[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <bd2d1770-9856-d022-5e91-6a2cdc302b73@linaro.org>
Date: Wed, 7 Jun 2023 20:48:43 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Arseniy Krasnov <avkrasnov@...rdevices.ru>,
Liang Yang <liang.yang@...ogic.com>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>,
Vignesh Raghavendra <vigneshr@...com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Neil Armstrong <neil.armstrong@...aro.org>,
Kevin Hilman <khilman@...libre.com>,
Jerome Brunet <jbrunet@...libre.com>,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Cc: oxffffaa@...il.com, kernel@...rdevices.ru,
linux-mtd@...ts.infradead.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-amlogic@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v1 0/2] Meson NAND: waiting w/o wired ready/busy pin
On 07/06/2023 17:18, Arseniy Krasnov wrote:
>
>
> On 07.06.2023 17:50, Arseniy Krasnov wrote:
>> Main thing that this patchset adds is support for waiting for command
>> completion when there is no wired ready/busy pin. This is implemented
>> by using Meson specific command which operates without wired pin, but
>> supports interrupt driven waiting (default way for waiting without
>> hardware pin is 'nand_soft_waitrdy()' which uses software loop instead
>> of interrupt). To select which mode to use during driver initialization,
>> common NAND controller property is used - 'nand-rb'. It is described in
>> 'nand-controller.yaml'. But for Meson, its description was missed in
>> 'amlogic,meson-nand.yaml', so this patchset also adds support for it.
>>
>> Patch for bindings was tested with dt_binding_check and dtbs_check.
>>
>> Arseniy Krasnov (2):
>> dt-bindings: nand: meson: Fix 'nand-rb' property
>> mtd: rawnand: meson: waiting w/o wired ready/busy pin
>>
>> .../bindings/mtd/amlogic,meson-nand.yaml | 7 ++
>> drivers/mtd/nand/raw/meson_nand.c | 82 ++++++++++++++++++-
>> 2 files changed, 85 insertions(+), 4 deletions(-)
>>
>
> Changelog:
> * Two separate patches:
> For bindings: https://lore.kernel.org/linux-mtd/20230606193507.35024-1-AVKrasnov@sberdevices.ru/
> For driver: https://lore.kernel.org/linux-mtd/20230607073015.1280085-1-AVKrasnov@sberdevices.ru/
> Now fixed/updated and combined to this patchset with v1 version.
>
> * In binding patch:
> * Invalid type of 'nand-rb' is fixed, it was 'bool', now it is 'uint32 array' as required. Also
> new declaration of 'nand-rb' contains several restrictions like number of elements and min/max
> value of elements.
> * Location of 'nand-rb' is moved from the controller object to the chip object as required.
Version your patchsets. This is v2, not v1.
Best regards,
Krzysztof
Powered by blists - more mailing lists