Message-ID: <ZII-vJWGb7F97S_A@V92F7Y9K0C.corp.robot.car>
Date:   Thu, 8 Jun 2023 13:49:00 -0700
From:   Dennis Zhou <dennis@...nel.org>
To:     Ulf Hansson <ulf.hansson@...aro.org>,
        Greg KH <gregkh@...uxfoundation.org>
Cc:     Dennis Zhou <dennis@...nel.org>, linux-mmc@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        Linus Walleij <linus.walleij@...aro.org>
Subject: Re: [PATCH v2] mmc: inline the first mmc_scan() on mmc_start_host()

On Fri, May 12, 2023 at 01:42:51PM +0200, Ulf Hansson wrote:
> + Linus,
> 
> Hi Dennis,
> 
> On Mon, 3 Apr 2023 at 11:50, Ulf Hansson <ulf.hansson@...aro.org> wrote:
> >
> > On Fri, 31 Mar 2023 at 20:23, Dennis Zhou <dennis@...nel.org> wrote:
> > >
> > > Hi Ulf,
> > >
> > > On Fri, Mar 31, 2023 at 02:43:10PM +0200, Ulf Hansson wrote:
> > > > On Thu, 30 Mar 2023 at 01:48, Dennis Zhou <dennis@...nel.org> wrote:
> > > > >
> > > > > When using dm-verity with a data partition on an emmc device, dm-verity
> > > > > races with the discovery of attached emmc devices. This is because mmc's
> > > > > probing code sets up the host data structure then a work item is
> > > > > scheduled to do discovery afterwards. To prevent this race on init,
> > > > > let's inline the first call to detection, __mm_scan(), and let
> > > > > subsequent detect calls be handled via the workqueue.
> > > >
> > > > In principle, I don't mind the changes in $subject patch, as long as
> > > > it doesn't hurt the overall initialization/boot time. Especially, we
> > > > may have more than one mmc-slot being used, so this needs to be well
> > > > tested.
> > > >
> > >
> > > I unfortunately don't have a device with multiple mmcs available. Is
> > > this something you could help me with?
> >
> > Yes, I can help to test. Allow me a few days to see what I can do.
> >
> > Note that, just having one eMMC and one SD card should work too. It
> > doesn't have to be multiple eMMCs.
> >
> > >
> > > > Although, more importantly, I fail to understand how this is going to
> > > > solve the race condition. Any I/O request to an eMMC or SD requires
> > > > the mmc block device driver to be up and running too, which is getting
> > > > probed from a separate module/driver that's not part of mmc_rescan().
> > >
> > > I believe the call chain is something like this:
> > >
> > > __mmc_rescan()
> > >     mmc_rescan_try_freq()
> > >         mmc_attach_mmc()
> > >             mmc_add_card()
> > >                 device_add()
> > >                     bus_probe_device()
> > >                         mmc_blk_probe()
> > >
> > > The initial calling of this is the host probe. So effectively if there
> > > is a card attached, we're inlining the device_add() call for the card
> > > attached rather than waiting for the workqueue item to kick off.
> > >
> > > dm is a part of late_initcall() while mmc is a module_init(), when built
> > > in becoming a device_initcall(). So this solves a race via the initcall
> > > chain. In the current state, device_initcall() finishes and we move onto
> > > the late_initcall() phase. But now, dm is racing with the workqueue to
> > > init the attached emmc device.
> >
> > You certainly have a point!
> >
> > This should work when the mmc blk module is built-in. Even if that
> > doesn't solve the entire problem, it should be a step in the right
> > direction.
> >
> > I will give it some more thinking and run some tests at my side, then
> > I will get back to you again.
> >
> > Kind regards
> > Uffe
> >
> > > >
> > > > >
> > > > > Signed-off-by: Dennis Zhou <dennis@...nel.org>
> > > > > ---
> > > > > Sigh.. fix missing static declaration.
> > > > >
> > > > >  drivers/mmc/core/core.c | 15 +++++++++++----
> > > > >  1 file changed, 11 insertions(+), 4 deletions(-)
