| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <a0faf488dde310e1c1c1a676c371e223db6bdca6.1686227712.git.michal.simek@amd.com>
Date: Thu, 8 Jun 2023 14:35:24 +0200
From: Michal Simek <michal.simek@....com>
To: <linux-kernel@...r.kernel.org>, <monstr@...str.eu>,
<michal.simek@...inx.com>, <git@...inx.com>
CC: Manikanta Guntupalli <manikanta.guntupalli@....com>,
Amit Kumar Mahapatra <amit.kumar-mahapatra@...inx.com>,
Andrew Davis <afd@...com>,
"Ashok Reddy Soma" <ashok.reddy.soma@...inx.com>,
Conor Dooley <conor+dt@...nel.org>,
"Geert Uytterhoeven" <geert+renesas@...der.be>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Parth Gajjar <parth.gajjar@....com>,
Piyush Mehta <piyush.mehta@...inx.com>,
Rob Herring <robh+dt@...nel.org>,
Srinivas Neeli <srinivas.neeli@...inx.com>,
Vishal Sagar <vishal.sagar@....com>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>
Subject: [PATCH] arm64: zynqmp: Fix open drain warning on ZynqMP
From: Manikanta Guntupalli <manikanta.guntupalli@....com>
Mark both GPIO lines as GPIO_OPEN_DRAIN which is required by i2c-gpio DT
binding. Similar change was done by commit 8df80c1801c9 ("ARM: dts: exynos:
Convert to new i2c-gpio bindings").
Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@....com>
Signed-off-by: Michal Simek <michal.simek@....com>
---
arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso | 4 ++--
arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso | 4 ++--
arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts | 4 ++--
arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts | 4 ++--
arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts | 4 ++--
arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts | 8 ++++----
arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 4 ++--
arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts | 8 ++++----
arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts | 4 ++--
arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts | 4 ++--
arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts | 8 ++++----
arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts | 8 ++++----
12 files changed, 32 insertions(+), 32 deletions(-)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
index 603839c82599..e06c6824dea4 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
@@ -27,8 +27,8 @@ &i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
/* u14 - 0x40 - ina260 */
/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
index a91d09e7da4b..030e2c93f0e6 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
@@ -22,8 +22,8 @@ &i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
/* u14 - 0x40 - ina260 */
/* u43 - 0x2d - usb5744 */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
index dfd1a18f5a10..c1f21b0e1760 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
@@ -245,8 +245,8 @@ &i2c1 {
status = "okay";
bootph-all;
clock-frequency = <400000>;
- scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
eeprom: eeprom@50 { /* u46 - also at address 0x58 */
bootph-all;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
index d9d1de5f313c..e821d55d8d5a 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
@@ -119,8 +119,8 @@ &i2c1 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 36 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 37 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
eeprom: eeprom@55 {
compatible = "atmel,24c64"; /* 24AA64 */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
index 6503f4985f8d..b59e11316b4b 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
@@ -110,8 +110,8 @@ &i2c0 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c0_default>;
pinctrl-1 = <&pinctrl_i2c0_gpio>;
- scl-gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
tca6416_u26: gpio@20 {
compatible = "ti,tca6416";
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
index b1e933b8a2cd..0d2ea9c09a0a 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
@@ -91,8 +91,8 @@ &i2c0 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c0_default>;
pinctrl-1 = <&pinctrl_i2c0_gpio>;
- scl-gpios = <&gpio 74 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 75 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 74 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 75 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
};
&i2c1 {
@@ -100,8 +100,8 @@ &i2c1 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio 76 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 77 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 76 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 77 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index 44d1f351bb75..d0091d3cb764 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -180,8 +180,8 @@ &i2c1 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
clock-frequency = <100000>;
i2c-mux@75 { /* u11 */
compatible = "nxp,pca9548";
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index 8767f147cbe3..84952c14f021 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -233,8 +233,8 @@ &i2c0 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c0_default>;
pinctrl-1 = <&pinctrl_i2c0_gpio>;
- scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
tca6416_u97: gpio@20 {
compatible = "ti,tca6416";
@@ -497,8 +497,8 @@ &i2c1 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
/* PL i2c via PCA9306 - u45 */
i2c-mux@74 { /* u34 */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
index e185709c0d84..5084ddcee00f 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
@@ -140,8 +140,8 @@ &i2c1 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
/* Another connection to this bus via PL i2c via PCA9306 - u45 */
i2c-mux@74 { /* u34 */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
index 7fceebd1815c..b273bd1d920a 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
@@ -145,8 +145,8 @@ &i2c1 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
tca6416_u97: gpio@20 {
compatible = "ti,tca6416";
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index 27b2416cb6d8..50c384aa253e 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -245,8 +245,8 @@ &i2c0 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c0_default>;
pinctrl-1 = <&pinctrl_i2c0_gpio>;
- scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
tca6416_u97: gpio@20 {
compatible = "ti,tca6416";
@@ -508,8 +508,8 @@ &i2c1 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
/* PL i2c via PCA9306 - u45 */
i2c-mux@74 { /* u34 */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
index 6224365826d8..617cb0405a7d 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
@@ -205,8 +205,8 @@ &i2c0 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c0_default>;
pinctrl-1 = <&pinctrl_i2c0_gpio>;
- scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
tca6416_u22: gpio@20 {
compatible = "ti,tca6416";
@@ -385,8 +385,8 @@ &i2c1 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-mux@74 { /* u26 */
compatible = "nxp,pca9548";
--
2.36.1
Powered by blists - more mailing lists