| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230602101313.3557775-3-ardb@kernel.org>
Date: Fri, 2 Jun 2023 12:12:54 +0200
From: Ard Biesheuvel <ardb@...nel.org>
To: linux-efi@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, Ard Biesheuvel <ardb@...nel.org>,
Evgeniy Baskov <baskov@...ras.ru>,
Borislav Petkov <bp@...en8.de>,
Andy Lutomirski <luto@...nel.org>,
Dave Hansen <dave.hansen@...ux.intel.com>,
Ingo Molnar <mingo@...hat.com>,
Peter Zijlstra <peterz@...radead.org>,
Thomas Gleixner <tglx@...utronix.de>,
Alexey Khoroshilov <khoroshilov@...ras.ru>,
Peter Jones <pjones@...hat.com>,
Gerd Hoffmann <kraxel@...hat.com>,
Dave Young <dyoung@...hat.com>,
Mario Limonciello <mario.limonciello@....com>,
Kees Cook <keescook@...omium.org>,
Tom Lendacky <thomas.lendacky@....com>,
"Kirill A . Shutemov" <kirill.shutemov@...ux.intel.com>,
Linus Torvalds <torvalds@...ux-foundation.org>,
Joerg Roedel <jroedel@...e.de>
Subject: [PATCH v4 02/21] x86/efistub: Simplify and clean up handover entry code
Now that the EFI entry code in assembler is only used by the optional
and deprecated EFI handover protocol, and given that the EFI stub C code
no longer returns to it, most of it can simply be dropped.
While at it, clarify the symbol naming, by merging efi_main() and
efi_stub_entry(), making the latter the shared entry point for all
different boot modes that enter via the EFI stub.
The efi32_stub_entry() and efi64_stub_entry() names are referenced
explicitly by the tooling that populates the setup header, so these must
be retained, but can be emitted as aliases of efi_stub_entry() where
appropriate.
Signed-off-by: Ard Biesheuvel <ardb@...nel.org>
---
Documentation/arch/x86/boot.rst | 2 +-
arch/x86/boot/compressed/efi_mixed.S | 22 +++++++++++---------
arch/x86/boot/compressed/head_32.S | 11 ----------
arch/x86/boot/compressed/head_64.S | 12 ++---------
drivers/firmware/efi/libstub/x86-stub.c | 20 ++++++++++++++----
5 files changed, 31 insertions(+), 36 deletions(-)
diff --git a/Documentation/arch/x86/boot.rst b/Documentation/arch/x86/boot.rst
index 33520ecdb37abfda..cdbca15a4fc23833 100644
--- a/Documentation/arch/x86/boot.rst
+++ b/Documentation/arch/x86/boot.rst
@@ -1417,7 +1417,7 @@ execution context provided by the EFI firmware.
The function prototype for the handover entry point looks like this::
- efi_main(void *handle, efi_system_table_t *table, struct boot_params *bp)
+ efi_stub_entry(void *handle, efi_system_table_t *table, struct boot_params *bp)
'handle' is the EFI image handle passed to the boot loader by the EFI
firmware, 'table' is the EFI system table - these are the first two
diff --git a/arch/x86/boot/compressed/efi_mixed.S b/arch/x86/boot/compressed/efi_mixed.S
index 4ca70bf93dc0bdcd..dcc562c8f7f35162 100644
--- a/arch/x86/boot/compressed/efi_mixed.S
+++ b/arch/x86/boot/compressed/efi_mixed.S
@@ -26,8 +26,8 @@
* When booting in 64-bit mode on 32-bit EFI firmware, startup_64_mixed_mode()
* is the first thing that runs after switching to long mode. Depending on
* whether the EFI handover protocol or the compat entry point was used to
- * enter the kernel, it will either branch to the 64-bit EFI handover
- * entrypoint at offset 0x390 in the image, or to the 64-bit EFI PE/COFF
+ * enter the kernel, it will either branch to the common 64-bit EFI stub
+ * entrypoint efi_stub_entry() directly, or via the 64-bit EFI PE/COFF
* entrypoint efi_pe_entry(). In the former case, the bootloader must provide a
* struct bootparams pointer as the third argument, so the presence of such a
* pointer is used to disambiguate.
