +
> +int read_shm_with_offset(const struct nct6692_shm_t *shm,
> +			 const struct nct6692_reg_t *reg,
> +			 u_char idx_offset)
> +{
> +	if (reg->channel == NCT6692_CHANNEL_DEFAULT)
> +		return read_shm_win(shm, reg, idx_offset);
> +
> +	return read_shm_report(shm, reg, idx_offset);
> +}
> +
> +int write_shm_with_offset(const struct nct6692_shm_t *shm,
> +			  const struct nct6692_reg_t *reg,
> +			  u_char idx_offset,
> +			  u_char val)
> +{
> +	if (reg->channel == NCT6692_CHANNEL_DEFAULT)
> +		return write_shm_win(shm, reg, idx_offset, val);
> +
> +	pr_warn("Report channel CAN NOT be written!\n");
> +	return -EINVAL;
> +}
> +
> +static int nct6692_wdt_init(struct watchdog_device *wdog)
> +{
> +	int err = 0;
> +	u_char timeout, cfg;
> +	struct nct6692_data_t *data = watchdog_get_drvdata(wdog);
> +
> +	timeout = read_shm(&data->shm, &data->cnt);
> +	cfg = read_shm(&data->shm, &data->cfg);
> +
> +	if (timeout < 0)
> +		return timeout;
> +	if (timeout == 0)
> +		return 0;
> +
> +	if (early_disable) {
> +		pr_warn("Stopping previously enabled watchdog until userland kicks in\n");
> +		// Disable WDT and clear timeout count
> +		data->timeout = 0;
> +		err = write_shm(&data->shm, &data->cnt, data->timeout);
> +	} else {
> +		pr_info("Watchdog already running. Resetting timeout to %d sec\n",
> +			wdog->timeout);
> +		data->timeout = wdog->timeout;
> +		err = write_shm(&data->shm, &data->cnt, data->timeout);
> +	}
> +
> +	return err;
> +}
> +
> +static int nct6692_wdt_enable(bool enable, u_int timeout,
> +				struct nct6692_data_t *data)
> +{
> +	u_char reg;
> +
> +	reg = read_shm(&data->shm, &data->cfg);
> +
> +	if (enable) {
> +		write_shm(&data->shm, &data->cfg, 0x02);
> +		/* ^^^^ 0x00 to disable reboot */
> +		data->timeout = timeout;
> +		write_shm(&data->shm, &data->cnt, data->timeout);
> +		reg = read_shm(&data->shm, &data->cfg);
> +	} else {
> +		data->timeout = 0;
> +		write_shm(&data->shm, &data->cnt, data->timeout);
> +	}
> +	reg = read_shm(&data->shm, &data->cfg);
> +	reg = read_shm(&data->shm, &data->cnt);
> +	return 0;
> +}
> +
> +static int nct6692_wdt_set_time(struct watchdog_device *wdog, u_int timeout)
> +{
> +	struct nct6692_data_t *data = watchdog_get_drvdata(wdog);
> +
> +	if (timeout != 0)
> +		nct6692_wdt_enable(true, timeout, data);
> +	else
> +		nct6692_wdt_enable(false, timeout, data);
> +
> +	return 0;
> +}
> +
> +static int nct6692_wdt_setup(struct watchdog_device *wdt)
> +{
> +	int err = 0;
> +
> +	watchdog_stop_on_reboot(wdt);
> +
> +	err = nct6692_wdt_init(wdt);
> +	if (err) {
> +		pr_err("failed to initialize watchdog (err=%d)\n", err);
> +		return err;
> +	}
> +	return err;
> +}
> +
> +static int nct6692_wdt_start(struct watchdog_device *wdog)
> +{
> +	struct nct6692_data_t *data = watchdog_get_drvdata(wdog);
> +
> +	nct6692_wdt_setup(wdog);
> +	nct6692_wdt_set_time(wdog, data->timeout);
> +	return 0;
> +}
> +
> +static int nct6692_wdt_stop(struct watchdog_device *wdog)
> +{
> +	return nct6692_wdt_set_time(wdog, 0);
> +}
> +
> +static int nct6692_wdt_set_timeout(struct watchdog_device *wdog,
> +				     u_int timeout)
> +{
> +	wdog->timeout = timeout;
> +	return 0;
> +}
> +
> +static u_int nct6692_wdt_get_timeleft(struct watchdog_device *wdog)
> +{
> +	struct nct6692_data_t *data = watchdog_get_drvdata(wdog);
> +	u_int timeleft;
> +
> +	timeleft = read_shm(&data->shm, &data->cnt);
> +	return timeleft;
> +}
> +
> +static int nct6692_wdt_ping(struct watchdog_device *wdt)
> +{
> +	struct nct6692_data_t *data = watchdog_get_drvdata(wdt);
> +	int timeout;
> +
> +	/*
> +	 * Note:
> +	 * NCT6692 does not support refreshing WDT_TIMER_REG register when
> +	 * the watchdog is active. Please disable watchdog before feeding
> +	 * the watchdog and enable it again.
