Message-ID: <506c0a1e-a839-c9b7-1b04-7fb3af535fe0@starfivetech.com>
Date:   Fri, 2 Jun 2023 17:45:01 +0800
From:   Xingyu Wu <xingyu.wu@...rfivetech.com>
To:     Daniel Lezcano <daniel.lezcano@...aro.org>,
        Thomas Gleixner <tglx@...utronix.de>
CC:     <devicetree@...r.kernel.org>, <linux-riscv@...ts.infradead.org>,
        "Krzysztof Kozlowski" <krzysztof.kozlowski+dt@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Paul Walmsley <paul.walmsley@...ive.com>,
        "Palmer Dabbelt" <palmer@...belt.com>,
        Albert Ou <aou@...s.berkeley.edu>,
        "Philipp Zabel" <p.zabel@...gutronix.de>,
        Samin Guo <samin.guo@...rfivetech.com>,
        <linux-kernel@...r.kernel.org>, Conor Dooley <conor@...nel.org>
Subject: Re: [PATCH v2 2/3] clocksource: Add StarFive timer driver

On 2023/3/20 21:54, Xingyu Wu wrote:
> Add timer driver for the StarFive JH7110 SoC.
> 
> Signed-off-by: Xingyu Wu <xingyu.wu@...rfivetech.com>
> ---
>  MAINTAINERS                          |   7 +
>  drivers/clocksource/Kconfig          |  12 +
>  drivers/clocksource/Makefile         |   1 +
>  drivers/clocksource/timer-starfive.c | 390 +++++++++++++++++++++++++++
>  drivers/clocksource/timer-starfive.h |  96 +++++++
>  5 files changed, 506 insertions(+)
>  create mode 100644 drivers/clocksource/timer-starfive.c
>  create mode 100644 drivers/clocksource/timer-starfive.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 958b7ec118b4..dac6298d8f6e 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19958,6 +19958,13 @@ S:	Maintained
>  T:	git https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/
>  F:	drivers/soc/starfive/
>  
> +STARFIVE TIMER DRIVER
> +M:	Samin Guo <samin.guo@...rfivetech.com>
> +M:	Xingyu Wu <xingyu.wu@...rfivetech.com>
> +S:	Supported
> +F:	Documentation/devicetree/bindings/timer/starfive*
> +F:	drivers/clocksource/timer-starfive*
> +
>  STARFIVE TRNG DRIVER
>  M:	Jia Jie Ho <jiajie.ho@...rfivetech.com>
>  S:	Supported
> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> index 5fc8f0e7fb38..35daf07d4db7 100644
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -630,6 +630,18 @@ config RISCV_TIMER
>  	  is accessed via both the SBI and the rdcycle instruction.  This is
>  	  required for all RISC-V systems.
>  
> +config STARFIVE_TIMER
> +	bool "Timer for the STARFIVE SoCs"
> +	depends on ARCH_STARFIVE || COMPILE_TEST
> +	select TIMER_OF
> +	select CLKSRC_MMIO
> +	default ARCH_STARFIVE
> +	help
> +	  This enables the timer for StarFive SoCs. On RISC-V platform,
> +	  the system has started RISCV_TIMER. But you can also use this timer
> +	  to do a lot more on StarFive SoCs. This timer can provide high
> +	  precision and four channels to use in JH7110 SoC.
> +
>  config CLINT_TIMER
>  	bool "CLINT Timer for the RISC-V platform" if COMPILE_TEST
>  	depends on GENERIC_SCHED_CLOCK && RISCV
> diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
> index 64ab547de97b..276695d95cdc 100644
> --- a/drivers/clocksource/Makefile
> +++ b/drivers/clocksource/Makefile
> @@ -80,6 +80,7 @@ obj-$(CONFIG_INGENIC_TIMER)		+= ingenic-timer.o
>  obj-$(CONFIG_CLKSRC_ST_LPC)		+= clksrc_st_lpc.o
>  obj-$(CONFIG_X86_NUMACHIP)		+= numachip.o
>  obj-$(CONFIG_RISCV_TIMER)		+= timer-riscv.o
> +obj-$(CONFIG_STARFIVE_TIMER)		+= timer-starfive.o
>  obj-$(CONFIG_CLINT_TIMER)		+= timer-clint.o
>  obj-$(CONFIG_CSKY_MP_TIMER)		+= timer-mp-csky.o
>  obj-$(CONFIG_GX6605S_TIMER)		+= timer-gx6605s.o
> diff --git a/drivers/clocksource/timer-starfive.c b/drivers/clocksource/timer-starfive.c
> new file mode 100644
> index 000000000000..53163948ed86
> --- /dev/null
> +++ b/drivers/clocksource/timer-starfive.c
> @@ -0,0 +1,390 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Starfive Timer driver
> + *
> + * Copyright (C) 2022 StarFive Technology Co., Ltd.
