[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230608171932.GG3572061@google.com>
Date: Thu, 8 Jun 2023 18:19:32 +0100
From: Lee Jones <lee@...nel.org>
To: Jakob Hauser <jahau@...ketmail.com>
Cc: Sebastian Reichel <sre@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Beomho Seo <beomho.seo@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Stephan Gerhold <stephan@...hold.net>,
Raymond Hackley <raymondhackley@...tonmail.com>,
Pavel Machek <pavel@....cz>, Axel Lin <axel.lin@...ics.com>,
ChiYuan Huang <cy_huang@...htek.com>,
Linus Walleij <linus.walleij@...aro.org>,
Henrik Grimler <henrik@...mler.se>,
Christophe Jaillet <christophe.jaillet@...adoo.fr>,
linux-pm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, phone-devel@...r.kernel.org,
~postmarketos/upstreaming@...ts.sr.ht
Subject: Re: [PATCH v6 00/10 RESEND] Add RT5033 charger device driver
On Mon, 15 May 2023, Jakob Hauser wrote:
> This patchset adds the charger driver "rt5033-charger". It is part of the
> multifunction device rt5033. The patchset is based on an older version by
> Beomho Seo of March 2015. For more information on the history and setup of
> the patchset see the cover sheet of version v1, there is a link further down
> below the changelog.
>
> RESEND: Sorry for spamming. The first try of sending v6 got interrupted and
> was split into two threads on the lore list. Therefore sending it again.
>
> Changes in v6:
> - Patch 5: In function rt5033_charger_probe() after
> calling rt5033_charger_dt_init() replaced the return value from "-ENODEV"
> to "PTR_ERR(charger->chg)", as suggested by Christophe.
> - Patch 9: Changed the patch from adding "power-supplies: true" to replacing
> "additionalProperties: false" by "unevaluatedProperties: false", as
> suggested by Krzysztof.
>
> v1: https://lore.kernel.org/linux-pm/cover.1677620677.git.jahau@rocketmail.com/T/#t
> v2: https://lore.kernel.org/linux-pm/cover.1681646904.git.jahau@rocketmail.com/T/#t
> v3: https://lore.kernel.org/linux-pm/cover.1682636929.git.jahau@rocketmail.com/T/#t
> v4: https://lore.kernel.org/linux-pm/20230506155435.3005-1-jahau@rocketmail.com/T/#t
> v5: https://lore.kernel.org/linux-pm/20230514123130.41172-1-jahau@rocketmail.com/T/#t
>
> The result of the patchset v6 can be seen at:
> https://github.com/Jakko3/linux/blob/rt5033-charger_v6/drivers/power/supply/rt5033_charger.c
>
> Jakob Hauser (9):
> mfd: rt5033: Fix chip revision readout
> mfd: rt5033: Fix STAT_MASK, HZ_MASK and AICR defines
> mfd: rt5033: Apply preparatory changes before adding rt5033-charger
> driver
> power: supply: rt5033_charger: Add RT5033 charger device driver
> power: supply: rt5033_charger: Add cable detection and USB OTG supply
> power: supply: rt5033_battery: Move struct rt5033_battery to battery
> driver
> power: supply: rt5033_battery: Adopt status property from charger
> dt-bindings: power: supply: rt5033-battery: Apply
> unevaluatedProperties
> dt-bindings: Add rt5033 mfd, regulator and charger
>
> Stephan Gerhold (1):
> mfd: rt5033: Drop rt5033-battery sub-device
>
> .../bindings/mfd/richtek,rt5033.yaml | 138 ++++
> .../power/supply/richtek,rt5033-battery.yaml | 2 +-
> .../power/supply/richtek,rt5033-charger.yaml | 65 ++
> drivers/mfd/rt5033.c | 8 +-
> drivers/power/supply/Kconfig | 8 +
> drivers/power/supply/Makefile | 1 +
> drivers/power/supply/rt5033_battery.c | 38 +-
> drivers/power/supply/rt5033_charger.c | 744 ++++++++++++++++++
> include/linux/mfd/rt5033-private.h | 64 +-
> include/linux/mfd/rt5033.h | 24 -
> 10 files changed, 1034 insertions(+), 58 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml
> create mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml
> create mode 100644 drivers/power/supply/rt5033_charger.c
All applied. Sent for build testing.
I'll follow-up with a PR soon.
--
Lee Jones [李琼斯]
Powered by blists - more mailing lists