[<prev] [next>] [day] [month] [year] [list]
Message-ID: <07b33c1e-895e-d7d7-a108-0ee5f2812ffa@linaro.org>
Date: Wed, 7 Jun 2023 19:45:25 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Marco Giorgi <giorgi.marco.96@...root.org>, netdev@...r.kernel.org
Cc: u.kleine-koenig@...gutronix.de, davem@...emloft.net,
michael@...le.cc, kuba@...nel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH RFC net 1/2] nfc: nxp-nci: Fix i2c read on ThinkPad
hardware
On 07/06/2023 19:00, Marco Giorgi wrote:
> Add the IRQ GPIO configuration.
Why? Please include reasons in commit msg. What you are doing is quite
easy to see.
>
> Signed-off-by: Marco Giorgi <giorgi.marco.96@...root.org>
> ---
> drivers/nfc/nxp-nci/i2c.c | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/drivers/nfc/nxp-nci/i2c.c b/drivers/nfc/nxp-nci/i2c.c
> index d4c299be7949..4ba26a958258 100644
> --- a/drivers/nfc/nxp-nci/i2c.c
> +++ b/drivers/nfc/nxp-nci/i2c.c
> @@ -35,6 +35,7 @@ struct nxp_nci_i2c_phy {
>
> struct gpio_desc *gpiod_en;
> struct gpio_desc *gpiod_fw;
> + struct gpio_desc *gpiod_irq;
>
> int hard_fault; /*
> * < 0 if hardware error occurred (e.g. i2c err)
> @@ -254,10 +255,12 @@ static irqreturn_t nxp_nci_i2c_irq_thread_fn(int irq, void *phy_id)
> return IRQ_NONE;
> }
>
> +static const struct acpi_gpio_params irq_gpios = { 0, 0, false };
> static const struct acpi_gpio_params firmware_gpios = { 1, 0, false };
> static const struct acpi_gpio_params enable_gpios = { 2, 0, false };
>
> static const struct acpi_gpio_mapping acpi_nxp_nci_gpios[] = {
> + { "irq-gpios", &irq_gpios, 1 },
> { "enable-gpios", &enable_gpios, 1 },
> { "firmware-gpios", &firmware_gpios, 1 },
> { }
> @@ -286,6 +289,12 @@ static int nxp_nci_i2c_probe(struct i2c_client *client)
> if (r)
> dev_dbg(dev, "Unable to add GPIO mapping table\n");
>
> + phy->gpiod_irq = devm_gpiod_get(dev, "irq", GPIOD_IN);
Bindings do not allow it. Please update bindings... or not, because they
clearly state that interrupts are already there.
You need to explain what is this.
Best regards,
Krzysztof
Powered by blists - more mailing lists