linux-kernel - [PATCH v5 09/26] cxl/regs: Remove early capability checks in Component Register setup

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230607221651.2454764-10-terry.bowman@amd.com>
Date:   Wed, 7 Jun 2023 17:16:34 -0500
From:   Terry Bowman <terry.bowman@....com>
To:     <alison.schofield@...el.com>, <vishal.l.verma@...el.com>,
        <ira.weiny@...el.com>, <bwidawsk@...nel.org>,
        <dan.j.williams@...el.com>, <dave.jiang@...el.com>,
        <Jonathan.Cameron@...wei.com>, <linux-cxl@...r.kernel.org>
CC:     <terry.bowman@....com>, <rrichter@....com>,
        <linux-kernel@...r.kernel.org>, <bhelgaas@...gle.com>
Subject: [PATCH v5 09/26] cxl/regs: Remove early capability checks in Component Register setup

From: Robert Richter <rrichter@....com>

When probing the Component Registers in function cxl_probe_regs()
there are also checks for the existence of the HDM and RAS
capabilities. The checks may fail for components that do not implement
the HDM capability causing the Component Registers setup to fail too.

Remove the checks for a generalized use of cxl_probe_regs() and check
them directly before mapping the RAS or HDM capabilities. This allows
it to setup other Component Registers esp. of an RCH Downstream Port,
which will be implemented in a follow-on patch.

Signed-off-by: Robert Richter <rrichter@....com>
Signed-off-by: Terry Bowman <terry.bowman@....com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@...wei.com>
---
 drivers/cxl/core/regs.c | 8 --------
 drivers/cxl/pci.c       | 2 ++
 drivers/cxl/port.c      | 5 ++++-
 3 files changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/cxl/core/regs.c b/drivers/cxl/core/regs.c
index bf80e371ef27..ba2b1763042c 100644
--- a/drivers/cxl/core/regs.c
+++ b/drivers/cxl/core/regs.c
@@ -370,14 +370,6 @@ static int cxl_probe_regs(struct cxl_register_map *map)
 	case CXL_REGLOC_RBI_COMPONENT:
 		comp_map = &map->component_map;
 		cxl_probe_component_regs(dev, base, comp_map);
-		if (!comp_map->hdm_decoder.valid) {
-			dev_err(dev, "HDM decoder registers not found\n");
-			return -ENXIO;
-		}
-
-		if (!comp_map->ras.valid)
-			dev_dbg(dev, "RAS registers not found\n");
-
 		dev_dbg(dev, "Set up component registers\n");
 		break;
 	case CXL_REGLOC_RBI_MEMDEV:
diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
index ac17bc0430dc..945ca0304d68 100644
--- a/drivers/cxl/pci.c
+++ b/drivers/cxl/pci.c
@@ -630,6 +630,8 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	rc = cxl_pci_setup_regs(pdev, CXL_REGLOC_RBI_COMPONENT, &map);
 	if (rc)
 		dev_warn(&pdev->dev, "No component registers (%d)\n", rc);
+	else if (!map.component_map.ras.valid)
+		dev_dbg(&pdev->dev, "RAS registers not found\n");
 
 	cxlds->component_reg_phys = map.resource;
 
diff --git a/drivers/cxl/port.c b/drivers/cxl/port.c
index c23b6164e1c0..e1c7efa9232e 100644
--- a/drivers/cxl/port.c
+++ b/drivers/cxl/port.c
@@ -102,8 +102,11 @@ static int cxl_endpoint_port_probe(struct cxl_port *port)
 		return rc;
 
 	cxlhdm = devm_cxl_setup_hdm(port, &info);
-	if (IS_ERR(cxlhdm))
+	if (IS_ERR(cxlhdm)) {
+		if (PTR_ERR(cxlhdm) == -ENODEV)
+			dev_err(&port->dev, "HDM decoder registers not found\n");
 		return PTR_ERR(cxlhdm);
+	}
 
 	/* Cache the data early to ensure is_visible() works */
 	read_cdat_data(port);
-- 
2.34.1