[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230605154523.11799-1-andriy.shevchenko@linux.intel.com>
Date: Mon, 5 Jun 2023 18:45:22 +0300
From: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Mika Westerberg <mika.westerberg@...ux.intel.com>,
Andy Shevchenko <andy@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>
Subject: [PATCH v1 1/2] pinctrl: moorefield: Fix open-drain pin mode configuration
Currently the pin may not be configured as open-drain in some
cases because the argument may be 0 for the boolean types of
the pin configurations. Fix this by ignoring the argument.
With that, allow to actually restore pin to the push-pull mode.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
---
drivers/pinctrl/intel/pinctrl-moorefield.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/pinctrl/intel/pinctrl-moorefield.c b/drivers/pinctrl/intel/pinctrl-moorefield.c
index 3c9a8484b442..7656a5e20919 100644
--- a/drivers/pinctrl/intel/pinctrl-moorefield.c
+++ b/drivers/pinctrl/intel/pinctrl-moorefield.c
@@ -661,6 +661,11 @@ static int mofld_config_get(struct pinctrl_dev *pctldev, unsigned int pin,
break;
+ case PIN_CONFIG_DRIVE_PUSH_PULL:
+ if (value & BUFCFG_OD_EN)
+ return -EINVAL;
+ break;
+
case PIN_CONFIG_DRIVE_OPEN_DRAIN:
if (!(value & BUFCFG_OD_EN))
return -EINVAL;
@@ -734,10 +739,14 @@ static int mofld_config_set_pin(struct mofld_pinctrl *mp, unsigned int pin,
break;
+ case PIN_CONFIG_DRIVE_PUSH_PULL:
+ mask |= BUFCFG_OD_EN;
+ bits &= ~BUFCFG_OD_EN;
+ break;
+
case PIN_CONFIG_DRIVE_OPEN_DRAIN:
mask |= BUFCFG_OD_EN;
- if (arg)
- bits |= BUFCFG_OD_EN;
+ bits |= BUFCFG_OD_EN;
break;
case PIN_CONFIG_SLEW_RATE:
@@ -769,6 +778,7 @@ static int mofld_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
case PIN_CONFIG_BIAS_DISABLE:
case PIN_CONFIG_BIAS_PULL_UP:
case PIN_CONFIG_BIAS_PULL_DOWN:
+ case PIN_CONFIG_DRIVE_PUSH_PULL:
case PIN_CONFIG_DRIVE_OPEN_DRAIN:
case PIN_CONFIG_SLEW_RATE:
ret = mofld_config_set_pin(mp, pin, configs[i]);
--
2.40.0.1.gaa8946217a0b
Powered by blists - more mailing lists