linux-kernel - Re: [PATCH net-next 16/30] net: dsa: mt7530: move lowering port 5 RGMII driving to mt7530

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Sun, 4 Jun 2023 10:14:45 +0300
From:   Vladimir Oltean <olteanv@...il.com>
To:     Arınç ÜNAL <arinc.unal@...nc9.com>
Cc:     Sean Wang <sean.wang@...iatek.com>,
        Landen Chao <Landen.Chao@...iatek.com>,
        DENG Qingfang <dqfext@...il.com>,
        Daniel Golle <daniel@...rotopia.org>,
        Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Matthias Brugger <matthias.bgg@...il.com>,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...labora.com>,
        Russell King <linux@...linux.org.uk>,
        Richard van Schagen <richard@...terhints.com>,
        Richard van Schagen <vschagen@...com>,
        Frank Wunderlich <frank-w@...lic-files.de>,
        Bartel Eerdekens <bartel.eerdekens@...stell8.be>,
        erkin.bozoglu@...ont.com, mithat.guner@...ont.com,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-mediatek@...ts.infradead.org
Subject: Re: [PATCH net-next 16/30] net: dsa: mt7530: move lowering port 5
 RGMII driving to mt7530_setup()

On Sun, Jun 04, 2023 at 10:05:44AM +0300, Arınç ÜNAL wrote:
> It wouldn't. I'll drop this patch, thanks. For reference, PMCR_TX_EN (bit
> 14) for port 5 is also set in the case of PHY muxing with this code on
> mt7530_setup_port5() which doesn't use phylink.
> 
> 		/* Setup the MAC by default for the cpu port */
> 		mt7530_write(priv, MT7530_PMCR_P(5), 0x56300);
> 
> 0x56300 = 0101 0110 0011 0000 0000
> 
> Maybe I should make a patch to use the definitions on mt7530.h for this?
> 
> Arınç

Yes, I don't believe magic numbers make things particularly obvious for
other driver writers, they should be avoided if possible.