> + *
> + * Author:
> + * Xingyu Wu <xingyu.wu@...rfivetech.com>
> + * Samin Guo <samin.guo@...rfivetech.com>
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clockchips.h>
> +#include <linux/clocksource.h>
> +#include <linux/err.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/irq.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +#include <linux/sched_clock.h>
> +
> +#include "timer-starfive.h"
> +
> +static const struct starfive_timer_chan_base starfive_timer_jh7110_base = {
> +	.ctrl		= STARFIVE_TIMER_JH7110_CTL,
> +	.load		= STARFIVE_TIMER_JH7110_LOAD,
> +	.enable		= STARFIVE_TIMER_JH7110_ENABLE,
> +	.reload		= STARFIVE_TIMER_JH7110_RELOAD,
> +	.value		= STARFIVE_TIMER_JH7110_VALUE,
> +	.intclr		= STARFIVE_TIMER_JH7110_INT_CLR,
> +	.intmask	= STARFIVE_TIMER_JH7110_INT_MASK,
> +	.channel_num	= STARFIVE_TIMER_CH_4,
> +	.channel_base	= {STARFIVE_TIMER_CH_BASE(0), STARFIVE_TIMER_CH_BASE(1),
> +			   STARFIVE_TIMER_CH_BASE(2), STARFIVE_TIMER_CH_BASE(3)},
> +};
> +
> +static inline struct starfive_clkevt *to_starfive_clkevt(struct clock_event_device *evt)
> +{
> +	return container_of(evt, struct starfive_clkevt, evt);
> +}
> +
> +/* 0:continuous-run mode, 1:single-run mode */
> +static inline void starfive_timer_set_mod(struct starfive_clkevt *clkevt, int mod)
> +{
> +	writel(mod, clkevt->ctrl);
> +}
> +
> +/* Interrupt Mask Register, 0:Unmask, 1:Mask */
> +static inline void starfive_timer_int_enable(struct starfive_clkevt *clkevt)
> +{
> +	writel(STARFIVE_TIMER_INTMASK_DIS, clkevt->intmask);
> +}
> +
> +static inline void starfive_timer_int_disable(struct starfive_clkevt *clkevt)
> +{
> +	writel(STARFIVE_TIMER_INTMASK_ENA, clkevt->intmask);
> +}
> +
> +/*
> + * BIT(0): Read value represent channel intr status.
> + * Write 1 to this bit to clear interrupt. Write 0 has no effects.
> + * BIT(1): "1" means that it is clearing interrupt. BIT(0) can not be written.
> + */
> +static inline int starfive_timer_int_clear(struct starfive_clkevt *clkevt)
> +{
> +	u32 value;
> +	int ret;
> +
> +	/* waiting interrupt can be to clearing */
> +	ret = readl_poll_timeout_atomic(clkevt->intclr, value,
> +					!(value & STARFIVE_TIMER_JH7110_INT_CLR_AVA_MASK),
> +					STARFIVE_DELAY_US, STARFIVE_TIMEOUT_US);
> +	if (!ret)
> +		writel(0x1, clkevt->intclr);
> +
> +	return ret;
> +}
> +
> +/*
> + * The initial value to be loaded into the
> + * counter and is also used as the reload value.
