Message-ID: <20230607140559.2263470-4-dhowells@redhat.com>
Date:   Wed,  7 Jun 2023 15:05:48 +0100
From:   David Howells <dhowells@...hat.com>
To:     netdev@...r.kernel.org,
        Linus Torvalds <torvalds@...ux-foundation.org>
Cc:     David Howells <dhowells@...hat.com>,
        Chuck Lever <chuck.lever@...cle.com>,
        Boris Pismenny <borisp@...dia.com>,
        John Fastabend <john.fastabend@...il.com>,
        Jakub Kicinski <kuba@...nel.org>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Paolo Abeni <pabeni@...hat.com>,
        Willem de Bruijn <willemdebruijn.kernel@...il.com>,
        David Ahern <dsahern@...nel.org>,
        Matthew Wilcox <willy@...radead.org>,
        Jens Axboe <axboe@...nel.dk>, linux-mm@...ck.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH net-next v5 03/14] splice, net: Use sendmsg(MSG_SPLICE_PAGES) rather than ->sendpage()

Replace generic_splice_sendpage() + splice_from_pipe + pipe_to_sendpage()
with a net-specific handler, splice_to_socket(), that calls sendmsg() with
MSG_SPLICE_PAGES set instead of calling ->sendpage().

MSG_MORE is used to indicate if the sendmsg() is expected to be followed
with more data.

This allows multiple pipe-buffer pages to be passed in a single call in a
BVEC iterator, allowing the processing to be pushed down to a loop in the
protocol driver.  This helps pave the way for passing multipage folios down
too.

Protocols that haven't been converted to handle MSG_SPLICE_PAGES yet should
just ignore it and do a normal sendmsg() for now - although that may be a
bit slower as it may copy everything.

Signed-off-by: David Howells <dhowells@...hat.com>
cc: "David S. Miller" <davem@...emloft.net>
cc: Eric Dumazet <edumazet@...gle.com>
cc: Jakub Kicinski <kuba@...nel.org>
cc: Paolo Abeni <pabeni@...hat.com>
cc: Jens Axboe <axboe@...nel.dk>
cc: Matthew Wilcox <willy@...radead.org>
cc: netdev@...r.kernel.org
---

Notes:
    ver #5)
     - Preclear ret just in case len is 0.

 fs/splice.c            | 158 +++++++++++++++++++++++++++++++++--------
 include/linux/fs.h     |   2 -
 include/linux/splice.h |   2 +
 net/socket.c           |  26 +------
 4 files changed, 131 insertions(+), 57 deletions(-)

diff --git a/fs/splice.c b/fs/splice.c
index 3e06611d19ae..e337630aed64 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -33,6 +33,7 @@
 #include <linux/fsnotify.h>
 #include <linux/security.h>
 #include <linux/gfp.h>
+#include <linux/net.h>
 #include <linux/socket.h>
 #include <linux/sched/signal.h>
 
@@ -448,30 +449,6 @@ const struct pipe_buf_operations nosteal_pipe_buf_ops = {
 };
 EXPORT_SYMBOL(nosteal_pipe_buf_ops);
 
-/*
- * Send 'sd->len' bytes to socket from 'sd->file' at position 'sd->pos'
- * using sendpage(). Return the number of bytes sent.
- */
-static int pipe_to_sendpage(struct pipe_inode_info *pipe,
-			    struct pipe_buffer *buf, struct splice_desc *sd)
-{
-	struct file *file = sd->u.file;
-	loff_t pos = sd->pos;
-	int more;
-
-	if (!likely(file->f_op->sendpage))
-		return -EINVAL;
-
-	more = (sd->flags & SPLICE_F_MORE) ? MSG_MORE : 0;
-
-	if (sd->len < sd->total_len &&
-	    pipe_occupancy(pipe->head, pipe->tail) > 1)
-		more |= MSG_SENDPAGE_NOTLAST;
-
-	return file->f_op->sendpage(file, buf->page, buf->offset,
-				    sd->len, &pos, more);
-}
-
 static void wakeup_pipe_writers(struct pipe_inode_info *pipe)
 {
 	smp_mb();
@@ -652,7 +629,7 @@ static void splice_from_pipe_end(struct pipe_inode_info *pipe, struct splice_des
  * Description:
  *    This function does little more than loop over the pipe and call
  *    @actor to do the actual moving of a single struct pipe_buffer to
- *    the desired destination. See pipe_to_file, pipe_to_sendpage, or
+ *    the desired destination. See pipe_to_file, pipe_to_sendmsg, or
  *    pipe_to_user.
  *
  */
@@ -833,8 +810,9 @@ iter_file_splice_write(struct pipe_inode_info *pipe, struct file *out,
 
