[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230607115508.2964574-4-l.goehrs@pengutronix.de>
Date: Wed, 7 Jun 2023 13:55:03 +0200
From: Leonard Göhrs <l.goehrs@...gutronix.de>
To: Chandrasekar Ramakrishnan <rcsekar@...sung.com>,
Wolfgang Grandegger <wg@...ndegger.com>,
Marc Kleine-Budde <mkl@...gutronix.de>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>
Cc: kernel@...gutronix.de,
Leonard Göhrs <l.goehrs@...gutronix.de>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, linux-can@...r.kernel.org,
netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v1 4/8] dt-bindings: can: m_can: add termination-{gpios,ohms} properties
The termination-gpios property allows specifying a GPIO pin that
enables/disables a termination resistor on said CAN interface.
The termination-ohms property specifies the resistance of said resistor.
Signed-off-by: Leonard Göhrs <l.goehrs@...gutronix.de>
---
Documentation/devicetree/bindings/net/can/bosch,m_can.yaml | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
index 67879aab623b5..106c79fa560c3 100644
--- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
+++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
@@ -118,6 +118,9 @@ properties:
phys:
maxItems: 1
+ termination-gpios: true
+ termination-ohms: true
+
required:
- compatible
- reg
--
2.39.2
Powered by blists - more mailing lists