| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <24803a8c-098d-dfae-bb99-0feb9204e188@quicinc.com>
Date: Mon, 5 Jun 2023 11:08:17 +0530
From: Manikanta Mylavarapu <quic_mmanikan@...cinc.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
<agross@...nel.org>, <andersson@...nel.org>,
<konrad.dybcio@...aro.org>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
<jassisinghbrar@...il.com>, <mathieu.poirier@...aro.org>,
<mturquette@...libre.com>, <sboyd@...nel.org>,
<quic_eberman@...cinc.com>, <quic_mojha@...cinc.com>,
<kvalo@...nel.org>, <loic.poulain@...aro.org>,
<linux-arm-msm@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-remoteproc@...r.kernel.org>,
<linux-clk@...r.kernel.org>
CC: <quic_srichara@...cinc.com>, <quic_sjaganat@...cinc.com>,
<quic_kathirav@...cinc.com>, <quic_anusha@...cinc.com>,
<quic_poovendh@...cinc.com>, <quic_varada@...cinc.com>,
<quic_devipriy@...cinc.com>
Subject: Re: [PATCH V2 11/13] arm64: dtsi: qcom: ipq5018: enable nodes
required for multipd
On 6/5/2023 11:05 AM, Manikanta Mylavarapu wrote:
>
>
> On 5/30/2023 4:35 PM, Krzysztof Kozlowski wrote:
>> On 22/05/2023 00:28, Manikanta Mylavarapu wrote:
>>> Enable nodes required for multipd remoteproc bring up
>>
>> Please use subject prefixes matching the subsystem. You can get them for
>> example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
>> your patch is touching.
>>
>> It is "dts". Not "dtsi".
>>
> Sure, I will update to 'dtsi'.
>
Sorry please discard my previous reply.
I will update to dts.
>>>
>>> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@...cinc.com>
>>> ---
>>> Changes in V2:
>>> - Corrected syntax like alignmnet and kept nodes in sorted order.
>>> - Covered entire TCSR region.
>>> - Added 'firmware-name' property.
>>>
>>> arch/arm64/boot/dts/qcom/ipq5018.dtsi | 140 ++++++++++++++++++++++++++
>>> 1 file changed, 140 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
>>> b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
>>> index 9f13d2dcdfd5..3772d54d89e4 100644
>>> --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
>>> @@ -85,6 +85,18 @@
>>> reg = <0x0 0x4ac00000 0x0 0x200000>;
>>> no-map;
>>> };
>>> +
>>> + q6_region: wcnss@...00000 {
>>> + reg = <0x0 0x4b000000 0x0 0x1700000>;
>>> + no-map;
>>> + };
>>> +
>>> + smem@...00000 {
>>> + compatible = "qcom,smem";
>>> + reg = <0x0 0x4ab00000 0x0 0x100000>;
>>> + hwlocks = <&tcsr_mutex 0>;
>>> + no-map;
>>> + };
>>> };
>>>
>>> soc: soc@0 {
>>> @@ -128,6 +140,12 @@
>>> #power-domain-cells = <1>;
>>> };
>>>
>>> + tcsr_mutex: hwlock@...5000 {
>>> + compatible = "qcom,tcsr-mutex";
>>> + reg = <0x01905000 0x20000>;
>>> + #hwlock-cells = <1>;
>>> + };
>>> +
>>> sdhc_1: mmc@...4000 {
>>> compatible = "qcom,ipq5018-sdhci", "qcom,sdhci-msm-v5";
>>> reg = <0x7804000 0x1000>;
>>> @@ -181,6 +199,14 @@
>>> };
>>> };
>>>
>>> + apcs_glb: mailbox@...1000 {
>>> + compatible = "qcom,ipq5018-apcs-apps-global",
>>> + "qcom,ipq6018-apcs-apps-global";
>>> + reg = <0x0b111000 0x1000>;
>>> + #clock-cells = <1>;
>>> + #mbox-cells = <1>;
>>> + };
>>> +
>>> timer@...0000 {
>>> compatible = "arm,armv7-timer-mem";
>>> reg = <0x0b120000 0x1000>;
>>> @@ -238,6 +264,96 @@
>>> status = "disabled";
>>> };
>>> };
>>> +
>>> + q6v5_wcss: remoteproc@...0000 {
>>> + compatible = "qcom,ipq5018-q6-mpd";
>>> + reg = <0x0cd00000 0x4040>;
>>> + firmware-name = "IPQ5018/q6_fw.mdt",
>>> + "IPQ5018/m3_fw.mdt",
>>> + "qcn6122/m3_fw.mdt";
>>> + interrupts-extended = <&intc GIC_SPI 291
>>> IRQ_TYPE_EDGE_RISING>,
>>> + <&wcss_smp2p_in 0 0>,
>>> + <&wcss_smp2p_in 1 0>,
>>> + <&wcss_smp2p_in 2 0>,
>>> + <&wcss_smp2p_in 3 0>;
>>> + interrupt-names = "wdog",
>>> + "fatal",
>>> + "ready",
>>> + "handover",
>>> + "stop-ack";
>>> +
>>> + qcom,smem-states = <&wcss_smp2p_out 0>,
>>> + <&wcss_smp2p_out 1>;
>>> + qcom,smem-state-names = "shutdown",
>>> + "stop";
>>> + memory-region = <&q6_region>;
>>> +
>>> + glink-edge {
>>> + interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
>>> + label = "rtr";
>>> + qcom,remote-pid = <1>;
>>> + mboxes = <&apcs_glb 8>;
>>> + };
>>> +
>>> + pd-1 {
>>> + compatible = "qcom,ipq5018-wcss-ahb-mpd";
>>> + firmware-name = "IPQ5018/q6_fw.mdt";
>>> + interrupts-extended = <&wcss_smp2p_in 8 0>,
>>> + <&wcss_smp2p_in 9 0>,
>>> + <&wcss_smp2p_in 12 0>,
>>> + <&wcss_smp2p_in 11 0>;
>>
>> What "0" stands for?
>>
> 0 means IRQ_NONE. These are software interrupts (register write),
> so we have configured to 0. I will replace 0 with IRQ_NONE.
>
> Thanks & Regards,
> Manikanta.
>
>>> + interrupt-names = "fatal",
>>> + "ready",
>> Best regards,
>> Krzysztof
>>
Powered by blists - more mailing lists