@@ -37,21 +37,23 @@
* | efi32_pe_entry |---->| | | +-----------+--+
* +------------------+ | | +------+----------------+ |
* | startup_32 |---->| startup_64_mixed_mode | |
- * +------------------+ | | +------+----------------+ V
- * | efi32_stub_entry |---->| | | +------------------+
- * +------------------+ +------------+ +---->| efi64_stub_entry |
- * +-------------+----+
- * +------------+ +----------+ |
- * | startup_64 |<----| efi_main |<--------------+
- * +------------+ +----------+
+ * +------------------+ | | +------+----------------+ |
+ * | efi32_stub_entry |---->| | | |
+ * +------------------+ +------------+ | |
+ * V |
+ * +------------+ +----------------+ |
+ * | startup_64 |<----| efi_stub_entry |<--------+
+ * +------------+ +----------------+
*/
SYM_FUNC_START(startup_64_mixed_mode)
lea efi32_boot_args(%rip), %rdx
mov 0(%rdx), %edi
mov 4(%rdx), %esi
+#ifdef CONFIG_EFI_HANDOVER_PROTOCOL
mov 8(%rdx), %edx // saved bootparams pointer
test %edx, %edx
- jnz efi64_stub_entry
+ jnz efi_stub_entry
+#endif
/*
* efi_pe_entry uses MS calling convention, which requires 32 bytes of
* shadow space on the stack even if all arguments are passed in
diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index 987ae727cf9f0d04..8876ffe30e9a4819 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -150,17 +150,6 @@ SYM_FUNC_START(startup_32)
jmp *%eax
SYM_FUNC_END(startup_32)
-#ifdef CONFIG_EFI_STUB
-SYM_FUNC_START(efi32_stub_entry)
- add $0x4, %esp
- movl 8(%esp), %esi /* save boot_params pointer */
- call efi_main
- /* efi_main returns the possibly relocated address of startup_32 */
- jmp *%eax
-SYM_FUNC_END(efi32_stub_entry)
-SYM_FUNC_ALIAS(efi_stub_entry, efi32_stub_entry)
-#endif
-
.text
SYM_FUNC_START_LOCAL_NOALIGN(.Lrelocated)
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 03c4328a88cbd5d0..71c1f40a7ac067b9 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -523,19 +523,11 @@ trampoline_return:
jmp *%rax
SYM_CODE_END(startup_64)
-#ifdef CONFIG_EFI_STUB
-#ifdef CONFIG_EFI_HANDOVER_PROTOCOL
+#if IS_ENABLED(CONFIG_EFI_MIXED) && IS_ENABLED(CONFIG_EFI_HANDOVER_PROTOCOL)
.org 0x390
-#endif
SYM_FUNC_START(efi64_stub_entry)
- and $~0xf, %rsp /* realign the stack */
- movq %rdx, %rbx /* save boot_params pointer */
- call efi_main
- movq %rbx,%rsi
- leaq rva(startup_64)(%rax), %rax
- jmp *%rax
+ jmp efi_stub_entry
SYM_FUNC_END(efi64_stub_entry)
-SYM_FUNC_ALIAS(efi_stub_entry, efi64_stub_entry)
#endif
.text
diff --git a/drivers/firmware/efi/libstub/x86-stub.c b/drivers/firmware/efi/libstub/x86-stub.c
index 095aaa8b0ee30fb9..d6a376e52cbe1399 100644
--- a/drivers/firmware/efi/libstub/x86-stub.c
+++ b/drivers/firmware/efi/libstub/x86-stub.c
@@ -782,9 +782,9 @@ static void __noreturn enter_kernel(unsigned long kernel_addr,
* On success, we jump to the relocated kernel directly and never return.
* On failure, we exit to the firmware via efi_exit instead of returning.
*/
-asmlinkage unsigned long efi_main(efi_handle_t handle,
- efi_system_table_t *sys_table_arg,
- struct boot_params *boot_params)
+void __noreturn efi_stub_entry(efi_handle_t handle,
+ efi_system_table_t *sys_table_arg,
+ struct boot_params *boot_params)
{
unsigned long bzimage_addr = (unsigned long)startup_32;
unsigned long buffer_start, buffer_end;
@@ -928,7 +928,19 @@ asmlinkage unsigned long efi_main(efi_handle_t handle,
enter_kernel(bzimage_addr, boot_params);
fail:
- efi_err("efi_main() failed!\n");
+ efi_err("efi_stub_entry() failed!\n");
efi_exit(handle, status);
}
+
+#ifdef CONFIG_EFI_HANDOVER_PROTOCOL
+#ifndef CONFIG_EFI_MIXED
+extern __alias(efi_stub_entry)
+void efi32_stub_entry(efi_handle_t handle, efi_system_table_t *sys_table_arg,
+ struct boot_params *boot_params);
+
+extern __alias(efi_stub_entry)
+void efi64_stub_entry(efi_handle_t handle, efi_system_table_t *sys_table_arg,
+ struct boot_params *boot_params);
+#endif
+#endif
--
2.39.2
Powered by blists - more mailing lists