| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <8a88cbee5c6245f2941c700b2bb30697@realtek.com>
Date: Thu, 8 Jun 2023 07:24:03 +0000
From: Stanley Chang[昌育德]
<stanley_chang@...ltek.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
CC: Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Alan Stern <stern@...land.harvard.edu>,
Ray Chi <raychi@...gle.com>,
Matthias Kaehlcke <mka@...omium.org>,
Douglas Anderson <dianders@...omium.org>,
Michael Grzeschik <m.grzeschik@...gutronix.de>,
Mathias Nyman <mathias.nyman@...ux.intel.com>,
Flavio Suligoi <f.suligoi@...m.it>,
"linux-phy@...ts.infradead.org" <linux-phy@...ts.infradead.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>
Subject: RE: [PATCH v3 4/5] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 2.0 PHY
Hi Krzysztof,
>
> On 07/06/2023 08:24, Stanley Chang wrote:
> > Add the documentation explain the property about Realtek USB PHY driver.
> >
> > Realtek DHC (digital home center) RTD SoCs support DWC3 XHCI USB
> > controller. Added the driver to drive the USB 2.0 PHY transceivers.
> >
> > Signed-off-by: Stanley Chang <stanley_chang@...ltek.com>
> > ---
> > v2 to v3 change:
> > 1. Broken down into two patches, one for each of USB 2 & 3.
> > 2. Add more description about Realtek RTD SoCs architecture.
> > 3. Removed parameter v1 support for simplification.
> > 4. Revised the compatible name for fallback compatible.
> > 5. Remove some properties that can be set in the driver.
> > v1 to v2 change:
> > Add phy-cells for generic phy driver
> > ---
> > .../bindings/phy/realtek,usb2phy.yaml | 213
> ++++++++++++++++++
> > 1 file changed, 213 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/phy/realtek,usb2phy.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/phy/realtek,usb2phy.yaml
> > b/Documentation/devicetree/bindings/phy/realtek,usb2phy.yaml
> > new file mode 100644
> > index 000000000000..69911e20a561
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/phy/realtek,usb2phy.yaml
> > @@ -0,0 +1,213 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) # Copyright 2023
> > +Realtek Semiconductor Corporation %YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/phy/realtek,usb2phy.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Realtek DHC SoCs USB 2.0 PHY
> > +
> > +maintainers:
> > + - Stanley Chang <stanley_chang@...ltek.com>
> > +
> > +description:
> > + Realtek USB 2.0 PHY support the digital home center (DHC) RTD series
> SoCs.
> > + The USB 2.0 PHY driver is designed to support the XHCI controller.
> > +The SoCs
> > + support multiple XHCI controllers. One PHY device node maps to one
> > +XHCI
> > + controller.
> > +
> > + RTD1295/RTD1619 SoCs USB
> > + The USB architecture includes three XHCI controllers.
> > + Each XHCI maps to one USB 2.0 PHY and map one USB 3.0 PHY on some
> > + controllers.
> > + XHCI controller#0 -- usb2phy -- phy#0
> > + |- usb3phy -- phy#0 XHCI controller#1 -- usb2phy
> > + -- phy#0 XHCI controller#2 -- usb2phy -- phy#0
> > + |- usb3phy -- phy#0
> > +
> > + RTD1395 SoCs USB
> > + The USB architecture includes two XHCI controllers.
> > + The controller#0 has one USB 2.0 PHY. The controller#1 includes two
> > + USB 2.0 PHY.
> > + XHCI controller#0 -- usb2phy -- phy#0 XHCI controller#1 -- usb2phy
> > + -- phy#0
> > + |- phy#1
> > +
> > + RTD1319/RTD1619b SoCs USB
> > + The USB architecture includes three XHCI controllers.
> > + Each XHCI maps to one USB 2.0 PHY and map one USB 3.0 PHY on
> controllers#2.
> > + XHCI controller#0 -- usb2phy -- phy#0 XHCI controller#1 -- usb2phy
> > + -- phy#0 XHCI controller#2 -- usb2phy -- phy#0
> > + |- usb3phy -- phy#0
> > +
> > + RTD1319d SoCs USB
> > + The USB architecture includes three XHCI controllers.
> > + Each xhci maps to one USB 2.0 PHY and map one USB 3.0 PHY on
> controllers#0.
> > + XHCI controller#0 -- usb2phy -- phy#0
> > + |- usb3phy -- phy#0 XHCI controller#1 -- usb2phy
> > + -- phy#0 XHCI controller#2 -- usb2phy -- phy#0
> > +
> > + RTD1312c/RTD1315e SoCs USB
> > + The USB architecture includes three XHCI controllers.
> > + Each XHCI maps to one USB 2.0 PHY.
