linux-kernel - [PATCH v3] fpga: zynq-fpga: Ensure proper xCAP interface switch

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230605115433.186087-1-nava.kishore.manne@amd.com>
Date:   Mon, 5 Jun 2023 17:24:33 +0530
From:   Nava kishore Manne <nava.kishore.manne@....com>
To:     <mdf@...nel.org>, <hao.wu@...el.com>, <yilun.xu@...el.com>,
        <trix@...hat.com>, <michal.simek@....com>,
        <linux-fpga@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>
CC:     Alfonso Rodriguez <alfonso.rodriguezm@....es>
Subject: [PATCH v3] fpga: zynq-fpga: Ensure proper xCAP interface switch

From: Alfonso Rodriguez <alfonso.rodriguezm@....es>

The Zynq platform has PCAP, ICAP and JTAG interfaces for configuring
programmable logic (PL). The existing driver implementation uses the
PCAP interface to configure the PL. Before switching the PL configuration
interface from PCAP to ICAP make sure that all outstanding Transactions
relevant to the PL configuration should be completed by the PCAP interface
otherwise it may lead to PL configuration issues.

This patch provides a required fix to ensure that all existing PL
transactions are completed before switching from PCAP to ICAP.

For detailed information relevant to PL configuration interfaces refer
Zynq 7000 TRM (section 6.5.1).
Link: https://docs.xilinx.com/v/u/en-US/ug585-Zynq-7000-TRM

Signed-off-by: Alfonso Rodriguez <alfonso.rodriguezm@....es>
Signed-off-by: Nava kishore Manne <nava.kishore.manne@....com>
---
Changes for v3:
              - Fixed some minor code alignment issues.

Changes for v2:
              - Updated commit message and added Doc link as suggested by Yilun.
 
 drivers/fpga/zynq-fpga.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/fpga/zynq-fpga.c b/drivers/fpga/zynq-fpga.c
index ae0da361e6c6..f8214cae9b6e 100644
--- a/drivers/fpga/zynq-fpga.c
+++ b/drivers/fpga/zynq-fpga.c
@@ -493,15 +493,15 @@ static int zynq_fpga_ops_write_complete(struct fpga_manager *mgr,
 	if (err)
 		return err;
 
-	/* Release 'PR' control back to the ICAP */
-	zynq_fpga_write(priv, CTRL_OFFSET,
-		zynq_fpga_read(priv, CTRL_OFFSET) & ~CTRL_PCAP_PR_MASK);
-
 	err = zynq_fpga_poll_timeout(priv, INT_STS_OFFSET, intr_status,
 				     intr_status & IXR_PCFG_DONE_MASK,
 				     INIT_POLL_DELAY,
 				     INIT_POLL_TIMEOUT);
 
+	/* Release 'PR' control back to the ICAP */
+	zynq_fpga_write(priv, CTRL_OFFSET,
+			zynq_fpga_read(priv, CTRL_OFFSET) & ~CTRL_PCAP_PR_MASK);
+
 	clk_disable(priv->clk);
 
 	if (err)
-- 
2.25.1