lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230609170941.1150941-2-javierm@redhat.com>
Date:   Fri,  9 Jun 2023 19:09:36 +0200
From:   Javier Martinez Canillas <javierm@...hat.com>
To:     linux-kernel@...r.kernel.org
Cc:     Geert Uytterhoeven <geert@...ux-m68k.org>,
        Thomas Zimmermann <tzimmermann@...e.de>,
        Maxime Ripard <mripard@...nel.org>,
        Javier Martinez Canillas <javierm@...hat.com>,
        Daniel Vetter <daniel@...ll.ch>,
        David Airlie <airlied@...il.com>,
        dri-devel@...ts.freedesktop.org
Subject: [PATCH v2 1/5] drm/ssd130x: Make default width and height to be controller dependent

Currently the driver hardcodes the default values to 96x16 pixels but this
default resolution depends on the controller. The datasheets for the chips
describes the following display controller resolutions:

 - SH1106:  132 x 64 Dot Matrix OLED/PLED
 - SSD1305: 132 x 64 Dot Matrix OLED/PLED
 - SSD1306: 128 x 64 Dot Matrix OLED/PLED
 - SSD1307: 128 x 39 Dot Matrix OLED/PLED
 - SSD1309: 128 x 64 Dot Matrix OLED/PLED

Add this information to the devices' info structures, and use it set as a
default if not defined in DT rather than hardcoding to an arbitrary value.

Signed-off-by: Javier Martinez Canillas <javierm@...hat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@...e.de>
---

(no changes since v1)

 drivers/gpu/drm/solomon/ssd130x.c | 14 ++++++++++++--
 drivers/gpu/drm/solomon/ssd130x.h |  2 ++
 2 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/solomon/ssd130x.c b/drivers/gpu/drm/solomon/ssd130x.c
index 8cbf5aa66e19..a0e5e26c0bc9 100644
--- a/drivers/gpu/drm/solomon/ssd130x.c
+++ b/drivers/gpu/drm/solomon/ssd130x.c
@@ -99,29 +99,39 @@ const struct ssd130x_deviceinfo ssd130x_variants[] = {
 		.default_vcomh = 0x40,
 		.default_dclk_div = 1,
 		.default_dclk_frq = 5,
+		.default_width = 132,
+		.default_height = 64,
 		.page_mode_only = 1,
 	},
 	[SSD1305_ID] = {
 		.default_vcomh = 0x34,
 		.default_dclk_div = 1,
 		.default_dclk_frq = 7,
+		.default_width = 132,
+		.default_height = 64,
 	},
 	[SSD1306_ID] = {
 		.default_vcomh = 0x20,
 		.default_dclk_div = 1,
 		.default_dclk_frq = 8,
 		.need_chargepump = 1,
+		.default_width = 128,
+		.default_height = 64,
 	},
 	[SSD1307_ID] = {
 		.default_vcomh = 0x20,
 		.default_dclk_div = 2,
 		.default_dclk_frq = 12,
 		.need_pwm = 1,
+		.default_width = 128,
+		.default_height = 39,
 	},
 	[SSD1309_ID] = {
 		.default_vcomh = 0x34,
 		.default_dclk_div = 1,
 		.default_dclk_frq = 10,
+		.default_width = 128,
+		.default_height = 64,
 	}
 };
 EXPORT_SYMBOL_NS_GPL(ssd130x_variants, DRM_SSD130X);
@@ -798,10 +808,10 @@ static void ssd130x_parse_properties(struct ssd130x_device *ssd130x)
 	struct device *dev = ssd130x->dev;
 
 	if (device_property_read_u32(dev, "solomon,width", &ssd130x->width))
-		ssd130x->width = 96;
+		ssd130x->width = ssd130x->device_info->default_width;
 
 	if (device_property_read_u32(dev, "solomon,height", &ssd130x->height))
-		ssd130x->height = 16;
+		ssd130x->height = ssd130x->device_info->default_height;
 
 	if (device_property_read_u32(dev, "solomon,page-offset", &ssd130x->page_offset))
 		ssd130x->page_offset = 1;
diff --git a/drivers/gpu/drm/solomon/ssd130x.h b/drivers/gpu/drm/solomon/ssd130x.h
index db03ee5db392..a2bc8d75078b 100644
--- a/drivers/gpu/drm/solomon/ssd130x.h
+++ b/drivers/gpu/drm/solomon/ssd130x.h
@@ -37,6 +37,8 @@ struct ssd130x_deviceinfo {
 	u32 default_vcomh;
 	u32 default_dclk_div;
 	u32 default_dclk_frq;
+	u32 default_width;
+	u32 default_height;
 	int need_pwm;
 	int need_chargepump;
 	bool page_mode_only;
-- 
2.40.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