> > > > >
> > > > > diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
> > > > > index 368f10405e13..fda7ee57dee3 100644
> > > > > --- a/drivers/mmc/core/core.c
> > > > > +++ b/drivers/mmc/core/core.c
> > > > > @@ -2185,10 +2185,8 @@ int mmc_card_alternative_gpt_sector(struct mmc_card *card, sector_t *gpt_sector)
> > > > >  }
> > > > >  EXPORT_SYMBOL(mmc_card_alternative_gpt_sector);
> > > > >
> > > > > -void mmc_rescan(struct work_struct *work)
> > > > > +static void __mmc_rescan(struct mmc_host *host)
> > > > >  {
> > > > > -       struct mmc_host *host =
> > > > > -               container_of(work, struct mmc_host, detect.work);
> > > > >         int i;
> > > > >
> > > > >         if (host->rescan_disable)
> > > > > @@ -2249,6 +2247,14 @@ void mmc_rescan(struct work_struct *work)
> > > > >                 mmc_schedule_delayed_work(&host->detect, HZ);
> > > > >  }
> > > > >
> > > > > +void mmc_rescan(struct work_struct *work)
> > > > > +{
> > > > > +       struct mmc_host *host =
> > > > > +               container_of(work, struct mmc_host, detect.work);
> > > > > +
> > > > > +       __mmc_rescan(host);
> > > > > +}
> > > > > +
> > > > >  void mmc_start_host(struct mmc_host *host)
> > > > >  {
> > > > >         host->f_init = max(min(freqs[0], host->f_max), host->f_min);
> > > > > @@ -2261,7 +2267,8 @@ void mmc_start_host(struct mmc_host *host)
> > > > >         }
> > > > >
> > > > >         mmc_gpiod_request_cd_irq(host);
> > > > > -       _mmc_detect_change(host, 0, false);
> > > > > +       host->detect_change = 1;
> > > > > +       __mmc_rescan(host);
> > > > >  }
> > > > >
> > > > >  void __mmc_stop_host(struct mmc_host *host)
> > > > > --
> > > > > 2.40.0
> > > > >
> 
> My apologies for the long delay. I finally managed to test this.
> 
> I decided to pick an old arm32 based platform. An ST-Ericsson HREF,
> based upon the ux500 SoC. It's quite good to use for these types of
> tests as it has two eMMCs soldered, an embedded SDIO (for WiFi) and an
> SD-card slot. So in total there are 4 devices that get probed.
> 
> The SDIO card isn't detected properly, but always fails in the similar
> way (thus I left it out from the below data). I tested both with and
> without an SD card inserted during boot, to get some more data to
> compare. These are the summary from my tests:
> 
> v6.4-rc1 without SD card:
> ~2.18s - MMC1 (eMMC)
> ~3.33s - MMC3 (eMMC)
> ~5.91s - kernel boot complete
> 
> v6.4-rc1 with an SD card:
> ~2.18s - MMC1 (eMMC)
> ~3.45s - MMC3 (eMMC)
> ~3.57s - MMC2 (SD)
> ~5.76s - kernel boot complete
> 
> v6.4-rc1 + patch without SD card:
> ~2.24s - MMC1 (eMMC)
> ~3.58s - MMC3 (eMMC)
> ~5.96s - kernel boot complete
> 
> v6.4-rc1 + patch with an SD card:
> ~2.24s - MMC1 (eMMC)
> ~3.73s - MMC2 (SD)
> ~3.98s - MMC3 (eMMC)
> ~6.73s - kernel boot complete
> 
> By looking at these results, I was kind of surprised. I was thinking
> that the asynchronous probe should address the parallelism problem.
> Then I discovered that it in fact, hasn't been enabled for the mmci
> driver that is being used for this platform. Huh, I was under the
> assumption that it has been enabled for all mmc hosts by now. :-)
> 
> Okay, so I am going to run another round of tests, with async probe
> enabled for the mmci driver too. I will let you know the results as
> soon as I can.
> 
> Kind regards
> Uffe

Hi Uffe,

Kindly this has been way too long for review. It's been over 3 months.
What's going on here?

I think there's a misunderstanding too. Without this fix, the machine
doesn't even boot. I'm not sure why perf is the blocking question here.

Greg, is there another tree I can run this through?

Thanks,
Dennis

Powered by blists - more mailing lists