linux-kernel - [PATCH v2 3/3] net: phy: realtek: Disable clock on suspend

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230602182659.307876-4-detlev.casanova@collabora.com>
Date:   Fri,  2 Jun 2023 14:26:59 -0400
From:   Detlev Casanova <detlev.casanova@...labora.com>
To:     linux-kernel@...r.kernel.org
Cc:     Andrew Lunn <andrew@...n.ch>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <linux@...linux.org.uk>,
        "David S . Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Florian Fainelli <f.fainelli@...il.com>,
        netdev@...r.kernel.org, devicetree@...r.kernel.org,
        Detlev Casanova <detlev.casanova@...labora.com>
Subject: [PATCH v2 3/3] net: phy: realtek: Disable clock on suspend

For PHYs that call rtl821x_probe() where an external clock can be
configured, make sure that the clock is disabled
when ->suspend() is called and enabled on resume.

The PHY_ALWAYS_CALL_SUSPEND is added to ensure that the suspend function
is actually always called.

Signed-off-by: Detlev Casanova <detlev.casanova@...labora.com>
---
 drivers/net/phy/realtek.c | 24 ++++++++++++++++++++++--
 1 file changed, 22 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index b13dd0b3c99e..62eac4835def 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -426,10 +426,28 @@ static int rtl8211f_config_init(struct phy_device *phydev)
 	return genphy_soft_reset(phydev);
 }
 
+static int rtl821x_suspend(struct phy_device *phydev)
+{
+	struct rtl821x_priv *priv = phydev->priv;
+	int ret = genphy_suspend(phydev);
+
+	if (ret)
+		return ret;
+
+	if (!phydev->wol_enabled)
+		clk_disable_unprepare(priv->clk);
+
+	return ret;
+}
+
 static int rtl821x_resume(struct phy_device *phydev)
 {
+	struct rtl821x_priv *priv = phydev->priv;
 	int ret;
 
+	if (!phydev->wol_enabled)
+		clk_prepare_enable(priv->clk);
+
 	ret = genphy_resume(phydev);
 	if (ret < 0)
 		return ret;
@@ -934,10 +952,11 @@ static struct phy_driver realtek_drvs[] = {
 		.read_status	= rtlgen_read_status,
 		.config_intr	= &rtl8211f_config_intr,
 		.handle_interrupt = rtl8211f_handle_interrupt,
-		.suspend	= genphy_suspend,
+		.suspend	= rtl821x_suspend,
 		.resume		= rtl821x_resume,
 		.read_page	= rtl821x_read_page,
 		.write_page	= rtl821x_write_page,
+		.flags		= PHY_ALWAYS_CALL_SUSPEND,
 	}, {
 		PHY_ID_MATCH_EXACT(RTL_8211FVD_PHYID),
 		.name		= "RTL8211F-VD Gigabit Ethernet",
@@ -946,10 +965,11 @@ static struct phy_driver realtek_drvs[] = {
 		.read_status	= rtlgen_read_status,
 		.config_intr	= &rtl8211f_config_intr,
 		.handle_interrupt = rtl8211f_handle_interrupt,
-		.suspend	= genphy_suspend,
+		.suspend	= rtl821x_suspend,
 		.resume		= rtl821x_resume,
 		.read_page	= rtl821x_read_page,
 		.write_page	= rtl821x_write_page,
+		.flags		= PHY_ALWAYS_CALL_SUSPEND,
 	}, {
 		.name		= "Generic FE-GE Realtek PHY",
 		.match_phy_device = rtlgen_match_phy_device,
-- 
2.39.3