> +	 */
> +	/* Disable soft watchdog timer */
> +	timeout = 0;
> +	nct6692_wdt_enable(false, timeout, data);
> +
> +	/* feed watchdog */
> +	timeout = wdt->timeout;
> +	write_shm(&data->shm, &data->cnt, data->timeout);
> +
> +	/* Enable soft watchdog timer */
> +	nct6692_wdt_enable(true, timeout, data);
> +	return 0;
> +
> +}
> +
> +static const struct watchdog_info nct6692_wdt_info = {
> +	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
> +			  WDIOF_MAGICCLOSE,
> +	.identity       = "nct6692 watchdog",
> +};
> +
> +static const struct watchdog_ops nct6692_wdt_ops = {
> +	.owner	  = THIS_MODULE,
> +	.start	  = nct6692_wdt_start,
> +	.stop	   = nct6692_wdt_stop,
> +	.ping	   = nct6692_wdt_ping,
> +	.set_timeout    = nct6692_wdt_set_timeout,
> +	.get_timeleft   = nct6692_wdt_get_timeleft,
> +};
> +
> +static int nct6692_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct nct6692_data_t *data = NULL;
> +	struct nct6692_sio_data *sio_data = dev->platform_data;
> +	struct resource *res;
> +
> +	pr_info("Probe NCT6692 called\n");
> +	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
> +
> +	data = kzalloc(sizeof(struct nct6692_data_t), GFP_KERNEL);
> +	if (!data)
> +		return -ENOMEM;
> +
> +	// init value
> +	data->shm.base_addr = 0;
> +	data->shm.report_addr = 0;
> +
> +	data->shm.base_phys = sio_data->base_phys;
> +	data->shm.base_addr = (u_char *)ioremap_cache(data->shm.base_phys, 256);
> +
> +	data->shm.offset_mod = SHM_WIN_MOD_OFFSET;
> +	data->shm.offset_cmd = SHM_WIN_CMD_OFFSET;
> +	data->shm.offset_sel = SHM_WIN_SEL_OFFSET;
> +	data->shm.offset_ctl = SHM_WIN_CTL_OFFSET;
> +	data->shm.offset_id = SHM_WIN_ID_OFFSET;
> +	data->shm.offset_dat = SHM_WIN_DAT_OFFSET;
> +
> +	// Base for REPORT Channel
> +	data->shm.report_phys = sio_data->report_phys;
> +	data->shm.report_addr = (u_char *)ioremap_cache(data->shm.report_phys, 256);
> +
> +	data->cfg.channel = NCT6692_CHANNEL_DEFAULT;
> +	data->cfg.mod = 0x10;
> +	data->cfg.cmd = 0;
> +	data->cfg.sel = 0;
> +	data->cfg.idx = 0x15;
> +	data->cnt.channel = NCT6692_CHANNEL_DEFAULT;
> +	data->cnt.mod = 0x10;
> +	data->cnt.cmd = 0;
> +	data->cnt.sel = 0;
> +	data->cnt.idx = 0x16;
> +
> +	data->wdt.ops = &nct6692_wdt_ops;
> +	data->wdt.info = &nct6692_wdt_info;
> +
> +	data->wdt.timeout = WATCHDOG_TIMEOUT; /* Set default timeout */
> +	data->wdt.min_timeout = MIN_TIMEOUT;
> +	data->wdt.max_timeout = MAX_TIMEOUT;
> +	data->wdt.parent = &pdev->dev;
> +
> +	watchdog_init_timeout(&data->wdt, timeout, &pdev->dev);
> +	watchdog_set_nowayout(&data->wdt, nowayout);
> +	watchdog_set_drvdata(&data->wdt, data);
> +
> +	watchdog_stop_on_unregister(&data->wdt);
> +
> +	return devm_watchdog_register_device(dev, &data->wdt);
> +}
> +
> +static struct platform_driver nct6692_driver = {
> +	.driver = {
> +		.name = DRVNAME,
> +		/*.pm   = NCT6692_DEV_PM_OPS,*/
> +	},
> +	.probe	= nct6692_probe,
> +};
> +
> +static int __init nct6692_find(int addr, u_long *base_phys,
> +			      u_long *report_phys)
> +{
> +	u16 val;
> +	int err = 0;
> +	u_long tmp_base_phys;
> +	u_long tmp_report_phys;
> +
> +	err = superio_enter(NCT6692_SIO_UNLOCK_KEY, addr, NCT6692);
> +	if (err)
> +		return err;
> +
> +	val = superio_inb(addr, 0x20);
> +	val = ((val << 8) | (superio_inb(addr, 0x21) & 0xFF)) & CHIPID_MASK;
> +
> +	if (val != NCT6692_ID) {
> +		err = -ENODEV;
> +		goto fail;
> +	}
> +
> +	superio_select(addr, NCT6692_LD_NUM_SHM);
> +	tmp_base_phys = ((superio_inb(addr, NCT6692_LD_WIN2_BASE_ADDR) & 0xFF) |
