| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230531-rpm-rproc-v1-11-e0a3b6de1f14@gerhold.net>
Date: Mon, 05 Jun 2023 09:08:27 +0200
From: Stephan Gerhold <stephan@...hold.net>
To: Bjorn Andersson <andersson@...nel.org>
Cc: Andy Gross <agross@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Mathieu Poirier <mathieu.poirier@...aro.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-remoteproc@...r.kernel.org,
Stephan Gerhold <stephan@...hold.net>
Subject: [PATCH 11/14] arm64: dts: qcom: Add rpm-proc node for SMD
platforms
Rather than having the RPM SMD channels as the only child of a dummy
SMD node, switch to representing the RPM as remoteproc like all the
other remoteprocs (WCNSS, modem DSP).
This allows assigning additional subdevices to it like the MPM
interrupt-controller or rpm-master-stats.
Signed-off-by: Stephan Gerhold <stephan@...hold.net>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 6 +-
arch/arm64/boot/dts/qcom/msm8939.dtsi | 112 ++++++++++++-------------
arch/arm64/boot/dts/qcom/msm8953.dtsi | 136 +++++++++++++++---------------
arch/arm64/boot/dts/qcom/msm8976.dtsi | 152 +++++++++++++++++-----------------
arch/arm64/boot/dts/qcom/msm8994.dtsi | 99 +++++++++++-----------
5 files changed, 253 insertions(+), 252 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 9494b6512d87..667748612d3e 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -282,10 +282,10 @@ CLUSTER_PD: power-domain-cluster {
};
};
- smd {
- compatible = "qcom,smd";
+ rpm: remoteproc-rpm {
+ compatible = "qcom,msm8916-rpm-proc", "qcom,rpm-proc";
- rpm {
+ smd-edge {
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 0>;
qcom,smd-edge = <15>;
diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi
index 0d9f8b951b66..f11d522586eb 100644
--- a/arch/arm64/boot/dts/qcom/msm8939.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi
@@ -240,6 +240,62 @@ pmu {
interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
};
+ rpm: remoteproc-rpm {
+ compatible = "qcom,msm8936-rpm-proc", "qcom,rpm-proc";
+
+ smd-edge {
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,ipc = <&apcs1_mbox 8 0>;
+ qcom,smd-edge = <15>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-msm8936";
+ qcom,smd-channels = "rpm_requests";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-msm8936", "qcom,rpmcc";
+ #clock-cells = <1>;
+ clock-names = "xo";
+ clocks = <&xo_board>;
+ };
+
+ rpmpd: power-controller {
+ compatible = "qcom,msm8939-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp_ret: opp1 {
+ opp-level = <1>;
+ };
+
+ rpmpd_opp_svs_krait: opp2 {
+ opp-level = <2>;
+ };
+
+ rpmpd_opp_svs_soc: opp3 {
+ opp-level = <3>;
+ };
+
+ rpmpd_opp_nom: opp4 {
+ opp-level = <4>;
+ };
+
+ rpmpd_opp_turbo: opp5 {
+ opp-level = <5>;
+ };
+
+ rpmpd_opp_super_turbo: opp6 {
+ opp-level = <6>;
+ };
+ };
+ };
+ };
+ };
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -308,62 +364,6 @@ mba_mem: mba@...00000 {
};
};
- smd {
- compatible = "qcom,smd";
-
- rpm {
- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
- qcom,ipc = <&apcs1_mbox 8 0>;
- qcom,smd-edge = <15>;
-
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-msm8936";
- qcom,smd-channels = "rpm_requests";
-
- rpmcc: clock-controller {
- compatible = "qcom,rpmcc-msm8936", "qcom,rpmcc";
- #clock-cells = <1>;
- clock-names = "xo";
- clocks = <&xo_board>;
- };
-
- rpmpd: power-controller {
- compatible = "qcom,msm8939-rpmpd";
- #power-domain-cells = <1>;
- operating-points-v2 = <&rpmpd_opp_table>;
-
- rpmpd_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- rpmpd_opp_ret: opp1 {
- opp-level = <1>;
- };
-
- rpmpd_opp_svs_krait: opp2 {
- opp-level = <2>;
- };
-
- rpmpd_opp_svs_soc: opp3 {
- opp-level = <3>;
- };
-
- rpmpd_opp_nom: opp4 {
- opp-level = <4>;
- };
-
- rpmpd_opp_turbo: opp5 {
- opp-level = <5>;
- };
-
- rpmpd_opp_super_turbo: opp6 {
- opp-level = <6>;
- };
- };
- };
- };
- };
- };
-
smp2p-hexagon {
compatible = "qcom,smp2p";
qcom,smem = <435>, <428>;
diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index 7d193a467819..4b2f02850a10 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -190,6 +190,74 @@ psci {
method = "smc";
};
+ rpm: remoteproc-rpm {
