linux-kernel - [PATCH 4/4] MIPS: DTS: qi_lb60: Don't use unit address for regulators

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230604122655.69698-4-paul@crapouillou.net>
Date:   Sun,  4 Jun 2023 14:26:55 +0200
From:   Paul Cercueil <paul@...pouillou.net>
To:     Thomas Bogendoerfer <tsbogend@...ha.franken.de>
Cc:     Paul Burton <paulburton@...nel.org>,
        Siarhei Volkau <lis8215@...il.com>, linux-mips@...r.kernel.org,
        linux-kernel@...r.kernel.org, list@...ndingux.net,
        Paul Cercueil <paul@...pouillou.net>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>, devicetree@...r.kernel.org
Subject: [PATCH 4/4] MIPS: DTS: qi_lb60: Don't use unit address for regulators

The regulators don't have any "reg" property, and therefore shouldn't
use an unit address in their node names.

Signed-off-by: Paul Cercueil <paul@...pouillou.net>
---
Cc: Rob Herring <robh+dt@...nel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc: Conor Dooley <conor+dt@...nel.org>
Cc: devicetree@...r.kernel.org
---
 arch/mips/boot/dts/ingenic/qi_lb60.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/mips/boot/dts/ingenic/qi_lb60.dts b/arch/mips/boot/dts/ingenic/qi_lb60.dts
index ba0218971572..24f987244a12 100644
--- a/arch/mips/boot/dts/ingenic/qi_lb60.dts
+++ b/arch/mips/boot/dts/ingenic/qi_lb60.dts
@@ -27,7 +27,7 @@ chosen {
 		stdout-path = &uart0;
 	};
 
-	vcc: regulator@0 {
+	vcc: regulator-0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc";
 
@@ -36,7 +36,7 @@ vcc: regulator@0 {
 		regulator-always-on;
 	};
 
-	mmc_power: regulator@1 {
+	mmc_power: regulator-1 {
 		compatible = "regulator-fixed";
 		regulator-name = "mmc_vcc";
 		gpio = <&gpd 2 0>;
@@ -45,7 +45,7 @@ mmc_power: regulator@1 {
 		regulator-max-microvolt = <3300000>;
 	};
 
-	amp_supply: regulator@2 {
+	amp_supply: regulator-2 {
 		compatible = "regulator-fixed";
 		regulator-name = "amp_supply";
 		gpio = <&gpd 4 0>;
-- 
2.39.2