> + * val = clock rate --> 1s
> + */
> +static inline void starfive_timer_set_load(struct starfive_clkevt *clkevt, u32 val)
> +{
> +	writel(val, clkevt->load);
> +}
> +
> +static inline u32 starfive_timer_get_val(struct starfive_clkevt *clkevt)
> +{
> +	return readl(clkevt->value);
> +}
> +
> +/*
> + * Write RELOAD register to reload preset value to counter.
> + * (Write 0 and write 1 are both ok)
> + */
> +static inline void starfive_timer_set_reload(struct starfive_clkevt *clkevt)
> +{
> +	writel(0, clkevt->reload);
> +}
> +
> +static inline void starfive_timer_enable(struct starfive_clkevt *clkevt)
> +{
> +	writel(STARFIVE_TIMER_ENA, clkevt->enable);
> +}
> +
> +static inline void starfive_timer_disable(struct starfive_clkevt *clkevt)
> +{
> +	writel(STARFIVE_TIMER_DIS, clkevt->enable);
> +}
> +
> +static int starfive_timer_int_init_enable(struct starfive_clkevt *clkevt)
> +{
> +	int ret;
> +
> +	starfive_timer_int_disable(clkevt);
> +	ret = starfive_timer_int_clear(clkevt);
> +	if (ret)
> +		return ret;
> +
> +	starfive_timer_int_enable(clkevt);
> +	starfive_timer_enable(clkevt);
> +
> +	return 0;
> +}
> +
> +static int starfive_timer_shutdown(struct clock_event_device *evt)
> +{
> +	struct starfive_clkevt *clkevt = to_starfive_clkevt(evt);
> +
> +	starfive_timer_disable(clkevt);
> +	return starfive_timer_int_clear(clkevt);
> +}
> +
> +static void starfive_timer_suspend(struct clock_event_device *evt)
> +{
> +	struct starfive_clkevt *clkevt = to_starfive_clkevt(evt);
> +
> +	clkevt->reload_val = starfive_timer_get_val(clkevt);
> +	starfive_timer_shutdown(evt);
> +}
> +
> +static void starfive_timer_resume(struct clock_event_device *evt)
> +{
> +	struct starfive_clkevt *clkevt = to_starfive_clkevt(evt);
> +
> +	starfive_timer_set_load(clkevt, clkevt->reload_val);
> +	starfive_timer_set_reload(clkevt);
> +	starfive_timer_int_enable(clkevt);
> +	starfive_timer_enable(clkevt);
> +}
> +
> +static int starfive_timer_tick_resume(struct clock_event_device *evt)
> +{
> +	starfive_timer_resume(evt);
> +
> +	return 0;
> +}
> +
> +static int starfive_clocksource_init(struct starfive_clkevt *clkevt)
> +{
> +	int ret;
> +
> +	starfive_timer_set_mod(clkevt, STARFIVE_TIMER_MOD_CONTIN);
> +	starfive_timer_set_load(clkevt, STARFIVE_TIMER_MAX_TICKS);
> +	ret = starfive_timer_int_init_enable(clkevt);
> +	if (ret)
> +		return ret;
> +
> +	return clocksource_mmio_init(clkevt->value, clkevt->name, clkevt->rate,
> +				     STARFIVE_CLOCK_SOURCE_RATING, STARFIVE_VALID_BITS,
> +				     clocksource_mmio_readl_down);
> +}
> +
> +/* IRQ handler for the timer */
> +static irqreturn_t starfive_timer_interrupt(int irq, void *priv)
> +{
> +	struct clock_event_device *evt = (struct clock_event_device *)priv;
> +	struct starfive_clkevt *clkevt = to_starfive_clkevt(evt);
> +
> +	if (starfive_timer_int_clear(clkevt))
> +		return IRQ_NONE;
> +
> +	if (evt->event_handler)
> +		evt->event_handler(evt);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int starfive_timer_set_periodic(struct clock_event_device *evt)
> +{
> +	struct starfive_clkevt *clkevt = to_starfive_clkevt(evt);
> +
> +	starfive_timer_disable(clkevt);
> +	starfive_timer_set_mod(clkevt, STARFIVE_TIMER_MOD_CONTIN);