+ compatible = "qcom,msm8953-rpm-proc", "qcom,rpm-proc";
+
+ smd-edge {
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,ipc = <&apcs 8 0>;
+ qcom,smd-edge = <15>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-msm8953";
+ qcom,smd-channels = "rpm_requests";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-msm8953", "qcom,rpmcc";
+ clocks = <&xo_board>;
+ clock-names = "xo";
+ #clock-cells = <1>;
+ };
+
+ rpmpd: power-controller {
+ compatible = "qcom,msm8953-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp_ret: opp1 {
+ opp-level = <RPM_SMD_LEVEL_RETENTION>;
+ };
+
+ rpmpd_opp_ret_plus: opp2 {
+ opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+ };
+
+ rpmpd_opp_min_svs: opp3 {
+ opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+ };
+
+ rpmpd_opp_low_svs: opp4 {
+ opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+ };
+
+ rpmpd_opp_svs: opp5 {
+ opp-level = <RPM_SMD_LEVEL_SVS>;
+ };
+
+ rpmpd_opp_svs_plus: opp6 {
+ opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+ };
+
+ rpmpd_opp_nom: opp7 {
+ opp-level = <RPM_SMD_LEVEL_NOM>;
+ };
+
+ rpmpd_opp_nom_plus: opp8 {
+ opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+ };
+
+ rpmpd_opp_turbo: opp9 {
+ opp-level = <RPM_SMD_LEVEL_TURBO>;
+ };
+ };
+ };
+ };
+ };
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -263,74 +331,6 @@ rmtfs@...00000 {
};
};
- smd {
- compatible = "qcom,smd";
-
- rpm {
- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
- qcom,ipc = <&apcs 8 0>;
- qcom,smd-edge = <15>;
-
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-msm8953";
- qcom,smd-channels = "rpm_requests";
-
- rpmcc: clock-controller {
- compatible = "qcom,rpmcc-msm8953", "qcom,rpmcc";
- clocks = <&xo_board>;
- clock-names = "xo";
- #clock-cells = <1>;
- };
-
- rpmpd: power-controller {
- compatible = "qcom,msm8953-rpmpd";
- #power-domain-cells = <1>;
- operating-points-v2 = <&rpmpd_opp_table>;
-
- rpmpd_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- rpmpd_opp_ret: opp1 {
- opp-level = <RPM_SMD_LEVEL_RETENTION>;
- };
-
- rpmpd_opp_ret_plus: opp2 {
- opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
- };
-
- rpmpd_opp_min_svs: opp3 {
- opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
- };
-
- rpmpd_opp_low_svs: opp4 {
- opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
- };
-
- rpmpd_opp_svs: opp5 {
- opp-level = <RPM_SMD_LEVEL_SVS>;
- };
-
- rpmpd_opp_svs_plus: opp6 {
- opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
- };
-
- rpmpd_opp_nom: opp7 {
- opp-level = <RPM_SMD_LEVEL_NOM>;
- };
-
- rpmpd_opp_nom_plus: opp8 {
- opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
- };
-
- rpmpd_opp_turbo: opp9 {
- opp-level = <RPM_SMD_LEVEL_TURBO>;
- };
- };
- };
- };
- };
- };
-
smp2p-adsp {
compatible = "qcom,smp2p";
qcom,smem = <443>, <429>;
diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi
index 753b9a2105ed..6f856562923f 100644
--- a/arch/arm64/boot/dts/qcom/msm8976.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi
@@ -232,6 +232,82 @@ psci {
method = "smc";
};
+ rpm: remoteproc-rpm {
+ compatible = "qcom,msm8976-rpm-proc", "qcom,rpm-proc";
+
+ smd-edge {
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,ipc = <&apcs 8 0>;
+ qcom,smd-edge = <15>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-msm8976";
+ qcom,smd-channels = "rpm_requests";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-msm8976", "qcom,rpmcc";
+ clocks = <&xo_board>;
+ clock-names = "xo";
+ #clock-cells = <1>;
+ };
+
+ rpmpd: power-controller {
+ compatible = "qcom,msm8976-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp_ret: opp1 {
+ opp-level = <RPM_SMD_LEVEL_RETENTION>;
+ };
+
+ rpmpd_opp_ret_plus: opp2 {
+ opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+ };
+
+ rpmpd_opp_min_svs: opp3 {
+ opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+ };
+
+ rpmpd_opp_low_svs: opp4 {
+ opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+ };
+
+ rpmpd_opp_svs: opp5 {
+ opp-level = <RPM_SMD_LEVEL_SVS>;
+ };
+
+ rpmpd_opp_svs_plus: opp6 {
+ opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+ };
+
+ rpmpd_opp_nom: opp7 {
+ opp-level = <RPM_SMD_LEVEL_NOM>;
+ };
+
+ rpmpd_opp_nom_plus: opp8 {
+ opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+ };
+
+ rpmpd_opp_turbo: opp9 {
+ opp-level = <RPM_SMD_LEVEL_TURBO>;
+ };
+
+ rpmpd_opp_turbo_no_cpr: opp10 {
+ opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+ };
+
+ rpmpd_opp_turbo_high: opp111 {
+ opp-level = <RPM_SMD_LEVEL_TURBO_HIGH>;
+ };
+ };
+ };
+ };
+ };
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -346,82 +422,6 @@ wcnss_smp2p_in: slave-kernel {
};
};
- smd {
- compatible = "qcom,smd";
-
- rpm {
- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
- qcom,ipc = <&apcs 8 0>;
- qcom,smd-edge = <15>;
-
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-msm8976";
- qcom,smd-channels = "rpm_requests";
-
- rpmcc: clock-controller {
- compatible = "qcom,rpmcc-msm8976", "qcom,rpmcc";
- clocks = <&xo_board>;
- clock-names = "xo";
- #clock-cells = <1>;
- };
-
- rpmpd: power-controller {
- compatible = "qcom,msm8976-rpmpd";
- #power-domain-cells = <1>;
- operating-points-v2 = <&rpmpd_opp_table>;
-
- rpmpd_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- rpmpd_opp_ret: opp1 {
- opp-level = <RPM_SMD_LEVEL_RETENTION>;
- };
-
- rpmpd_opp_ret_plus: opp2 {
- opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
- };
-
- rpmpd_opp_min_svs: opp3 {
- opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
- };
-
- rpmpd_opp_low_svs: opp4 {
- opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
- };
-
- rpmpd_opp_svs: opp5 {
- opp-level = <RPM_SMD_LEVEL_SVS>;
- };
-
- rpmpd_opp_svs_plus: opp6 {
- opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
- };
-
- rpmpd_opp_nom: opp7 {
- opp-level = <RPM_SMD_LEVEL_NOM>;
- };
-
- rpmpd_opp_nom_plus: opp8 {
- opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
- };
-
- rpmpd_opp_turbo: opp9 {
- opp-level = <RPM_SMD_LEVEL_TURBO>;
- };
-
- rpmpd_opp_turbo_no_cpr: opp10 {
- opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
- };
-
- rpmpd_opp_turbo_high: opp111 {
- opp-level = <RPM_SMD_LEVEL_TURBO_HIGH>;
- };
- };
- };
- };
- };
- };
-
smsm {
compatible = "qcom,smsm";
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index 5a7923d7c62a..6168d0aeff57 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -178,6 +178,56 @@ psci {
method = "hvc";
};
+ rpm: remoteproc-rpm {
+ compatible = "qcom,msm8994-rpm-proc", "qcom,rpm-proc";
+
+ smd-edge {
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,ipc = <&apcs 8 0>;
+ qcom,smd-edge = <15>;
+ qcom,remote-pid = <6>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-msm8994";
+ qcom,smd-channels = "rpm_requests";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-msm8994", "qcom,rpmcc";
+ #clock-cells = <1>;
+ };
+
+ rpmpd: power-controller {
+ compatible = "qcom,msm8994-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp_ret: opp1 {
+ opp-level = <1>;
+ };
+ rpmpd_opp_svs_krait: opp2 {
+ opp-level = <2>;
+ };
+ rpmpd_opp_svs_soc: opp3 {
+ opp-level = <3>;
+ };
+ rpmpd_opp_nom: opp4 {
+ opp-level = <4>;
+ };
+ rpmpd_opp_turbo: opp5 {
+ opp-level = <5>;
+ };
+ rpmpd_opp_super_turbo: opp6 {
+ opp-level = <6>;
+ };
+ };
+ };
+ };
+ };
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -237,55 +287,6 @@ reserved@...0000 {
};
};
- smd {
- compatible = "qcom,smd";
- rpm {
- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
- qcom,ipc = <&apcs 8 0>;
- qcom,smd-edge = <15>;
- qcom,remote-pid = <6>;
-
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-msm8994";
- qcom,smd-channels = "rpm_requests";
-
- rpmcc: clock-controller {
- compatible = "qcom,rpmcc-msm8994", "qcom,rpmcc";
- #clock-cells = <1>;
- };
-
- rpmpd: power-controller {
- compatible = "qcom,msm8994-rpmpd";
- #power-domain-cells = <1>;
- operating-points-v2 = <&rpmpd_opp_table>;
-
- rpmpd_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- rpmpd_opp_ret: opp1 {
- opp-level = <1>;
- };
- rpmpd_opp_svs_krait: opp2 {
- opp-level = <2>;
- };
- rpmpd_opp_svs_soc: opp3 {
- opp-level = <3>;
- };
- rpmpd_opp_nom: opp4 {
- opp-level = <4>;
- };
- rpmpd_opp_turbo: opp5 {
- opp-level = <5>;
- };
- rpmpd_opp_super_turbo: opp6 {
- opp-level = <6>;
- };
- };
- };
- };
- };
- };
-
smem {
compatible = "qcom,smem";
memory-region = <&smem_mem>;
--
2.40.1
Powered by blists - more mailing lists