linux-kernel - Re: [PATCH 05/14] dt-bindings: remoteproc: Add Qualcomm RPM processor/subsystem

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <168595403632.208907.7805006523202767813.robh@kernel.org>
Date:   Mon, 05 Jun 2023 02:33:58 -0600
From:   Rob Herring <robh@...nel.org>
To:     Stephan Gerhold <stephan@...hold.net>
Cc:     linux-arm-msm@...r.kernel.org, Rob Herring <robh+dt@...nel.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Mathieu Poirier <mathieu.poirier@...aro.org>,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        Bjorn Andersson <andersson@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        Andy Gross <agross@...nel.org>,
        linux-remoteproc@...r.kernel.org
Subject: Re: [PATCH 05/14] dt-bindings: remoteproc: Add Qualcomm RPM
 processor/subsystem


On Mon, 05 Jun 2023 09:08:21 +0200, Stephan Gerhold wrote:
> On Qualcomm platforms, most subsystems (e.g. audio/modem DSP) are
> described as remote processors in the device tree, with a dedicated
> node where properties and services related to them can be described.
> 
> The Resource Power Manager (RPM) is also such a subsystem, with a
> remote processor that is running a special firmware. Unfortunately,
> the RPM never got a dedicated node representing it properly in the
> device tree. Most of the RPM services are described below a top-level
> /smd or /rpm-glink node.
> 
> However, SMD/GLINK is just one of the communication channels to the RPM
> firmware. For example, the MPM interrupt functionality provided by the
> RPM does not use SMD/GLINK but writes directly to a special memory
> region allocated by the RPM firmware in combination with a mailbox.
> Currently there is no good place in the device tree to describe this
> functionality. It doesn't belong below SMD/GLINK but it's not an
> independent top-level device either.
> 
> Introduce a new "qcom,rpm-proc" compatible that allows describing the
> RPM as a remote processor/subsystem like all others. The SMD/GLINK node
> is moved to a "smd-edge"/"glink-edge" subnode consistent with other
> existing bindings. Additional subnodes (e.g. interrupt-controller for
> MPM, rpm-master-stats) can be also added there.
> 
> Signed-off-by: Stephan Gerhold <stephan@...hold.net>
> ---
>  .../bindings/remoteproc/qcom,rpm-proc.yaml         | 125 +++++++++++++++++++++
>  1 file changed, 125 insertions(+)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
./Documentation/devicetree/bindings/remoteproc/qcom,rpm-proc.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/soc/qcom/qcom,rpm-master-stats.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230531-rpm-rproc-v1-5-e0a3b6de1f14@gerhold.net

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.