| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230531-rpm-rproc-v1-13-e0a3b6de1f14@gerhold.net>
Date: Mon, 05 Jun 2023 09:08:29 +0200
From: Stephan Gerhold <stephan@...hold.net>
To: Bjorn Andersson <andersson@...nel.org>
Cc: Andy Gross <agross@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Mathieu Poirier <mathieu.poirier@...aro.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-remoteproc@...r.kernel.org,
Stephan Gerhold <stephan@...hold.net>
Subject: [PATCH 13/14] ARM: dts: qcom: Add rpm-proc node for SMD platforms
Rather than having the RPM SMD channels as the only child of a dummy
SMD node, switch to representing the RPM as remoteproc like all the
other remoteprocs (WCNSS, modem DSP).
This allows assigning additional subdevices to it like the MPM
interrupt-controller or rpm-master-stats.
Signed-off-by: Stephan Gerhold <stephan@...hold.net>
---
arch/arm/boot/dts/qcom-apq8084.dtsi | 6 ++---
arch/arm/boot/dts/qcom-msm8226.dtsi | 38 ++++++++++++++++----------------
arch/arm/boot/dts/qcom-msm8974.dtsi | 44 ++++++++++++++++++-------------------
3 files changed, 44 insertions(+), 44 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index 8f178bc87e1d..b24e3bd89ae7 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -784,10 +784,10 @@ spmi_bus: spmi@...cf000 {
};
};
- smd {
- compatible = "qcom,smd";
+ rpm: remoteproc-rpm {
+ compatible = "qcom,apq8084-rpm-proc", "qcom,rpm-proc";
- rpm {
+ smd-edge {
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 0>;
qcom,smd-edge = <15>;
diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi
index a3a9162e9c28..38867a9e07a0 100644
--- a/arch/arm/boot/dts/qcom-msm8226.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8226.dtsi
@@ -53,26 +53,10 @@ pmu {
IRQ_TYPE_LEVEL_HIGH)>;
};
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- smem_region: smem@...0000 {
- reg = <0x3000000 0x100000>;
- no-map;
- };
-
- adsp_region: adsp@...0000 {
- reg = <0x0dc00000 0x1900000>;
- no-map;
- };
- };
-
- smd {
- compatible = "qcom,smd";
+ rpm: remoteproc-rpm {
+ compatible = "qcom,msm8226-rpm-proc", "qcom,rpm-proc";
- rpm {
+ smd-edge {
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 0>;
qcom,smd-edge = <15>;
@@ -120,6 +104,22 @@ rpmpd_opp_super_turbo: opp6 {
};
};
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ smem_region: smem@...0000 {
+ reg = <0x3000000 0x100000>;
+ no-map;
+ };
+
+ adsp_region: adsp@...0000 {
+ reg = <0x0dc00000 0x1900000>;
+ no-map;
+ };
+ };
+
smem {
compatible = "qcom,smem";
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 58e144957c5d..edffd3afec2a 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -113,6 +113,28 @@ pmu {
interrupts = <GIC_PPI 7 0xf04>;
};
+ rpm: remoteproc-rpm {
+ compatible = "qcom,msm8974-rpm-proc", "qcom,rpm-proc";
+
+ smd-edge {
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,ipc = <&apcs 8 0>;
+ qcom,smd-edge = <15>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-msm8974";
+ qcom,smd-channels = "rpm_requests";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc";
+ #clock-cells = <1>;
+ clocks = <&xo_board>;
+ clock-names = "xo";
+ };
+ };
+ };
+ };
+
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
@@ -293,28 +315,6 @@ wcnss_smsm: wcnss@7 {
};
};
- smd {
- compatible = "qcom,smd";
-
- rpm {
- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
- qcom,ipc = <&apcs 8 0>;
- qcom,smd-edge = <15>;
-
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-msm8974";
- qcom,smd-channels = "rpm_requests";
-
- rpmcc: clock-controller {
- compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc";
- #clock-cells = <1>;
- clocks = <&xo_board>;
- clock-names = "xo";
- };
- };
- };
- };
-
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
--
2.40.1
Powered by blists - more mailing lists