 EXPORT_SYMBOL(iter_file_splice_write);
 
+#ifdef CONFIG_NET
 /**
- * generic_splice_sendpage - splice data from a pipe to a socket
+ * splice_to_socket - splice data from a pipe to a socket
  * @pipe:	pipe to splice from
  * @out:	socket to write to
  * @ppos:	position in @out
@@ -846,13 +824,131 @@ EXPORT_SYMBOL(iter_file_splice_write);
  *    is involved.
  *
  */
-ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe, struct file *out,
-				loff_t *ppos, size_t len, unsigned int flags)
+ssize_t splice_to_socket(struct pipe_inode_info *pipe, struct file *out,
+			 loff_t *ppos, size_t len, unsigned int flags)
 {
-	return splice_from_pipe(pipe, out, ppos, len, flags, pipe_to_sendpage);
-}
+	struct socket *sock = sock_from_file(out);
+	struct bio_vec bvec[16];
+	struct msghdr msg = {};
+	ssize_t ret = 0;
+	size_t spliced = 0;
+	bool need_wakeup = false;
+
+	pipe_lock(pipe);
+
+	while (len > 0) {
+		unsigned int head, tail, mask, bc = 0;
+		size_t remain = len;
+
+		/*
+		 * Check for signal early to make process killable when there
+		 * are always buffers available
+		 */
+		ret = -ERESTARTSYS;
+		if (signal_pending(current))
+			break;
 
-EXPORT_SYMBOL(generic_splice_sendpage);
+		while (pipe_empty(pipe->head, pipe->tail)) {
+			ret = 0;
+			if (!pipe->writers)
+				goto out;
+
+			if (spliced)
+				goto out;
+
+			ret = -EAGAIN;
+			if (flags & SPLICE_F_NONBLOCK)
+				goto out;
+
+			ret = -ERESTARTSYS;
+			if (signal_pending(current))
+				goto out;
+
+			if (need_wakeup) {
+				wakeup_pipe_writers(pipe);
+				need_wakeup = false;
+			}
+
+			pipe_wait_readable(pipe);
+		}
+
+		head = pipe->head;
+		tail = pipe->tail;
+		mask = pipe->ring_size - 1;
+
+		while (!pipe_empty(head, tail)) {
+			struct pipe_buffer *buf = &pipe->bufs[tail & mask];
+			size_t seg;
+
+			if (!buf->len) {
+				tail++;
+				continue;
+			}
+
+			seg = min_t(size_t, remain, buf->len);
+			seg = min_t(size_t, seg, PAGE_SIZE);
+
+			ret = pipe_buf_confirm(pipe, buf);
+			if (unlikely(ret)) {
+				if (ret == -ENODATA)
+					ret = 0;
+				break;
+			}
+
+			bvec_set_page(&bvec[bc++], buf->page, seg, buf->offset);
+			remain -= seg;
+			if (seg >= buf->len)
+				tail++;
+			if (bc >= ARRAY_SIZE(bvec))
+				break;
+		}
+
+		if (!bc)
+			break;
+
+		msg.msg_flags = MSG_SPLICE_PAGES;
+		if (flags & SPLICE_F_MORE)
+			msg.msg_flags |= MSG_MORE;
+		if (remain && pipe_occupancy(pipe->head, tail) > 0)
+			msg.msg_flags |= MSG_MORE;
+
+		iov_iter_bvec(&msg.msg_iter, ITER_SOURCE, bvec, bc,
+			      len - remain);
+		ret = sock_sendmsg(sock, &msg);
+		if (ret <= 0)
+			break;
+
+		spliced += ret;
+		len -= ret;
+		tail = pipe->tail;
+		while (ret > 0) {
+			struct pipe_buffer *buf = &pipe->bufs[tail & mask];
+			size_t seg = min_t(size_t, ret, buf->len);
+
+			buf->offset += seg;
+			buf->len -= seg;
+			ret -= seg;
+
+			if (!buf->len) {
+				pipe_buf_release(pipe, buf);
+				tail++;
+			}
+		}
+
+		if (tail != pipe->tail) {
+			pipe->tail = tail;
+			if (pipe->files)
+				need_wakeup = true;
+		}
+	}
+
+out:
+	pipe_unlock(pipe);
+	if (need_wakeup)
+		wakeup_pipe_writers(pipe);
+	return spliced ?: ret;
+}
+#endif
 