> > + XHCI controller#0 -- usb2phy -- phy#0 XHCI controller#1 -- usb2phy
> > + -- phy#0 XHCI controller#2 -- usb2phy -- phy#0
> > +
> > +properties:
> > + compatible:
> > + items:
> > + - enum:
> > + - realtek,rtd1295-usb2phy
> > + - realtek,rtd1395-usb2phy
> > + - realtek,rtd1619-usb2phy
> > + - realtek,rtd1319-usb2phy
> > + - realtek,rtd1619b-usb2phy
> > + - realtek,rtd1312c-usb2phy
> > + - realtek,rtd1319d-usb2phy
> > + - realtek,rtd1315e-usb2phy
>
> Keep entries ordered alphabetically.
Okay.
> > + - const: realtek,usb2phy
> > +
> > + reg:
> > + items:
> > + - description: PHY data registers
> > + - description: PHY control registers
> > +
> > + "#address-cells":
> > + const: 1
> > +
> > + "#size-cells":
> > + const: 0
> > +
> > + "#phy-cells":
> > + const: 0
> > +
> > + realtek,usb-ctrl:
> > + description: The phandle of syscon used to control USB PHY power
> domain.
> > + $ref: /schemas/types.yaml#/definitions/phandle
>
> No, we have power-domains for this.
Maybe I use the word "control power domain" is not well, I just want to control the ldo of usb phy.
Revised:
The phandle of syscon used to control the ldo of USB PHY.
> > +
> > +patternProperties:
> > + "^phy@[0-3]+$":
> > + type: object
> > + description:
> > + Each sub-node is a PHY device for one XHCI controller.
>
> I don't think it is true. You claim above that you have 0 as phy-cells, means you
> have one phy. Here you say you can have up to 4 phys.
I mean the driver can support up to 4 phys.
For RTD1295 has only one phy.
For RTD1395 has two phys.
> > + For most Relatek SoCs, one XHCI controller only support one the USB
> 2.0
> > + phy. For RTD1395 SoC, the one XHCI controller has two USB 2.0
> PHYs.
> > + properties:
> > + realtek,page0-param:
> > + description: PHY parameter at page 0. The data are the pair of
> the
> > + offset and value.
>
> This needs to be specific. What the heck is "PHY parameter"?
>
> > + $ref: /schemas/types.yaml#/definitions/uint32-array
>
> Array? Then maxItems.
I have found other document.
It should be a uint32-matrix.
I will add the maxItems.
> > +
> > + realtek,page1-param:
> > + description: PHY parameter at page 1. The data are the pair of
> the
> > + offset and value.
> > + $ref: /schemas/types.yaml#/definitions/uint32-array
> > +
> > + realtek,page2-param:
> > + description: PHY parameter at page 2. The data are the pair of
> the
> > + offset and value. If the PHY support the page 2 parameter.
> > + $ref: /schemas/types.yaml#/definitions/uint32-array
> > +
> > + realtek,support-page2-param:
> > + description: Set this flag if PHY support page 2 parameter.
>
> Why this cannot be deducted from compatible?
It can identify by compatible.
>
> > + type: boolean
> > +
> > + realtek,do-toggle:
> > + description: Set this flag to enable PHY parameter toggle when
> port
> > + status change.
>
> Do not instruct OS what to do. Explain why this is a hardware characteristic.
In my original intention, we hope that this property can be used to control the phy driver do parameter toggle.
Is it a hardware characteristic? I don't think it's exactly a hardware feature.
Maybe it can be specified by the compatible.
> > + type: boolean
> > +
> > + realtek,do-toggle-driving:
> > + description: Set this flag to enable PHY parameter toggle for
> adjust
> > + the driving when port status change.
>
> Do not instruct OS what to do. Explain why this is a hardware characteristic.
>
>
> > + type: boolean
> > +
> > + realtek,check-efuse:
> > + description: Enable to update PHY parameter from reading otp
> table.
>
> Do not instruct OS what to do. Explain why this is a hardware characteristic.
Same above.
> > + type: boolean
> > +
> > + realtek,use-default-parameter:
> > + description: Don't set parameter and use default value in
> hardware.
>
> NAK, you are just making things up.
This is a software flow control.
I will remove it.
>
> > + type: boolean
> > +
> > + realtek,is-double-sensitivity-mode:
> > + description: Set this flag to enable double sensitivity mode.
>
> All your descriptions copy the name of property. You basically say nothing more.
> I already mentioned this before. Don't ignore the feedback, but address it.
I will improve this.
> > + type: boolean
> > +
> > + realtek,ldo-force-enable:
> > + description: Set this flag to force enable ldo mode.
>
> Drop everywhere "Set this flag to", because it is redundant. Now compare what
> is left with property name.
>
> Property name: realtek,ldo-force-enable
> Your description: "force enable ldo mode"
>
> How is this helpful to anybody?
This is a software flow control.
I will remove it.
Thanks,
Stanley
.
Powered by blists - more mailing lists