[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230605154010.49611-2-detlev.casanova@collabora.com>
Date: Mon, 5 Jun 2023 11:40:08 -0400
From: Detlev Casanova <detlev.casanova@...labora.com>
To: linux-kernel@...r.kernel.org
Cc: Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
"David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Florian Fainelli <f.fainelli@...il.com>,
netdev@...r.kernel.org, devicetree@...r.kernel.org,
Detlev Casanova <detlev.casanova@...labora.com>,
Florian Fainelli <florian.fainelli@...adcom.com>
Subject: [PATCH v4 1/3] net: phy: realtek: Add optional external PHY clock
In some cases, the PHY can use an external clock source instead of a
crystal.
Add an optional clock in the phy node to make sure that the clock source
is enabled, if specified, before probing.
Reviewed-by: Florian Fainelli <florian.fainelli@...adcom.com>
Reviewed-by: Andrew Lunn <andrew@...n.ch>
Signed-off-by: Detlev Casanova <detlev.casanova@...labora.com>
---
drivers/net/phy/realtek.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 3d99fd6664d7..b13dd0b3c99e 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -12,6 +12,7 @@
#include <linux/phy.h>
#include <linux/module.h>
#include <linux/delay.h>
+#include <linux/clk.h>
#define RTL821x_PHYSR 0x11
#define RTL821x_PHYSR_DUPLEX BIT(13)
@@ -80,6 +81,7 @@ struct rtl821x_priv {
u16 phycr1;
u16 phycr2;
bool has_phycr2;
+ struct clk *clk;
};
static int rtl821x_read_page(struct phy_device *phydev)
@@ -103,6 +105,11 @@ static int rtl821x_probe(struct phy_device *phydev)
if (!priv)
return -ENOMEM;
+ priv->clk = devm_clk_get_optional_enabled(dev, NULL);
+ if (IS_ERR(priv->clk))
+ return dev_err_probe(dev, PTR_ERR(priv->clk),
+ "failed to get phy clock\n");
+
ret = phy_read_paged(phydev, 0xa43, RTL8211F_PHYCR1);
if (ret < 0)
return ret;
--
2.39.3
Powered by blists - more mailing lists