> +	starfive_timer_set_load(clkevt, clkevt->periodic);
> +
> +	return starfive_timer_int_init_enable(clkevt);
> +}
> +
> +static int starfive_timer_set_oneshot(struct clock_event_device *evt)
> +{
> +	struct starfive_clkevt *clkevt = to_starfive_clkevt(evt);
> +
> +	starfive_timer_disable(clkevt);
> +	starfive_timer_set_mod(clkevt, STARFIVE_TIMER_MOD_SINGLE);
> +	starfive_timer_set_load(clkevt, STARFIVE_TIMER_MAX_TICKS);
> +
> +	return starfive_timer_int_init_enable(clkevt);
> +}
> +
> +static int starfive_timer_set_next_event(unsigned long next,
> +					 struct clock_event_device *evt)
> +{
> +	struct starfive_clkevt *clkevt = to_starfive_clkevt(evt);
> +
> +	starfive_timer_disable(clkevt);
> +	starfive_timer_set_mod(clkevt, STARFIVE_TIMER_MOD_SINGLE);
> +	starfive_timer_set_load(clkevt, next);
> +	starfive_timer_enable(clkevt);
> +
> +	return 0;
> +}
> +
> +static void starfive_set_clockevent(struct clock_event_device *evt)
> +{
> +	evt->features = CLOCK_EVT_FEAT_PERIODIC |
> +			CLOCK_EVT_FEAT_ONESHOT |
> +			CLOCK_EVT_FEAT_DYNIRQ;
> +	evt->set_state_shutdown = starfive_timer_shutdown;
> +	evt->set_state_periodic = starfive_timer_set_periodic;
> +	evt->set_state_oneshot = starfive_timer_set_oneshot;
> +	evt->set_state_oneshot_stopped = starfive_timer_shutdown;
> +	evt->tick_resume = starfive_timer_tick_resume;
> +	evt->set_next_event = starfive_timer_set_next_event;
> +	evt->suspend = starfive_timer_suspend;
> +	evt->resume = starfive_timer_resume;
> +	evt->rating = STARFIVE_CLOCKEVENT_RATING;
> +}
> +
> +static void starfive_clockevents_register(struct starfive_clkevt *clkevt)
> +{
> +	clkevt->rate = clk_get_rate(clkevt->clk);
> +	clkevt->periodic = DIV_ROUND_CLOSEST(clkevt->rate, HZ);
> +
> +	starfive_set_clockevent(&clkevt->evt);
> +	clkevt->evt.name = clkevt->name;
> +	clkevt->evt.irq = clkevt->irq;
> +	clkevt->evt.cpumask = cpu_possible_mask;
> +
> +	clockevents_config_and_register(&clkevt->evt, clkevt->rate,
> +					STARFIVE_TIMER_MIN_TICKS, STARFIVE_TIMER_MAX_TICKS);
> +}
> +
> +static void __init starfive_clkevt_base_init(const struct starfive_timer_chan_base *timer,
> +					     struct starfive_clkevt *clkevt,
> +					     void __iomem *base, int ch)
> +{
> +	void __iomem *channel_base;
> +
> +	channel_base = base + timer->channel_base[ch];
> +	clkevt->base = channel_base;
> +	clkevt->ctrl = channel_base + timer->ctrl;
> +	clkevt->load = channel_base + timer->load;
> +	clkevt->enable = channel_base + timer->enable;
> +	clkevt->reload = channel_base + timer->reload;
> +	clkevt->value = channel_base + timer->value;
> +	clkevt->intclr = channel_base + timer->intclr;
> +	clkevt->intmask = channel_base + timer->intmask;
> +}
> +
> +static int __init starfive_timer_probe(struct platform_device *pdev)
> +{
> +	const struct starfive_timer_chan_base *timer_base = of_device_get_match_data(&pdev->dev);
> +	char name[10];
> +	struct starfive_timer_priv *priv;
> +	struct starfive_clkevt *clkevt;
> +	struct clk *pclk;
> +	struct reset_control *rst;
> +	int ch;
> +	int ret;
> +
> +	priv = devm_kzalloc(&pdev->dev, struct_size(priv, clkevt, timer_base->channel_num),
