lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230607140525.833982-11-hugo@hugovil.com>
Date:   Wed,  7 Jun 2023 10:05:24 -0400
From:   Hugo Villeneuve <hugo@...ovil.com>
To:     gregkh@...uxfoundation.org, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org,
        jirislaby@...nel.org, jringle@...dpoint.com,
        jesse.sung@...onical.com, isaac.true@...onical.com,
        l.perczak@...lintechnologies.com, tomasz.mon@...lingroup.com
Cc:     linux-serial@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, hugo@...ovil.com,
        linux-gpio@...r.kernel.org,
        Hugo Villeneuve <hvilleneuve@...onoff.com>,
        Lech Perczak <lech.perczak@...lingroup.com>
Subject: [PATCH v8 10/10] serial: sc16is7xx: improve comments about variants

From: Hugo Villeneuve <hvilleneuve@...onoff.com>

Replace 740/750/760 with generic terms like 74x/75x/76x to account for
variants like 741, 752 and 762.

Signed-off-by: Hugo Villeneuve <hvilleneuve@...onoff.com>
Reviewed-by: Lech Perczak <lech.perczak@...lingroup.com>
---
 drivers/tty/serial/sc16is7xx.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 7616703f7438..c9edc51870ca 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -223,7 +223,7 @@
  * trigger levels. Trigger levels from 4 characters to 60 characters are
  * available with a granularity of four.
  *
- * When the trigger level setting in TLR is zero, the SC16IS740/750/760 uses the
+ * When the trigger level setting in TLR is zero, the SC16IS74x/75x/76x uses the
  * trigger level setting defined in FCR. If TLR has non-zero trigger level value
  * the trigger level defined in FCR is discarded. This applies to both transmit
  * FIFO and receive FIFO trigger level setting.
@@ -234,7 +234,7 @@
 #define SC16IS7XX_TLR_TX_TRIGGER(words)	((((words) / 4) & 0x0f) << 0)
 #define SC16IS7XX_TLR_RX_TRIGGER(words)	((((words) / 4) & 0x0f) << 4)
 
-/* IOControl register bits (Only 750/760) */
+/* IOControl register bits (Only 75x/76x) */
 #define SC16IS7XX_IOCONTROL_LATCH_BIT	(1 << 0) /* Enable input latching */
 #define SC16IS7XX_IOCONTROL_MODEM_A_BIT	(1 << 1) /* Enable GPIO[7:4] as modem A pins */
 #define SC16IS7XX_IOCONTROL_MODEM_B_BIT	(1 << 2) /* Enable GPIO[3:0] as modem B pins */
@@ -249,9 +249,9 @@
 #define SC16IS7XX_EFCR_RTS_INVERT_BIT	(1 << 5) /* RTS output inversion */
 #define SC16IS7XX_EFCR_IRDA_MODE_BIT	(1 << 7) /* IrDA mode
 						  * 0 = rate upto 115.2 kbit/s
-						  *   - Only 750/760
+						  *   - Only 75x/76x
 						  * 1 = rate upto 1.152 Mbit/s
-						  *   - Only 760
+						  *   - Only 76x
 						  */
 
 /* EFR register bits */
-- 
2.30.2

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