 static int warn_unsupported(struct file *file, const char *op)
 {
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 133f0640fb24..df92f4b3d122 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2759,8 +2759,6 @@ extern ssize_t generic_file_splice_read(struct file *, loff_t *,
 		struct pipe_inode_info *, size_t, unsigned int);
 extern ssize_t iter_file_splice_write(struct pipe_inode_info *,
 		struct file *, loff_t *, size_t, unsigned int);
-extern ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe,
-		struct file *out, loff_t *, size_t len, unsigned int flags);
 extern long do_splice_direct(struct file *in, loff_t *ppos, struct file *out,
 		loff_t *opos, size_t len, unsigned int flags);
 
diff --git a/include/linux/splice.h b/include/linux/splice.h
index a55179fd60fc..991ae318b6eb 100644
--- a/include/linux/splice.h
+++ b/include/linux/splice.h
@@ -84,6 +84,8 @@ extern long do_splice(struct file *in, loff_t *off_in,
 
 extern long do_tee(struct file *in, struct file *out, size_t len,
 		   unsigned int flags);
+extern ssize_t splice_to_socket(struct pipe_inode_info *pipe, struct file *out,
+				loff_t *ppos, size_t len, unsigned int flags);
 
 /*
  * for dynamic pipe sizing
diff --git a/net/socket.c b/net/socket.c
index 3df96e9ba4e2..c4d9104418c8 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -57,6 +57,7 @@
 #include <linux/mm.h>
 #include <linux/socket.h>
 #include <linux/file.h>
+#include <linux/splice.h>
 #include <linux/net.h>
 #include <linux/interrupt.h>
 #include <linux/thread_info.h>
@@ -126,8 +127,6 @@ static long compat_sock_ioctl(struct file *file,
 			      unsigned int cmd, unsigned long arg);
 #endif
 static int sock_fasync(int fd, struct file *filp, int on);
-static ssize_t sock_sendpage(struct file *file, struct page *page,
-			     int offset, size_t size, loff_t *ppos, int more);
 static ssize_t sock_splice_read(struct file *file, loff_t *ppos,
 				struct pipe_inode_info *pipe, size_t len,
 				unsigned int flags);
@@ -162,8 +161,7 @@ static const struct file_operations socket_file_ops = {
 	.mmap =		sock_mmap,
 	.release =	sock_close,
 	.fasync =	sock_fasync,
-	.sendpage =	sock_sendpage,
-	.splice_write = generic_splice_sendpage,
+	.splice_write = splice_to_socket,
 	.splice_read =	sock_splice_read,
 	.show_fdinfo =	sock_show_fdinfo,
 };
@@ -1066,26 +1064,6 @@ int kernel_recvmsg(struct socket *sock, struct msghdr *msg,
 }
 EXPORT_SYMBOL(kernel_recvmsg);
 
-static ssize_t sock_sendpage(struct file *file, struct page *page,
-			     int offset, size_t size, loff_t *ppos, int more)
-{
-	struct socket *sock;
-	int flags;
-	int ret;
-
-	sock = file->private_data;
-
-	flags = (file->f_flags & O_NONBLOCK) ? MSG_DONTWAIT : 0;
-	/* more is a combination of MSG_MORE and MSG_SENDPAGE_NOTLAST */
-	flags |= more;
-
-	ret = kernel_sendpage(sock, page, offset, size, flags);
-
-	if (trace_sock_send_length_enabled())
-		call_trace_sock_send_length(sock->sk, ret, 0);
-	return ret;
-}
-
 static ssize_t sock_splice_read(struct file *file, loff_t *ppos,
 				struct pipe_inode_info *pipe, size_t len,
 				unsigned int flags)

Powered by blists - more mailing lists