> +			    GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	priv->base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(priv->base))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(priv->base),
> +				     "failed to map registers\n");
> +
> +	rst = devm_reset_control_get_exclusive(&pdev->dev, "apb");
> +	if (IS_ERR(rst))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(rst), "failed to get apb reset\n");
> +
> +	pclk = devm_clk_get_enabled(&pdev->dev, "apb");
> +	if (IS_ERR(pclk))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(pclk),
> +				     "failed to get & enable apb clock\n");
> +
> +	ret = reset_control_deassert(rst);
> +	if (ret)
> +		goto err;
> +
> +	priv->dev = &pdev->dev;
> +	platform_set_drvdata(pdev, priv);
> +
> +	for (ch = 0; ch < timer_base->channel_num; ch++) {
> +		clkevt = &priv->clkevt[ch];
> +		snprintf(name, sizeof(name), "ch%d", ch);
> +
> +		starfive_clkevt_base_init(timer_base, clkevt, priv->base, ch);
> +		/* Ensure timers are disabled */
> +		starfive_timer_disable(clkevt);
> +
> +		rst = devm_reset_control_get_exclusive(&pdev->dev, name);
> +		if (IS_ERR(rst)) {
> +			ret = PTR_ERR(rst);
> +			goto err;
> +		}
> +
> +		clkevt->clk = devm_clk_get_enabled(&pdev->dev, name);
> +		if (IS_ERR(clkevt->clk)) {
> +			ret = PTR_ERR(clkevt->clk);
> +			goto err;
> +		}
> +
> +		ret = reset_control_deassert(rst);
> +		if (ret)
> +			goto ch_err;
> +
> +		clkevt->irq = platform_get_irq(pdev, ch);
> +		if (clkevt->irq < 0) {
> +			ret = clkevt->irq;
> +			goto ch_err;
> +		}
> +
> +		snprintf(clkevt->name, sizeof(clkevt->name), "%s.ch%d", pdev->name, ch);
> +		starfive_clockevents_register(clkevt);
> +
> +		ret = devm_request_irq(&pdev->dev, clkevt->irq, starfive_timer_interrupt,
> +				       IRQF_TIMER | IRQF_IRQPOLL,
> +				       clkevt->name, &clkevt->evt);
> +		if (ret)
> +			goto ch_err;
> +
> +		ret = starfive_clocksource_init(clkevt);
> +		if (ret)
> +			goto ch_err;
> +	}
> +
> +	return 0;
> +
> +ch_err:
> +	/* Only unregister the failed channel and the rest timer channels continue to work. */
> +	clk_disable_unprepare(clkevt->clk);
> +err:
> +	/* If no other channel successfully registers, pclk should be disabled. */
> +	if (!ch)
> +		clk_disable_unprepare(pclk);
> +
> +	return ret;
> +}
> +
> +static const struct of_device_id starfive_timer_match[] = {
> +	{ .compatible = "starfive,jh7110-timer", .data = &starfive_timer_jh7110_base },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, starfive_timer_match);
> +
> +static struct platform_driver starfive_timer_driver = {
> +	.probe = starfive_timer_probe,
> +	.driver = {
> +		.name = "starfive-timer",
> +		.of_match_table = starfive_timer_match,
> +	},
> +};
> +module_platform_driver(starfive_timer_driver);
> +
> +MODULE_AUTHOR("Xingyu Wu <xingyu.wu@...rfivetech.com>");
> +MODULE_DESCRIPTION("StarFive timer driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/clocksource/timer-starfive.h b/drivers/clocksource/timer-starfive.h
> new file mode 100644
> index 000000000000..62eb630cc98d
> --- /dev/null
> +++ b/drivers/clocksource/timer-starfive.h
> @@ -0,0 +1,96 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2022 StarFive Technology Co., Ltd.
