[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAD=FV=U9xwxC4+wDYFMSoLWaj8vaLH_jettZ=nxEZP+1tNk=oA@mail.gmail.com>
Date: Tue, 6 Jun 2023 16:34:12 -0700
From: Doug Anderson <dianders@...omium.org>
To: Amit Pundir <amit.pundir@...aro.org>
Cc: Mark Brown <broonie@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Andy Gross <agross@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Caleb Connolly <caleb.connolly@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
regressions <regressions@...ts.linux.dev>,
linux-arm-msm <linux-arm-msm@...r.kernel.org>,
dt <devicetree@...r.kernel.org>,
lkml <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] arm64: dts: qcom: sdm845-db845c: Move LVS regulator nodes up
Hi,
On Fri, Jun 2, 2023 at 9:12 AM Amit Pundir <amit.pundir@...aro.org> wrote:
>
> Move lvs1 and lvs2 regulator nodes up in the rpmh-regulators
> list to workaround a boot regression uncovered by the upstream
> commit ad44ac082fdf ("regulator: qcom-rpmh: Revert "regulator:
> qcom-rpmh: Use PROBE_FORCE_SYNCHRONOUS"").
>
> Without this fix DB845c fail to boot at times because one of the
> lvs1 or lvs2 regulators fail to turn ON in time.
>
> Link: https://lore.kernel.org/all/CAMi1Hd1avQDcDQf137m2auz2znov4XL8YGrLZsw5edb-NtRJRw@mail.gmail.com/
> Signed-off-by: Amit Pundir <amit.pundir@...aro.org>
> ---
> arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 24 +++++++++++-----------
> 1 file changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> index e14fe9bbb386..df2fde9063dc 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> @@ -301,6 +301,18 @@ regulators-0 {
> vdd-l26-supply = <&vreg_s3a_1p35>;
> vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
>
> + vreg_lvs1a_1p8: lvs1 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + vreg_lvs2a_1p8: lvs2 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> vreg_s3a_1p35: smps3 {
> regulator-min-microvolt = <1352000>;
> regulator-max-microvolt = <1352000>;
> @@ -381,18 +393,6 @@ vreg_l26a_1p2: ldo26 {
> regulator-max-microvolt = <1200000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> };
> -
> - vreg_lvs1a_1p8: lvs1 {
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-always-on;
> - };
> -
> - vreg_lvs2a_1p8: lvs2 {
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-always-on;
> - };
This is a hack, but it at least feels less bad than reverting the
async probe patch. I'll leave it to Bjorn to decide if he's OK with
it. Personally, it feels like this would deserve a comment in the dts
to document that these regulators need to be listed first.
Ideally, we could still work towards a root cause. I added a few more
ideas to help with root causing in reply to the original thread about
this.
https://lore.kernel.org/r/CAD=FV=UKyjRNZG-ED2meUAR9aXdco+AbUTHiKixTzjCkaJbjTg@mail.gmail.com/
-Doug
Powered by blists - more mailing lists