| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <71960b11-5686-9af5-423b-bfdaec56f3f9@linaro.org>
Date: Thu, 8 Jun 2023 14:06:49 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Varadarajan Narayanan <quic_varada@...cinc.com>, agross@...nel.org,
andersson@...nel.org, konrad.dybcio@...aro.org,
gregkh@...uxfoundation.org, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org,
mturquette@...libre.com, sboyd@...nel.org, quic_wcheng@...cinc.com,
linux-arm-msm@...r.kernel.org, linux-usb@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-clk@...r.kernel.org
Subject: Re: [PATCH v14 3/5] arm64: dts: qcom: ipq9574: Add USB related nodes
On 08/06/2023 13:03, Varadarajan Narayanan wrote:
> Add USB phy and controller related nodes
>
> SS PHY need two supplies and HS PHY needs three supplies. 0.925V
> and 3.3V are from fixed regulators and 1.8V is generated from
> PMIC's LDO
>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
> Signed-off-by: Varadarajan Narayanan <quic_varada@...cinc.com>
> ---
> Changes in v13:
> - Move fixed regulator definitions from SoC dtsi to board dts
> - Remove 'dr_mode' from SoC dtsi
> - Move 'status' property to the end
> Changes in v12:
> - Rebase
> Changes in v11:
> - Rename dwc_0 -> usb_0_dwc3
> Changes in v10:
> - Fix regulator definitions
> Changes in v8:
> - Change clocks order to match the bindings
> Changes in v7:
> - Change com_aux -> cfg_ahb
> Changes in v6:
> - Introduce fixed regulators for the phy
> - Resolved all 'make dtbs_check' messages
>
> Changes in v5:
> - Fix additional comments
> - Edit nodes to match with qcom,sc8280xp-qmp-usb3-uni-phy.yaml
> - 'make dtbs_check' giving the following messages since
> ipq9574 doesn't have power domains. Hope this is ok
>
> /local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: phy@...00: 'power-domains' is a required property
> From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
> /local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: usb@...0000: 'power-domains' is a required property
> From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
>
> Changes in v4:
> - Use newer bindings without subnodes
> - Fix coding style issues
>
> Changes in v3:
> - Insert the nodes at proper location
>
> Changes in v2:
> - Fixed issues flagged by Krzysztof
> - Fix issues reported by make dtbs_check
> - Remove NOC related clocks (to be added with proper
> interconnect support)
> ---
> arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 18 ++++++
> arch/arm64/boot/dts/qcom/ipq9574.dtsi | 85 +++++++++++++++++++++++++++++
> 2 files changed, 103 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> index 2b3ed8d..8261a2b 100644
> --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> @@ -21,6 +21,24 @@
> chosen {
> stdout-path = "serial0:115200n8";
> };
> +
> + regulator_fixed_3p3: s3300 {
> + compatible = "regulator-fixed";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-name = "fixed_3p3";
> + };
> +
> + regulator_fixed_0p925: s0925 {
> + compatible = "regulator-fixed";
> + regulator-min-microvolt = <925000>;
> + regulator-max-microvolt = <925000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-name = "fixed_0p925";
> + };
> };
Let me repeat from v13, so that it is not lost (please excuse me for the
spam):
Nit: these two regulators are not references from SoC dtsi. So they
don't have to be a part of this commit and can be moved to one of the
next commits (I'd prefer the last one).
>
> &blsp1_uart2 {
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> index 0baeb10..feabc19 100644
> --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> @@ -465,6 +465,91 @@
> status = "disabled";
> };
>
> + usb_0_qusbphy: phy@...00 {
> + compatible = "qcom,ipq9574-qusb2-phy";
> + reg = <0x0007b000 0x180>;
> + #phy-cells = <0>;
> +
> + clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
> + <&xo_board_clk>;
> + clock-names = "cfg_ahb",
> + "ref";
> +
> + resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
> + status = "disabled";
> + };
> +
> + usb_0_qmpphy: phy@...00 {
> + compatible = "qcom,ipq9574-qmp-usb3-phy";
> + reg = <0x0007d000 0xa00>;
> + #phy-cells = <0>;
> +
> + clocks = <&gcc GCC_USB0_AUX_CLK>,
> + <&xo_board_clk>,
> + <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
> + <&gcc GCC_USB0_PIPE_CLK>;
> + clock-names = "aux",
> + "ref",
> + "cfg_ahb",
> + "pipe";
> +
> + resets = <&gcc GCC_USB0_PHY_BCR>,
> + <&gcc GCC_USB3PHY_0_PHY_BCR>;
> + reset-names = "phy",
> + "phy_phy";
> +
> + #clock-cells = <0>;
> + clock-output-names = "usb0_pipe_clk";
> +
> + status = "disabled";
> + };
> +
> + usb3: usb@...8800 {
> + compatible = "qcom,ipq9574-dwc3", "qcom,dwc3";
> + reg = <0x08af8800 0x400>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + clocks = <&gcc GCC_SNOC_USB_CLK>,
> + <&gcc GCC_USB0_MASTER_CLK>,
> + <&gcc GCC_ANOC_USB_AXI_CLK>,
> + <&gcc GCC_USB0_SLEEP_CLK>,
> + <&gcc GCC_USB0_MOCK_UTMI_CLK>;
> +
> + clock-names = "cfg_noc",
> + "core",
> + "iface",
> + "sleep",
> + "mock_utmi";
> +
> + assigned-clocks = <&gcc GCC_USB0_MASTER_CLK>,
> + <&gcc GCC_USB0_MOCK_UTMI_CLK>;
> + assigned-clock-rates = <200000000>,
> + <24000000>;
> +
> + interrupts-extended = <&intc GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "pwr_event";
> +
> + resets = <&gcc GCC_USB_BCR>;
> + status = "disabled";
> +
> + usb_0_dwc3: usb@...0000 {
> + compatible = "snps,dwc3";
> + reg = <0x8a00000 0xcd00>;
> + clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
> + clock-names = "ref";
> + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
> + phys = <&usb_0_qusbphy>, <&usb_0_qmpphy>;
> + phy-names = "usb2-phy", "usb3-phy";
> + tx-fifo-resize;
> + snps,is-utmi-l1-suspend;
> + snps,hird-threshold = /bits/ 8 <0x0>;
> + snps,dis_u2_susphy_quirk;
> + snps,dis_u3_susphy_quirk;
> + };
> + };
> +
> intc: interrupt-controller@...0000 {
> compatible = "qcom,msm-qgic2";
> reg = <0x0b000000 0x1000>, /* GICD */
--
With best wishes
Dmitry
Powered by blists - more mailing lists