> + */
> +
> +#ifndef __STARFIVE_TIMER_H__
> +#define __STARFIVE_TIMER_H__
> +
> +/* Bias: Ch0-0x0, Ch1-0x40, Ch2-0x80, and so on. */
> +#define STARFIVE_TIMER_CH_LEN			0x40
> +#define STARFIVE_TIMER_CH_BASE(x)		((STARFIVE_TIMER_CH_##x) * STARFIVE_TIMER_CH_LEN)
> +
> +#define STARFIVE_CLOCK_SOURCE_RATING		200
> +#define STARFIVE_VALID_BITS			32
> +#define STARFIVE_DELAY_US			0
> +#define STARFIVE_TIMEOUT_US			10000
> +#define STARFIVE_CLOCKEVENT_RATING		300
> +#define STARFIVE_TIMER_MAX_TICKS		0xffffffff
> +#define STARFIVE_TIMER_MIN_TICKS		0xf
> +
> +#define STARFIVE_TIMER_JH7110_INT_STATUS	0x00 /* RO[0:4]: Interrupt Status for channel0~4 */
> +#define STARFIVE_TIMER_JH7110_CTL		0x04 /* RW[0]: 0-continuous run, 1-single run */
> +#define STARFIVE_TIMER_JH7110_LOAD		0x08 /* RW: load value to counter */
> +#define STARFIVE_TIMER_JH7110_ENABLE		0x10 /* RW[0]: timer enable register */
> +#define STARFIVE_TIMER_JH7110_RELOAD		0x14 /* RW: write 1 or 0 both reload counter */
> +#define STARFIVE_TIMER_JH7110_VALUE		0x18 /* RO: timer value register */
> +#define STARFIVE_TIMER_JH7110_INT_CLR		0x20 /* RW: timer interrupt clear register */
> +#define STARFIVE_TIMER_JH7110_INT_MASK		0x24 /* RW[0]: timer interrupt mask register */
> +#define STARFIVE_TIMER_JH7110_INT_CLR_AVA_MASK	BIT(1)
> +
> +enum STARFIVE_TIMER_CH {
> +	STARFIVE_TIMER_CH_0 = 0,
> +	STARFIVE_TIMER_CH_1,
> +	STARFIVE_TIMER_CH_2,
> +	STARFIVE_TIMER_CH_3,
> +	STARFIVE_TIMER_CH_4,
> +	STARFIVE_TIMER_CH_5,
> +	STARFIVE_TIMER_CH_6,
> +	STARFIVE_TIMER_CH_7,
> +	STARFIVE_TIMER_CH_MAX
> +};
> +
> +enum STARFIVE_TIMER_INTMASK {
> +	STARFIVE_TIMER_INTMASK_DIS = 0,
> +	STARFIVE_TIMER_INTMASK_ENA = 1
> +};
> +
> +enum STARFIVE_TIMER_MOD {
> +	STARFIVE_TIMER_MOD_CONTIN = 0,
> +	STARFIVE_TIMER_MOD_SINGLE = 1
> +};
> +
> +enum STARFIVE_TIMER_CTL_EN {
> +	STARFIVE_TIMER_DIS = 0,
> +	STARFIVE_TIMER_ENA = 1
> +};
> +
> +struct starfive_timer_chan_base {
> +	/* Resgister */
> +	unsigned int ctrl;
> +	unsigned int load;
> +	unsigned int enable;
> +	unsigned int reload;
> +	unsigned int value;
> +	unsigned int intclr;
> +	unsigned int intmask;
> +
> +	unsigned int channel_num;	/* timer channel numbers */
> +	unsigned int channel_base[];
> +};
> +
> +struct starfive_clkevt {
> +	struct clock_event_device evt;
> +	struct clk *clk;
> +	char name[20];
> +	int irq;
> +	u32 periodic;
> +	u32 rate;
> +	u32 reload_val;
> +	void __iomem *base;
> +	void __iomem *ctrl;
> +	void __iomem *load;
> +	void __iomem *enable;
> +	void __iomem *reload;
> +	void __iomem *value;
> +	void __iomem *intclr;
> +	void __iomem *intmask;
> +};
> +
> +struct starfive_timer_priv {
> +	struct device *dev;
> +	void __iomem *base;
> +	struct starfive_clkevt clkevt[];
> +};
> +
> +#endif /* __STARFIVE_TIMER_H__ */

Hi Daniel and Thomas,

I have submitted patches for Timer driver. Could you please help to review and give your comments?
Thanks.

Best regards,
Xingyu Wu

Powered by blists - more mailing lists