> +			 ((superio_inb(addr, NCT6692_LD_WIN2_BASE_ADDR + 1) & 0xFF) << 8) |
> +			 ((superio_inb(addr, NCT6692_LD_WIN2_BASE_ADDR + 2) & 0xFF) << 16) |
> +			 ((superio_inb(addr, NCT6692_LD_WIN2_BASE_ADDR + 3) & 0xFF) << 24)) &
> +		0xFFFFFFFF;
> +
> +	if ((tmp_base_phys == 0xFFFFFFFF) || (tmp_base_phys == 0)) {
> +		err = -ENODEV;
> +		goto fail;
> +	}
> +
> +	tmp_report_phys = ((superio_inb(addr, NCT6692_LD_REPORT_BASE_ADDR) & 0xFF) |
> +			   ((superio_inb(addr, NCT6692_LD_REPORT_BASE_ADDR + 1) & 0xFF) << 8) |
> +			   ((superio_inb(addr, NCT6692_LD_REPORT_BASE_ADDR + 2) & 0xFF) << 16) |
> +			   ((superio_inb(addr, NCT6692_LD_REPORT_BASE_ADDR + 3) & 0xFF) << 24)) &
> +		0xFFFFFFFF;
> +
> +	if ((tmp_report_phys == 0xFFFFFFFF) || (tmp_report_phys == 0)) {
> +		err = -ENODEV;
> +		goto fail;
> +	}
> +
> +fail:
> +	superio_exit(NCT6692_SIO_LOCK_KEY, addr);
> +	if (!err) {
> +		if (base_phys != NULL)
> +			*base_phys = tmp_base_phys;
> +		if (report_phys != NULL)
> +			*report_phys = tmp_report_phys;
> +	}
> +	return err;
> +}
> +
> +static struct platform_device *pdev;
> +
> +static int __init nct6692_init(void)
> +{
> +	struct nct6692_sio_data sio_data;
> +	int sioaddr[2] = { 0x2e, 0x4e };
> +	struct resource res;
> +	int err;
> +	int address;
> +	bool found = false;
> +	u_long base_phys = 0;
> +	u_long report_phys = 0;
> +
> +	platform_driver_register(&nct6692_driver);
> +
> +	/*
> +	 * initialize sio_data->kind and sio_data->sioreg.
> +	 *
> +	 * when Super-I/O functions move to a separate file, the Super-I/O
> +	 * driver will probe 0x2e and 0x4e and auto-detect the presence of a
> +	 * nct6692 hardware monitor, and call probe()
> +	 */
> +	err = nct6692_find(sioaddr[0], &base_phys, &report_phys);
> +	if (err) {
> +		err = nct6692_find(sioaddr[1], &base_phys, &report_phys);
> +		if (err)
> +			return -ENODEV;
> +	}
> +	found = true;
> +	sio_data.base_phys = base_phys;
> +	sio_data.report_phys = report_phys;
> +
> +	pr_info("NCT6692 device found\n");
> +	pdev = platform_device_alloc(DRVNAME, base_phys);
> +	if (!pdev) {
> +		err = -ENOMEM;
> +		goto exit_device_unregister;
> +	}
> +	err = platform_device_add_data(pdev, &sio_data,
> +					sizeof(struct nct6692_sio_data));
> +	if (err)
> +		goto exit_device_put;
> +
> +	memset(&res, 0, sizeof(res));
> +	res.name = DRVNAME;
> +	res.start = address + IOREGION_OFFSET;
> +	res.end = address + IOREGION_OFFSET + IOREGION_LENGTH - 1;
> +	res.flags = IORESOURCE_IO;
> +
> +	err = acpi_check_resource_conflict(&res);
> +	if (err) {
> +		platform_device_put(pdev);
> +		pdev = NULL;
> +	}
> +
> +	err = platform_device_add_resources(pdev, &res, 1);
> +	if (err)
> +		goto exit_device_put;
> +
> +	/* platform_device_add calls probe() */
> +	err = platform_device_add(pdev);
> +	if (err)
> +		goto exit_device_put;
> +
> +	if (!found) {
> +		err = -ENODEV;
> +		goto exit_unregister;
> +	}
> +
> +	return 0;
> +exit_device_put:
> +	platform_device_put(pdev);
> +exit_device_unregister:
> +	if (pdev)
> +		platform_device_unregister(pdev);
> +exit_unregister:
> +	platform_driver_unregister(&nct6692_driver);
> +	return err;
> +}
> +
> +static void __exit nct6692_exit(void)
> +{
> +	platform_device_unregister(pdev);
> +	platform_driver_unregister(&nct6692_driver);
> +}
> +
> +MODULE_AUTHOR("David Ober <dober@...ovo.com>");
> +MODULE_DESCRIPTION("NCT6692D driver");
> +MODULE_LICENSE("GPL");
> +
> +module_init(nct6692_init);
> +module_exit(nct6692_exit);
> +

Powered by blists - more mailing lists